Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and information about some of the electronic, electrical and electrotechnical Obsolete technology relics that the Frank Sharp Private museum has accumulated over the years .
Premise: There are lots of vintage electrical and electronic items that have not survived well or even completely disappeared and forgotten.

Or are not being collected nowadays in proportion to their significance or prevalence in their heyday, this is bad and the main part of the death land. The heavy, ugly sarcophagus; models with few endearing qualities, devices that have some over-riding disadvantage to ownership such as heavy weight,toxicity or inflated value when dismantled, tend to be under-represented by all but the most comprehensive collections and museums. They get relegated to the bottom of the wants list, derided as 'more trouble than they are worth', or just forgotten entirely. As a result, I started to notice gaps in the current representation of the history of electronic and electrical technology to the interested member of the public.

Following this idea around a bit, convinced me that a collection of the peculiar alone could not hope to survive on its own merits, but a museum that gave equal display space to the popular and the unpopular, would bring things to the attention of the average person that he has previously passed by or been shielded from. It's a matter of culture. From this, the Obsolete Technology Tellye Web Museum concept developed and all my other things too. It's an open platform for all electrical Electronic TV technology to have its few, but NOT last, moments of fame in a working, hand-on environment. We'll never own Colossus or Faraday's first transformer, but I can show things that you can't see at the Science Museum, and let you play with things that the Smithsonian can't allow people to touch, because my remit is different.

There was a society once that was the polar opposite of our disposable, junk society. A whole nation was built on the idea of placing quality before quantity in all things. The goal was not “more and newer,” but “better and higher" .This attitude was reflected not only in the manufacturing of material goods, but also in the realms of art and architecture, as well as in the social fabric of everyday life. The goal was for each new cohort of children to stand on a higher level than the preceding cohort: they were to be healthier, stronger, more intelligent, and more vibrant in every way.

The society that prioritized human, social and material quality is a Winner. Truly, it is the high point of all Western civilization. Consequently, its defeat meant the defeat of civilization itself.

Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

OLD, but ORIGINAL, Well made, Funny, Not remotely controlled............. and not Made in CHINA.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

Every CRT Television saved let revive knowledge, thoughts, moments of the past life which will never return again.........

Many contemporary "televisions" (more correctly named as displays) would not have this level of staying power, many would ware out or require major services within just five years or less and of course, there is that perennial bug bear of planned obsolescence where components are deliberately designed to fail and, or manufactured with limited edition specificities..... and without considering........picture......sound........quality........
..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

Have big FUN ! !
-----------------------
©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All sets and apparates appearing here are property of Engineer Frank Sharp. NOTHING HERE IS FOR SALE !
All posts are presented here for informative, historical and educative purposes as applicable within Fair Use.


Monday, January 31, 2011

SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 INTERNAL VIEW..















The SCHNEIDER CHASSIS DTV2 is the successor of the DTV1 first Schneider Digital television.

IT'S THE MOST INTEGRATED DIGITAL TV CHASSIS AT THE TIME TOGHETHER WITH LOEWE'S C9000 SERIES.

The main differences are in improvements related in power panel which result in minor heating and better reliability and performance / The SMPS Transformer is bigger and better built / cooling  is bettered.

In the digital panel were implemented a faster version of the DIGIVISION ITT DIGIT 2000 CHIPSET and better reliability and performance.

The SCHNEIDER CHASSIS DTV2 corrects some imperfections which were in DTV1 cause of faults expecially produced by hot parts in Power/deflection panel board.

The SCHNEIDER CHASSIS DTV-2 features the DIGIVISION ITT DIGIT 2000 CHIPSET.

It's divided in two fundamental panels.

The digital board (Video and audio digital processing + CPU)

The power board (Power supply and deflections + EHT)

Was also used in: Schneider STV7206 / DUAL STV6156, TV1155, TV1163, TV1170, TV150, TV1551, TV160, TV170, TV4155, TV4163, TV4170, TVM4155, TVM4163, TVM4170, TVM4185 / TEAC CT-M10 / STV7158


Micom - CCUS7916 (ITT)
Memory - ITT MDA2062-21 & MDA2062-32
DRAM - KM4164B-15
SMPS - Thomson TEA2164 & BUV70
TR Chopper - VOGT XN 545 39 00100 3234-38391
SAW -
Secam - SPU2243 (ITT)
Delay -
Video - VCU2136A & PVPU2204 (ITT)
VIF - TDA4453 & TDA4455 (TFK)
Vertical - LM393 & BD683
Teletext - TPU2732 (ITT)
Sound - TDA2009 (Thomson)
SIF - U2829 (TFK)
Stereo - ADC2311E & APU2471 (ITT)
Tuner - 2001DHC
TV/AV -
Tube - Videocolor / ITT / PHILIPS
FBT - DST85B243C 472 941-02 3243-31692
HOT - BU508A (PHILIPS)
RGB Amp. - BC558B, BF422S, BF423, BF871

IC remote -
PLL - MEA2901 (ITT)
Digital Transient Improvement - DTI2223 (ITT)
Clock Generator - MCU2600-53 (ITT)
Deflection - DPU2553 (ITT)
Other ICs - U353M (TFK)




















































CHASSIS DTV2 Detaile Power / deflection Panel board.

Power supply and deflections panel board.

- Power supply with TEA2164, line synchronized.

- E/W Correction with SSEWC circuit (Switched Synchronous E/W correction)

- Frame deflection with SSVD circuit (Switched Synchronous vertical deflection) with 1 transistor.


This ,SCHNEIDER DTV2,  chassis was also used in models: DUAL STV4255, TV1155, TV1163, TV1170, TV150, TV160, TV170, TV4155, TV4163, TV4170, TV4270, TV4570, TVM4155, TVM4163, TVM4170, TVM4185 FISHER FTMS163 HANSEATIC DTV7032-11 SCHNEIDER 33413-38395, 9028FINALE, CTV2706, S6156, STV1056VT, STV5540M, STV6056, STV6058SAT, STV6156NICAM, STV6157FEDIV, STV6216, STV6555, STV6556NICAM, STV7023, STV7027, STV7050, STV7056NICAM, STV706, STV7156NICAM, STV7158SAT, STV7166NICAM, STV7306M, STV9028, STV9163VT

SCHNEIDER  STV707  DTV-2
TEA2164 /2165 SWITCH MODE POWER SUPPLY PRIMARY CIRCUIT

.POSITIVE AND NEGATIVE OUTPUT CURRENT
UP TO 1.2AAND – 1.7A .A TWO LEVEL COLLECTOR CURRENT LIMITATION
.COMPLETE TURN OFF AFTER LONG DURATION
OVERLOADS .UNDER AND OVER VOLTAGELOCK-OUT .SOFT START BY PROGRESSIVE CURRENT
LIMITATION .DOUBLE PULSE SUPPRESSION .BURST MODE OPERATION UNDER STANDBY
CONDITIONS
DESCRIPTION
In amaster slave architecture, the TEA2164control
IC achieves the slave function. Primarily designed
for TV receivers and monitors applications, this
circuit provides an easy synchronizationand smart
solution for low power stand by operation.
Located at the primary side the TEA2164 Control
IC ensures :
- the power supply start-up
- the power supply control under stand-by conditions
- the process of the regulation signals sent by the
master circuit located at the secondary side
- directbasedrive of the bipolarswitching transistor
- the protection of the transistor and the power
supply under abnormal conditions.

II. GENERAL DESCRIPTION
In a master slave architecture, the TEA2164 Control
IC, located at the primary side of an off line
power supply achievesthe slave function ;whereas
the master circuit is located at the secondary side.
The link between both circuits is realized by a small
pulse transformer

In the operation of the master-slave architecture,
four majors cases must be considered :
- normal operating
- stand-bymode
- power supply start-up
- abnormal conditions : off load, short circuit, ...
II.1. Normal Operating (master slave mode)
In this configuration, the master circuit generatesa
pulse widthmodulatedsignal issued from themonitoring
of the output voltage which needs the best
accuracy (in TV applications : the horizontal deflection
stagesupplyvoltage).Themaster circuit power
supply can be supplied by another output.
The PWM signal are sent towards the primary side
through small differentiating transformer. For the
TEA2164 positive pulses are transistor switchingon
commands ; and negative pulses are transistor
switching-offcommands (Figure 4). In this configuration,
only by synchronizing the master oscillator,
the switching transistor may be synchronized with
an external signal.
II.2. Stand-by Mode
In this configuration the master circuit no longer
sends PWM signals, the structure is not synchronized
; and the TEA2164 operates in burst mode.
The average power consumption at the secondary
side may be very low 1W 3 P 3 6W (as it is
consumed in TV set during stand by).
By action on the maximum duty cycle control, a
primary loop maintains a semi-regulation of the
output voltages.Voltage on feed-back is applied on
Pin 9.
Burst period is externally programmedby capacitor
C1.
II.3. Power Supply Start-up
After the mains have been switched-on, the VCC
storage capacitor of the TEA2164 is charged
through a high value resistor connected to the
rectified high voltage.When Vcc reaches VCC start
threshold (9V typ), the TEA2164 starts operatingin
burst mode. Since available output power is low in
burst mode the output power consumption must
remain low before complete setting-up of output
voltage. In TV application it can be achieved by
maintaining the TV in stand-by mode during startup.

Overvoltage Protection
When VCC exceeds VCC max, an internal flip-flop
stops output conduction signals. The circuit will
start again after the capacitor C1 discharge ; it
means : after loss of synchronization or after Vcc
stop crossing (Figure 7).
In flyback converters, this function protects the
power supply against output voltage runaway.

SCHNEIDER  STV707  DTV-2-7025-11 (49474A) Synchronized switch-mode power supply:

In a switch mode power supply, a first switching transistor is coupled to a primary winding of an isolation transformer. A second switching transistor periodically applies a low impedance across a second winding of the transformer that is coupled to an oscillator for synchronizing the oscillator to the horizontal frequency. A third winding of the transformer is coupled via a switching diode to a capacitor of a control circuit for developing a DC control voltage in the capacitor that varies in accordance with a supply voltage B+. The control voltage is applied via the transformer to a pulse width modulator that is responsive to the oscillator output signal for producing a pulse-width modulated control signal. The control signal is applied to a mains coupled chopper transistor for generating and regulating the supply voltage B+ in accordance with the pulse width modulation of the control signal.

Description:

The invention relates to switch-mode power supplies.

Some television receivers have signal terminals for receiving, for example, external video input signals such as R, G and B input signals, that are to be developed relative to the common conductor of the receiver. Such signal terminals and the receiver common conductor may be coupled to corresponding signal terminals and common conductors of external devices, such as, for example, a VCR or a teletext decoder.

To simplify the coupling of signals between the external devices and the television receiver, the common conductors of the receiver and of the external devices are connected together so that all are at the same potential. The signal lines of each external device are coupled to the corresponding signal terminals of the receiver. In such an arrangement, the common conductor of each device, such as of the television receiver, may be held "floating", or conductively isolated, relative to the corresponding AC mains supply source that energizes the device. When the common conductor is held floating, a user touching a terminal that is at the potential of the common conductor will not suffer an electrical shock.

Therefore, it may be desirable to isolate the common conductor, or ground, of, for example, the television receiver from the potentials of the terminals of the AC mains supply source that provide power to the television receiver. Such isolation is typically achieved by a transformer. The isolated common conductor is sometimes referred to as a "cold" ground conductor.

In a typical switch mode power supply (SMPS) of a television receiver the AC mains supply voltage is coupled, for example, directly, and without using transformer coupling, to a bridge rectifier. An unregulated direct current (DC) input supply voltage is produced that is, for example, referenced to a common conductor, referred to as "hot" ground, and that is conductively isolated from the cold ground conductor. A pulse width modulator controls the duty cycle of a chopper transistor switch that applies the unregulated supply voltage across a primary winding of an isolating flyback transformer. A flyback voltage at a frequency that is determined by the modulator is developed at a secondary winding of the transformer and is rectified to produce a DC output supply voltage such as a voltage B+ that energizes a horizontal deflection circuit of the television receiver. The primary winding of the flyback transformer is, for example, conductively coupled to the hot ground conductor. The secondary winding of the flyback transformer and voltage B+ may be conductively isolated from the hot ground conductor by the hot-cold barrier formed by the transformer.

It may be desirable to synchronize the operation of the chopper transistor to horizontal scanning frequency for preventing the occurrence of an objectionable visual pattern in an image displayed in a display of the television receiver.

It may be further desirable to couple a horizontal synchronizing signal that is referenced to the cold ground to the pulse-width modulator that is referenced to the hot ground such that isolation is maintained.

A synchronized switch mode power supply, embodying an aspect of the invention, includes a transfromer having first and second windings. A first switching arrangement is coupled to the first winding for generating a first switching current in the first winding to periodically energize the second winding. A source of a synchronizing input signal at a frequency that is related to a deflection frequency is provided. A second switching arrangement responsive to the input signal and coupled to the second winding periodically applies a low impedance across the energized second winding that by transformer action produces a substantial increase in the first switching current. A periodic first control signal is generated. The increase in the first switching current is sensed to synchronize the first control signal to the input signal. An output supply voltage is generated from an input supply voltage in accordance with the first control signal.




THOMSON  TEA2162 / TEA2164 / TEA2165  WORKING OF A CHOPPED POWER SUPPLY CONTROL CIRCUIT WITH AUTOMATIC START-UP:
 
 
Inventors: De Sartre, Jean (Meylan, FR) ; Thomson-csf (Paris, FR) 
 
 The invention provides an integrated chopped power supply control circuit intended to receive regulation control signals and to produce square waves for enabling a switch. It comprises automatic start up means producing, in the absence of regulation signals, bursts of start up attempts with a very low recurrence period. Each burst lasts about 10% of this period and is followed by a rest time.



  1. A chopped power supply control circuit intended to receive periodic regulation control signals and to produce periodic square waves enabling a main switch of the power supply, the square waves having a variable width as a function of their regulation control signals, which circuit comprises:

means for detecting the presence of regulation control signals,

a very low frequency oscillator controlled by the detection means, this oscillator producing, in the absence of regulation signals, a succession of very low frequency periodic cycles, the oscillator being inhibited by the regulation control signal detection means,

a high frequency oscillator producing chopping signals palliating the absence of regulation signals for producing enabling square waves,

an inhibition means for allowing transmission of the chopping siganls to the switch only during a first phase of each very low frequency periodic cycle and for preventing such transmission during the rest of the cycle, the first phase of each cycle having a duration which is long compared with the period of the high frequency oscillator and short compared with the period of the very low frequency oscillator.


2. The control circuit as claimed in claim 1, wherein said high frequency oscillator has a free oscillation period slightly greater than the period of the regulation control signals and it is synchronized by these signals when they are present.

3. The control circuit as claimed in claim 1, wherein the regulation control signals comprise a positive pulse followed by a negative pulse, one of them being used for synchronizing the high frequency oscillator, the positive pulse being transmitted through the inhibition means to a set input of a flip flop for triggering off the beginning of conduction of the main switch, and the negative pulse being transmitted to a reset input of the flip flop for causing stopping of the conduction of the switch.

4. The control circuit according to claim 1 further comprising:

a threshold comparator for receiving a signal measuring the current in said switch and for outputting a signal stopping the conduction of said switch when a threshold is exceeded;

means for varying the threshold of said comparator including a means for producing a first threshold value during normal operation of said circuit, a means for producing a second threshold value at the beginning of said first phase of said very low frequency cycle, said second threshold corresponding to a current in said switch which is lower than during said normal operation, and a means for producing a gradually decreasing threshold during said first phase of said very low frequency cycle.


5. The control circuit as claimed in claim 4, wherein said very low frequency oscillator is a relaxation oscillator delivering a saw tooth signal and the means for varying the threshold is driven by the output of the very low frequency oscillator.

6. The control circuit as claimed in one of claims 4 and 5, wherein another threshold converter is provided receiving a signal of measurement of the current in the main switch and delivering a signal for complete inhibition of enabling of the switch when the current in the switch exceeds a third threshold value higher than the first value.

7. The control circuit as claimed in claim 6, wherein said inhibition signal delivered by the other comparator is cancelled out when the circuit, after having partially or totally ceased to be supplied with power, is again normally supplied.

Description:

BACKGROUND OF THE INVENTION

1. Field of the Invention

The present invention relates to stabilized power supplies called chopped power supplies.

A chopped power supply operates in the following way: a transformer primary winding receives a current which comes for example from a rectifier bridge receiving the power from the AC mains. The current in the transformer is chopped by a switch (for example a power transistor) placed in series with the primary winding.

A circuit controlling the transistor establishes periodic square waves for enabling the transistor. For the duration of the square wave the current is allowed to pass; outside the square wave, the passage of the current is prevented.

On one (or more) secondary windings of the transformer an AC voltage is then collected. This voltage is rectified and filtered so as to obtain a DC voltage which is the DC output voltage of the chopped power supply.

To stabilize the value of this DC voltage, the cyclic periodic conduction ratio of the switch is adjusted, that is to say the ratio between the conduction time and the disablement time in a chopping period.

2. Discussion of Background

In a chopped power supply architecture proposed by the applicant and shown in FIG. 1, two integrated circuits are used. One of the circuits, CI1, serves for controlling the base of a power transistor Tp for applying thereto periodic enabling and disabling control signals. The space control circuit CI1 is placed on the primary winding side (EP) of the transformer (TA) for reasons which will be better understood further on in the description. The integrated circuit, regulation circuit CI2, is on the contary placed on the secondary side (winding ES1) and its serves for examining the output voltage Vs of the power supply for elaborating regulation signals which it transmits to the first integrated circuit through a small transformer TX. The first integrated circuit CI1 uses these regulation signals for modifying the cyclic conduction ratio of the switching transistor TP and thus for regulating the output voltage Vs of the power supply.

We will come back in more detail hereafter to the circuit shown in FIG. 1.


Numerous problems arise during designing of a chopped power supply, and the problems with which we will be particulary concerned here are problems of starting up the power supply and problems of safety should over voltages or over currents occur at different points in the circuit. The first problem which is met with is that of starting up the power supply : on switching on, the regulation circuit CI2 will tend to cause the base control circuit CI1 to generate square waves of maximum cyclic ratio until the power supply has reached its nominal output voltage. This is all the more harmful since there is then a heavy current drain on the side of the secondary windings which are connected to initially discharged filtering capacitors. There is a risk of destruction of the power transistor through over-currents during the start-up phase.

Progressive start-up circuits have already been proposed which limit the duration of the enabling square waves during a start-up phase, on switching on the device; the U.S. Pat. No. 3,959,714 describes such a circuit in which charging of a capacitor from switch-on defines initially short square waves which gradually increase in duration until these square waves reach the duration which the regulation circuit normally assigns thereto. The short square waves have priority; but, since they become gradually longer during the start-up phase, after a certain time they cease to have priority; this time is defined by the charging time constant of the capacitor.

Another problem which arises is the risk of accidental overcurrents, or sometimes overvoltages which may occur in the circuit. These over-currents and over-voltages may cause damage and often result in the destruction of the power transistor if nothing is done to eliminate them. In particular, a short circuit at the output of the stabilized power supply rapidly destroys the power transistor. If the short circuit occurs on start-up of the power supply, it is not the gradual start-up system with short square waves which gradually increase which will allow the over-currents resulting from this short circuit to be efficiently accomodated.

Finally, another problem, particularly important in an architecture such as the one shown in FIG. 1, is the risk of disappearance of the regulation signals which should be emitted by the regulation circuit CI2 and received by the base control circuit CI1: these signals determine not only the width of the square waves for enabling the power transistor but also their periodicity; in other words, they serve for establishing the chopping frequency, possibly synchronized from a signal produced on the secondary side of the transformer. The disappearance of these signals causes a particular disturbance which must be taken into account.

Furthermore, the architecture of FIG. 1, in which the secondary circuits have been voluntarily separated galvanically from the primary circuits, is such that the base control circuit may function rapidly after switch on, as will be explained further on, whereas the regulation circuit CI2 can only function if the chopped power supply is in operation; consequently, at the beginning, the base control circuit CI1 does not receive any regulation signals and this difficulty must be taken into account.

SUMMARY OF THE INVENTION

In an attempt to resolve as well as possible the whole of these different problems which relate to safety against accidental disturbances in the operation of the power supply (initial start-up being able to be considered moreover as transitory disturbed operating phase), the present invention proposes an improved chopped power supply control circuit which accomplishes a function of gradual start-up of the power supply on switch-on and a function of passing to the safety mode should a malfunction occur such as a disappearance of appropriate regulation signals: the safety mode consists of a succession of very low frequency periodic cycles, each cycle consisting in a gradual start-up attempt during a first phase which is short compared with the period of the cycle and long compared with the chopping period of the chopped power supply, the first phase being followed by a pause at the end of the cycle, and periodic cycles succeeding each other until normal operation of the power supply is established or re-established; a very low frequency oscillator establishes these cycles when the power supply is not normal operating conditions (start up or malfunction); this oscillation is disabled when normal operation is ascertained; a high frequency oscillator generates a burst of chopping signals palliating the absence of regulation signals; these signals are transmitted solely during the first phase of each cycle; they are inhibited during the second phase.

According to a very important characteristic of the invention; gradual start-up operates not by limiting the duration of the square waves from the charging of a capacitor with a fixed time constant, but by limiting the current in the power transistor to a maximum value, this maximum value increasing gradually during the start-up phase, overshooting of this current value causing interruption of the power transistor.

Thus, even in the case of a quasi short circuit, the value of a current in the transistor is limited, which was not the case in gradual start-up circuits of the prior art.

More precisely, the chopped power supply control circuit, intended to receive periodic regulation control signals and to produce periodic square waves for enabling a main switch of the power supply, the square waves having a variable width depending on the regulation control signals; comprises:

a means for detecting the presence of regulation control signals,

a very low frequency oscillator controlled by the detection means, this oscillator establishing, in the case of absence of regulation signals, a succession of very low frequency periodic cycles, the oscillator being inhibited by the detection means when regulation control signals are present,

a high frequency oscillator producing chopping signals palliating the absence of regulation signals for producing enabling square waves,

an inhibition means only allowing chopping signals to be transmitted to the switch during a first phase of each very low frequency periodic cycle and for preventing such transmission during the rest of the cycle, the first phase of each cycle having a duration which is long compared with the period of the high frequency oscillator and short compared with the period of the very low frequency oscillator.

Preferably, the high frequency oscillator has a free oscillation period slightly greater than the period of the regulation control signals and it is synchronized by these signals when they are present.

The regulation control signals may comprise a positive pulse followed by a negative pulse, one of them serving for synchronizing the high frequency oscillator, the positive pulse being transmitted through the inhibition means to a set input of a flip flop for enabling the switch, whereas the negative pulse is transmitted to the reset input of this flip flop for disabling.

In so far as limiting the current to a gradually increasing value during the start-up cycles is concerned, a threshold comparator (92) is preferably provided receiving a signal for measuring the current in the switch in order to generate a signal for disabling the switch should the threshold be exceeded and a means (90) for causing the threshold of the comparator to vary in the following way:

under normal operating conditions the threshold is fixed at a first value;

at the beginning of the first phase of each very low frequency periodic cycle, the threshold passes suddenly from the first value to a second value corresponding to a lower current in the switch;

during the first phase of each cycle the threshold passes gradually back from the second value to the first one.

BRIEF DESCRIPTION OF THE DRAWINGS

Other features and advantages of the invention will be clear from the following detailed description made with reference to the accompanying drawings in which:

FIG. 1 shows a general chopped power supply diagram using two integrated circuits placed respectively on the primary side and on the secondary side of a transformer,

FIG. 2 shows a diagram of an integrated circuit for controlling the power transistor placed on the primary side,

FIGS. 3 to 6 show timing diagrams of signals at different points of the circuit, and

FIG. 7 shows a circuit detail for producing a variable threshold.

DESCRIPTION OF THE PREFERRED EMBODIMENTS

Referring again to FIG. 1, which represents a chopped power supply architecture given by way of example illustrating the utility of the invention, the line of the public electric mains has been designated by the reference 10 (mains at 100 or 220 volts, 50 or 60 hertz). This line is connected through a filter 12 to the input of a rectifier bridge 14 whose output is connected on the one hand to a primary electric ground, shown throughout by a black triangle pointing downward and, on the other hand, to one end of the primary winding EP of the power transformer TA.

A filtering capacitor 16 is placed in parallel across the outputs of the rectifier bridge 14. The other end of the primary winding is connected to the collector of a switching transistor TP whose emitter is connected to the primary ground through a small current measuring resistor 18.

The transformer has several secondary windings which are preferably isolated galvanically from the mains and connected for exmaple to a secondary electric ground isolated galvanically from the primary ground.

Here, each of the secondary windings has one end connected to the secondary ground. The other end feeds a respective low pass filtering capacitor through a respective rectifier diode.

The description hereafter will refer to a single secondary winding ES1, connected by a diode 20 to a capacitor 22. The DC output voltage of the chopped power supply is the voltage Vs at the terminals of the capacitor 22; but of course other DC output voltages may be obtained at the terminals of the other filtering capacitors connected to secondary windings. These output voltages forms stabilized power supply voltages for user circuits not shown. By way of example, a secondary winding ES2 supplies a stabilized voltage of a few volts for the integrated regulation circuit CI2, which has already been discussed. It can be verified therefore in this connection that this circuit is not fed with power and cannot therefore deliver signals as long as the chopped power supply is not operating.

The same goes a priori for the integrated circuit CI1 controlling the base of the power transistor TP, which circuit is supplied with a stabilized voltage delivered from a secondary winding ES3, a diode 24 and a capacitor 26 (it will be noted in passing that this winding, although a secondary winding, is connected to the primary ground and not to the secondary ground, for the very simple reason that the integrated circuit CI1 is necessarily coupled galvanically to the primary).

However, since start-up of the chopped power supply must be ensured, it is provided for the power supply terminal 28 of the integrated circuit CI1 to be also connected directly to the mains through a high resistor 30 and a diode 32; this is possible since the integrated circuit CI1 is connected to the primary gorund; this is not possible for the integrated circuit CI2 which must remain galvanically isolated from the mains. As soon as the chopped power supply is operating normally, the stabilized DC voltage delivered by winding ES3 and diode 24 take precedence over the voltage from the mains and diode 32; this diode 32 is disabled and the direct supply from the mains no longer occurs after the initial start-up phase.

The role of integrated circuits CI1 and CI2 will now be described.

The regulation circuit CI2 receives, from a divider bridge 34 placed at the terminals of the capacitor 22 that is to say at the output of the stabilized power supply, information concerning the value of the voltage to be stabilized Vs.

This information is compared with a reference value and applied to a pulse width modulator which produces periodic square waves of variable width depending on the value of the output voltage Vs; the lower Vs the wider the square waves.

The square waves are produced at the chopping frequency of the chopped power supply. This frequency is therefore established on the secondary side of the circuit; it is generated either inside circuit CI2, or outside in a circuit not shown, in the form of a saw tooth voltage at the chosen chopping frequency. This saw tooth voltage is used in a way known per se for obtaining width modulation.

The variable width square waves, at the chopping frequency, are applied to a primary winding 36 of a small transformer TX whose secondary winding 38, isolated galvanically from the primary, delivers positive and negative pulses at the rising and falling fronts respectively of the variable width square waves.

It is these pulses, whose position and frequency are determined by the regulation circuit CI2, which form regulation signals applied to an input 40 of the base control circuit CI1.

Transformer TX is formed by a few turns wound on a ferrite rod, the turns of the primary and the turns of the secondary being sufficiently spaced apart from each other for complying with the standards of galvanic isolation between primary circuits and secondary circuits in the chopped power supply.

The integrated base control circuit CI1 comprises different inputs among which have already been mentioned a power supply input 28 and a regulation signal input 40; a current measuring input 44 is connected to the current measuring resistor 18; an inhibition input monitors the magnetization condition of a transformer. Finally, inputs may be provided for connecting elements (resistors, capacitors) which should form part of the integrated circuit itself but which, for technological reasons (space) or for practical reasons (possiblities of adjustment by the user) are mounted on the outside.

The integrated circuit CI1 finally comprises an output 46 which is intended to be coupled by direct galvanic coupling to the base of the power transistor Tp. This output delivers square waves for enabling and disabling the transistor Tp.

FIG. 2 shows the general architecture of the integrated circuit CI1, limited to the elements which relate more particularly to the invention.


The output 46 of the circuit is the output of a push-pull amplification stage designated as a whole by the reference 48, this stage comprising preferably two separate amplifiers one of which receives enabling square waves and the other of which receives disabling signals formed by enabling square waves inverted and delayed by a few microseconds. Such amplifiers are now well known.

The enabling signals are delivered by a logic flip flop 50 having a set input 52 and a reset input 54. The set input causes the power transistor to be enabled. The reset input causes it to be disabled.

The set input 52 receives the pulses which pass through a logic AND gate 58, so that enabling only occurs if several conditions are simultaneously satisfied; one unsatisfied condition will be sufficient to inhibit enabling.

The reset input 54 receives the pulses which pass through a logic OR gate 60, so that disabling (after enabling) will occur as soon as a disabling signal is present at one of the inputs of this gate.

In the diagram of FIG. 2, the AND gate 58 has three inputs. One of these inputs receives periodic pulses from an output 62 of a high frequency oscillator 64; the other inputs serve for inhibiting the transmission of these pulses.

The oscillator defines the periodicity of the chopping of the power supply (20 kilohertz for example). Under normal operating conditions, the oscillator is synchronized by the regulation signals; under start-up conditions, it is self oscillating at a free frequency defined by the values of a resistor Ro and a capacitor Co external to the integrated circuit CI1 and connected respectively to an access terminal 66 and an access terminal 68. The free frequency fo is in theory slightly lower than the normal chopping frequency.

Oscillator 64 is a relaxation oscillator which produces at an output 70 a saw tooth whose zero return is caused by the appearance of a positive pulse arriving at terminal 40. This is why oscillator 64 is shown with one input connected to an output 72 of a separation and shaping circuit 74 which receives the regulation signals from terminal 40 and shapes them while separating the positive pulses from the negative pulses. The shaping circuit 74 has two outputs; 72 for the positive pulses, 76 for the negative pulses (the notation of positive pulses, negative pulse will be kept for distinguishing the enabling pulses and the disabling pulses even if the shaping circuit produces pulses of the same sign at both its outputs 72 and 76).

Oscillator 64 has two outputs: one output 70 delivering a saw tooth and one output 62 delivering a short pulse at the time of the zero return of the saw tooth.

A pulse width modulator 78 is connected on the one hand to the output 70 of the oscillator and on the other to a reference voltage adjustable by means of a resistor R1 external to the integrated circuit and connected to a terminal 80 giving access to the circuit. Modulator 78 delivers periodic square waves synchronized with the signals of the oscillator, these square waves defining a maximum conduction duration Tmax beyond which the power transistor must be disabled in any case for safety reasons. These square waves and modulator 78 are applied to an input of the OR gate 60. The duration Tmax is adjustable by means of the external resistor R1.

The elements which have just been described ensure the essential part of the operation under normal conditions of the integrated circuit CI1. The following elements are more specifically provided for controlling abnormal operation or start-up of the power supply.

A very low frequency oscillator 82 is connected to an external capacitor C2 through an access terminal 86. This external capacitor allows the very low frequency oscillation to be adjusted. The frequency may be 1 hertz for example.

Oscillator 82 is a relaxation oscillator delivering a saw tooth. This saw tooth is applied on the one hand to a threshold comparator 88 which causes periodic square waves to be produced synchronized with the very low frequency saw tooth of the oscillator. These square waves have a brief duration compared with the period of a saw tooth; this duration is fixed by the threshold of comparator 88; it may be for example be 10% of the period; it must be long compared with the free oscillation period of the high frequency oscillator 64 so that a burst of numerous pulses from the high frequency oscillator may be emitted and used during this 10% of the very low frequency period; this burst defines at start-up attempt during the first part of a start-up cycle; it is followed by a pause during the rest of the period, i.e. during the remaining 90%.

The oscillator only serves at start up; it is inhibited when regulation signals appear at terminal 40 and indicate that the chopped power supply is operating. This is why a control has been shown for inhibiting this oscillator, connected to the output 72 of the shaping circuit 74 through a flip flop 89. This flip flop switches under the action of the pulses appearing at the output 72. It is brought back to its initial state by the output 62 of oscillator 64 when there are no longer any pulses at output 71.

The saw teeth of the very low frequency oscillator are further transmitted to a circuit 90 producing a variable threshold whose purpose is to produce a threshold signal (current or voltage) having a first value Vs1 under normal operating conditions, and a threshold cyclically variable between a first value and a second value under start-up conditions. The method of varying this threshold will be described further on, but it may already be noted that the variation is driven by the very low frequency saw tooth.

The threshold signal produced by circuit 90 is applied to an input of a comparator 92 another input of which is connected to the terminal 44 already mentioned, for receiving at this input a signal representative of the amplitude of the current flowing through the power switch. The output of comparator 92 is applied to an input of the OR gate 60. It therefore acts for disabling the power transistor Tp, after it has been enabled, disabling occurring as soon as overshooting of the threshold (fixed or variable) defined by circuit 90 has been detected.

Another threshold comparator 94 has one input connected to the current measuring terminal 44 whereas another input receives a signal representing a third threshold value Vs3. The third value Vs3 corresponds to a current in the switch higher than the first value Vs1 defined by the circuit 90. The output of comparator 94 is connected through a storage flip flop 96 to an input of the AND gate 58 so that, if the current in the power switch exceeds the third threshold value Vs3, disabling of transistor Tp is not caused (such disabling being caused by the comparator 92) but any new enabling of the transistor is inhibited. Such inhibition lasts until the flip flop 96 is switched back to its initial state corresponding to normal operation.

In theory, this resetting will only take place when the integrated circuit CI1 has ceased to be supplied normally with power and is again switched on. For example, resetting of flip flop 96 is caused through a hysteresis threshold comparator 98 which compares a fraction of the power supply voltage Vcc of the circuit (taken from terminal 28) with a reference value and which resets the flip flop when Vcc first passes above this reference after dropping below another reference value lower than the first one (hysteresis).

Finally, it may be stated that the output of the flip flop 89 (which detects the presence of regulation signals at terminal 40 therefore normal operation of the power supply), is connected to an input of an OR gate 100 which receives at another input the output of comparator 88 so that the output of comparator 88 ceases to inhibit enabling of transistor Tp (inhibition during 90% of the very low frequency cycles) as soon as operation of the power supply has become normal.

OPERATION OF THE BASE CONTROL CIRCUIT

This operation will be described by illustrating it with voltage wave forms inside the chopped power supply and inside the integrated circuit CI1.

(a) Start-up on switching on

At the outset, the integrated circuit is not supplied with power at all.

The voltage at the power supply terminal 28 increases from 0 to a value Vaa which is not the nominal value Vcc but which is a lower value supplied by diode 32 and resistor 30 (cf. FIG. 1) as long as the chopped power supply does not deliver its nominal output voltage Vcc at terminal 28. Vaa is a voltage sufficient for ensuring practically normal operation of all the elements of the circuit CI1. Vaa is also sufficient for reinitializing the flip flop 96 which, as soon as that happens, no longer inhibits enabling of the power transistor Tp.

There are no regulation signals at the input 40. Consequently, the high frequency oscillator oscillates with its free frequency and the very low frequency oscillator also oscillates (it is not inhibited by the flip flop 89 since this latter does not receive any regulation signals from the output 72 of the shaper circuit 74).

The very low frequency oscillator 82 and comparator 88 define periodic cycles of start-up attempts repeated at a very low frequency.

Each cycle comprises a first part defined by the square waves of short duration at the output of comparator 88, and a second part formed by the end of the very low frequency period; the first part is an effective attempt at start-up. The second part is a pause if the effective attempt has failed. The pause lasts much longer than the effective attempt so as to limit power consumption.

During the first part of the cycle, the enabling signals delivered by the high frequency oscillator 64 are allowed to pass through the AND gate 58. They are then prevented from passing. Each pulse from the output 62 of the oscillator 64 enables the transistor Tp. There is therefore a burst of enabling pulses which is emitted for about 10% of the very low frequency period.

During start-up, the current intensities in the transistor tend to be very high. It is essentially comparator 92 which causes interruption of the conduction, after each enabling pulse delivered by oscillator 64, as soon as the current exceeds the threshold imposed by the variable threshold elaboration circuit 90. If comparator 92 does not cause enabling, modulator 78 will do so in any case at the end of the time Tmax.

The threshold elaboration circuit, which delivers to the comparator 90 a first fixed threshold value Vs1 under normal operating conditions (i.e. when the very low frequency oscillator 82 is disabled by the flip flop 89), delivers a variable threshold as a function of the saw tooth of the very low frequency oscillator in in the following way:

at the initial outset of a start-up attempt cycle (beginning of the saw tooth or zero return of the preceding saw tooth), the threshold passes suddenly from the first value Vs1 to a second value Vs2 corresponding to a lower current than the first value, then this threshold increases gradually (because driven by the very low frequency saw tooth) from the second value to the first. The growth time coincides preferably with the duration of a start-up attempt square wave (i.e. about 10% of the very low frequency period).

Then the threshold is stabilized at the first value Vs1 until the end of the period, but in any case if the circuit has not started up at that time, comparator 88 closes gate 58, through the OR gate 100 and inhibits any further enabling of the power transistor during the rest of the very low frequency period (90%). It is then the second part of the start-up attempt cycle which takes place: a pause during which the pulses of oscillator 64 are not transmitted through the AND gate 58.

Thus, the start-up cycles act from two points of view: on the one hand, a burst of enabling pulses is emitted (10% of the time) then stopped (90% of the time) until the next cycle; on the other hand, during this burst, the current limitation threshold passes gradually from its second relatively low value to its normal higher value.

Consequently, if the peak amplitude of the current in transistor Tp is observed during the start-up bursts, it can be seen that in practice it increases linearly from the second value to the first. Thus gradual start-up is obtained by a much more efficient action than that which consists simply for example in causing the duration Tmax to increase from a low value to a nominal value.

If start-up is not successful, a new burst of enabling pulses is transmitted during the first part of the next cycle (it will be recalled that this cycle is repeated about once per second and that the burst may last 100 milliseconds).

If start-up is successful, regulation signals appear at terminal 40. These signals are shaped by circuit 74. They cause the very low frequency oscillator 82 to be stopped by the flip flop 89 which prevents the zero return of the saw tooth. Furthermore, flip flop 89 sends through the OR gate 100 a signal for cancelling out the inhibition effect imposed by the comparator 88. Finally, as soon as start-up is successful, the regulation signals cause the high frequency oscillator 64 to be synchronized.

FIG. 3 illustrates the high frequency signals during the start-up period:


line a: saw tooth at the output 70 of the oscillator 64 (free oscillation at frequency fo, period To),

line b: pulses for enabling the transistor Tp : these pulses coincide with the zero return of the saw tooth signal (output 62 of oscillator 64);

line c: output square waves from modulator 78 defining the maximum cyclic conduction time of the transistor,

line d: pulses delivered comparator 92 when the current in the switch exceeds the threshold (gradually increasing during start up) defined by the circuit 90.

The conduction of transistor Tp, after being enabled by a pulse from line b, is stopped either by the square waves of line c if the current threshold is not exceeded, or by an output pulse from comparator 92.

FIG. 4 shows the very lwo frequency signals during the start-up cycles. The diagrams are not to the same time scale as in FIG. 3 since it will be recalled that an example of the frequency of the high frequency oscillator 64 is 20 kilohertz whereas an example of the very low frequency of oscillator 82 is 1 hertz. The high frequency pulses have however been shown symbolically in FIG. 4, in number more limited than in reality for facilitating the representation.

line e: saw tooth output of the very low frequency oscillator (frequency f2, period T2),

line f: output of comparator 88 showing the first phase (start-up attempt by allowing conduction of transistor Tp) and the second phase (pause by inhibiting the conduction of each very low frequency start up cycle,

line g: pulses delivered by the freely oscillating high frequency oscillator,

line h: bursts of enabling pulses at the output of the AND gate 58,

line i: diagram of the cyclic variation of the threshold produced by circuit 90 during the start-up cycles: fixed value Vs1 in theory, sudden drop to Vs2 at the beginning of the very low frequency saw tooth, and gradual rise from Vs2 to Vs1, driven by the linear growth of the saw tooth, during the start-up burst.

(b) Operation of the power supply under normal established operating
conditions

The very low frequency oscillator is not operating.

The high frequency oscillator is synchronized by the regulation signals.

The zero return of the high frequency saw tooth, coinciding with the positive pulses of the regulation signals, causes enabling of transistor Tp (no inhbition by the AND gate 58 during normal operating conditions). The negative pulses cause disabling, through the OR gate 64, except if such disabling has been caused:

either by overshooting of the first current threshold value, detected by the comparator 92,

or by the modulator 78 if the time interval between the positive pulse and the negative pulse which immediately follows it is greater than the maximum duration Tmax which is allowed.

FIG. 5 shows the high frequency signals under normal operating conditions,

line j: alternate positive and negative pulses received at the input 40 of the circuit (these are the regulation signals defining the times at the beginning and end of conduction of the power transistor Tp),

line k: shaped pulses at the output 72 of the separation and shaping circuit 74: they correspond to the positive pulses only of the regulation signals,

line l: saw tooth at the output 70 of oscillator 62; the saw tooth is synchronized with the regulation signals in that its zero return coincides with the pulses of line k,

line m: pulses at output 62 of oscillator 64; these pulses are emitted during zero returns of the saw tooth of line l,

line n: output square waves of modulator 78 further defining the maximum conduction time of the power transistor;

line o: pulses from the output 76 of the separation and shaping circuit 74: these pulses correspond to the negative pulses of the regulation signals,

line p: as a reminder, pulses have been shown at the output of comparator 92 in the case where the current in the power transistor exceeds the threshold corresponding to Vs1.

The conduction of transistor Tp, after being enabled by a pulse of line k, is normally stopped by the pulse from line o which immediately follows it, or, more exceptionally by the pulses from line p if the threshold Vs1 is exceeded before the apearance of the pulse of line o, or else, by the square waves of line n if the threshold is not exceeded and if the pulse of line o appears after the beginning of a square wave of line n.


FIG. 6 shows the very low frequency signals at the time of passing over from start-up conditions to normal operating conditions (same scale as FIG. 4).

line q: regulation signals at the input 40; these signals are initially absent and appear at a certain moment,

line r: output of the flip flop 89 indicating the absence then the presence of regulation signals,

line s: very low frequency saw tooth which rises to its high level and does not drop again if the output o the flip flop 89 is at the high level (indicating the presence of regulation signals)

line t: output of the OR gate 100 showing initially a square wave of short duration, delivered by comparator 88 and causing a start-up burst (cf. FIG. 4), then blocking at the high level which prevents subsequent inhibition of the AND gate 58 by the comparator 88.

(c) Safety mode in the case of a malfunction

The safety mode consists in fact in establishing start-up cycles as during switch on.

These cycles are triggered by start up of the very low frequency oscillator 82 when the regulation signals disappear at input 40.

Flip flop 89 returns to an intial state when it no longer receives pulses from the output 72 of the separation and shaping circuit 74. Thus, oscillator 82 will be able to oscillate again and the above described cycles are established.

(d) Serious incident: very high over current

Whatever the operating conditions, normal or start-up, over-currents in transistor Tp are detected by the comparator 92 and cause interruption of the conduction. But if there is for example a short circuit at the output of the power supply, an over-current may occur such that the current continues to increase before the conduction has time to be completely interrupted. In this case, it is provided for the threshold comparator 94 to deliver an order inhibiting the enabling when the current in transistor Tp exceeds a third threshold value which is for example greater by 30% than the first value. This inhibition order is stored by flip flop 96 which switches under the action of the comparator and disables the AND gate 58; flip flop 96 can only come back to its initial state when the integrated circuit, after having partially or totally ceased to be supplied with power, is again normally supplied. For example, the power supply must be switched off and switched on again to allow pulses to pass again for enabling the transistor Tp.


To finish this description, there has been shown in FIG. 7 one example of the circuit 90 which produces a variable threshold for the comparator 92: the very low frequency saw tooth deliveredy by the oscillator is applied to a voltage/current converter 102 which produces a saw tooth current increasing from 0 to a maximum value.

This current is applied to a series assembly of a voltage source 104 (value Vs2) and a resistor 106. A voltage clipper, represented by a Zener diode 108 (value of the conduction threshold: Vs1) is connected in parallel across the assembly 104, 106. The junction point between the output of the converter 102, resistor 106 and the voltage clipper 108 forms the output of circuit 90 and is connected to the input of comparator 92. Thus, when the saw tooth returns to zero, the output voltage of circuit 90 is Vs2. Then it increases as the current in the resistor 106 increases (linearly). When the voltage at the terminals of resistor 106 reaches and exceeds the value Vs1-Vs2, the voltage clipper conducts and diverts the current surplus so that the output voltage remains limited to Vs1.

 

 

 

  THOMSON  TEA2162 / TEA2164 / TEA2165  WORKING OF CONTROL CIRCUIT FOR A CHOPPED POWER SUPPLY WITH PROGRESSIVE START UP :

A chopped power supply control circuit is provided intended to receive regulation control signals and to produce square waves for enabling a switch. A current comparator measures the current in the switch and opens the switch when the threshold is exceeded. Under normal operating conditions the threshold is fixed. Under start-up conditions of should a malfunction occur a threshold variation circuit causes the threshold to vary gradually from a low value to its normal value. Thus the risk of over-current at start-up is reduced.

Inventors: De Sartre, Jean (Meylan, FR)  ;  Maige, Philippe (Syssinet Pariset, FR) Thomson-csf (Paris, FR)

 1. A chopped power supply control circuit intended to receive regulation control signals and to produce square waves for enabling a mains switch of the power supply, wherein said square waves having a variable width depending on the signals received, said circuit comprising:

a current limiting circuit including a threshold comparator receiving at one input a signal and at another input a threshold signal;

a means for said comparator to generate a signal for disabling the switch when the threshold is exceeded, in order to ensure gradual start-up of the chopped power supply at the beginning of its operation and in the case of a disturbance of operation;

a means for establishing a variable threshold signals in response to circuit means which

establish a first fixed threshold value under normal established operating conditions,

establish periodically a threshold variation cycle in the opposite case, this cycle comprising

means to cause the threshold to pass to a second value at a time representing the beginning of a periodic threshold variation cycle, the second threshold value corresponding to a lower current in the switch,

means to bring the threshold gradually back from the second value to the first in a first part of the threshold variation cycle,

means for maintaining the threshold at the first value until the end of the current cycle,

means to begin a second start-up cycle again at the end of the current cycle if regulation control signals are still not received at the end of the first cycle,

means for stopping the establishment of threshold variation cycles when regulation control signals are received.


2. The control circuit as claimed in claim 1 wherein the first part of each periodic cycle corresponds to a short time compared with the period of the cycle and a long time compared with the switching period of the chopped power supply.

3. The control circuit as claimed in claim 1, wherein a very low frequency oscillator is provided for defining the periodic two phase threshold variation cycles, said oscillator being inhibited by the reception of appropriate regulation control signals.

4. The control circuit as claimed in claim 3, wherein said very low frequency oscillator is a relaxation oscillator delivering a saw tooth signal driving the threshold establishment means for establishing:

a sudden variation of the threshold at the time of the zero return of the saw tooth,

a slow linear increase of the threshold at the beginning of the saw tooth.


5. The control circuit as claimed in claim 4, wherein a high frequency oscillator is provided producing chopping signals palliating the absence of regulation signals for the production of square waves enabling the switch and an inhibition means for allowing transmission of these signals only during the first phase of each periodic cycle.

6. The control circuit as claimed in claim 5, wherein said high frequency oscillator has a free oscillation period slightly greater than the period of the regulation control signals and it is synchronized by these signals when they are received.

7. The control circuit as claimed in claim 1, wherein a second threshold comparator is provided for receiving a signal representative of the current in the switch and delivering a signal completely inhibiting enabling of the switch in the case where the current in the switch exceeds a third threshold value greater than the first value, the signal only ceasing when the circuit, after having partially or totally ceased to be supplied with power, is again normally supplied.

Description:

BACKGROUND OF THE INVENTION

The present invention relates to stabilized power supplies called chopped supplies.

A chopped power supply operates in the following way: a primary transfer winding receives a current which is for example delivered by a rectifier bridge receiving the power of the AC mains. The current in the transformer is chopped by a switch (for example a power transistor) placed in series with the primary winding.

A circuit for controlling the transistor produces periodic square waves for enabling the transistor. A current is allowed to pass for the duration of the square waves; outside the square wave, the current cannot pass.

On one (or more) secondary windings of the transformer, an AC voltage is collected. This is rectified and filtered so as to obtain a DC voltage which is the output DC voltage of the chopped power supply.

For stabilizing the value of this DC voltage, the cyclic period conduction ratio of the switch is adjusted, that is to say the ratio between the duration of conduction and the duration of non conduction in a chopping period.

In chopped power supply architecture proposed by the applicant and shown in FIG. 1, two integrated circuits are used. One of the circuits CI1, serves for controlling the base of a power transistor Tp for applying thereto periodic enabling and disabling control signals. The base control circuit CI1 is placed on the primary winding side (EP) of the transformer (TA) for reasons which will be better understood in the rest of the description. The other integrated circuit, regulation circuit CI2, is on the contrary placed on the secondary side (winding ES1) and it serves for examining the output voltage Vs of the power supply for forming regulation signals which it transmits to the first integrated circuit through a small transformer TX. The first integrated circuit CI1 uses these regulation signals for modifying the cyclic conduction ratio of the switching transistor Tp and thus regulating the output voltage Vs of the power supply.


We will come back further on in more detail to the circuit of FIG. 1.

Numerous problems arise during the design of a chopped power supply, and here we will consider more particularly the problems of starting up the supply and the problems of safety in the case of over voltages or over currents at different points in the circuit.

The first problem which is met with is that of starting up the power supply: at switch on, the regulation circuit CI2 will tend to cause the base control circuit CI1 to generate maximum cyclic ratio square waves until the power supply has reached its nominal output voltage. This is all the more harmful since there is a high current drain on the side of the secondary windings which are connected to initially discharged filtering capacitors. There is a risk of destruction of the power transistor through an overcurrent during the start up phase.

Circuits for gradual start up have already been proposed which limit the duration of the enabling square waves during a start up phase, on switching on the device; the U.S. Pat. No. 3,959,714 describes such a circuit in which charging of a capacitor from switch-on defines initially short square waves of gradually increasing duration until these square waves reach the duration which the regulation circuit normally assigns to them. The short square waves have priority; but, since they become gradually longer during the start up phase, they cease to have priority after a certain time; this time is defined by the charging time constant of the capacitor.

Another problem to be reckoned with is the risk of accidental over-currents, or sometimes over-voltages which may occur in the circuit. These overcurrents and over-voltages may be very detrimental and often result in the destruction of a power transistor if nothing is done to eliminate them. In particular, a short circuit at the output of the stabilized power supply rapidly destroys the power transistor. If this short circuit occurs on switching-on of the supply, it is not the gradual start up system with short and progressively increasing square waves which can efficiently accomodate the over-currents which result from this short circuit.

Finally, another problem particularly important in an architecture such as the one shown in FIG. 1, is the risk of disappearance of the regulation signal which should be emitted by the regulation circuit CI2 and received by the base control circuit CI1: these signals determine not only the width of the square waves enabling the power transistor but also their periodicity; in other words, they serve for establishing the chopping frequency, possibly synchronized from a signal produced on the secondary side of the transformer. The appearance of these signals causes a particular disturbance which must be taken into account.

Furthermore, the architecture shown in FIG. 1, in which the secondary circuits have been voluntarily separated galvanically from the primary circuits, is such that the base control circuit may operate rapidly after switch-on, as will be explained further on, whereas the regulation circuit CI2 can only operate if the chopped power supply is operating; consequently, at the beginning, the base control circuit CI1 does not receive any regulation signals and this difficulty must be taken into account.

SUMMARY OF THE INVENTION

To try and overcome as well as possible all these different problems which relate to security against accidental disturbances in the operation of the power supply (the initial start up being more-over considered as a transitory disturbed operating phase), the present invention provides an improved chopped power supply control circuit which provides a function of gradual start-up power supply on switch on and a function of passing to a safety mode in the case of an operating defect such as a disappearance of appropriate regulation signals; the safety mode consists of a succession of periodic cycles at a very low frequency, each cycle consisting of a gradual start-up attempt during a first phase which is short in comparison with the period of the cycle and long compared with the chopping period of the chopped power supply, the first phase being followed by a pause until the end of the cycle, and periodic cycles succeeding each other until normal operation of the power supply is established or re-established; a very low frequency oscillator establishes these cycles when the power supply is not operating under normal conditions (start-up or operating defect); this oscillator is disabled should normal operation be ascertained; a high frequency oscillator generates a burst of chopping signals palliating the absence of regulation signals; these signals are transmitted solely during the first phase of each cycle; they are inhibited during a second phase.

According to a very important characteristic of the invention, the gradual start up operates not by limiting the duration of the square waves from the charging of a capacitor with a fixed time constant, but by limiting the current in the power transistor to a maximum value, this maximum value increasing progressively during the start up phase, over-shooting of this current value causing interruption in the conduction of the power transistor.

Thus, even in the case of a quasi short circuit, the value of the current in the transistor is limited, which was not the case in the gradual start up circuits of the prior art.

More precisely, the chopped power supply control circuit of the invention is intended to receive regulation control signals and to produce square waves for enabling a main switch of the power supply, the square waves having a variable width depending on the signals received, and this circuit comprises a current limiting circuit including a threshold comparator receiving at one input a signal representative of the current flowing through the switch and at another input a threshold signal, the comparator generating a signal for stopping the switch from conducting should over shooting of the threshold occur; furthermore, in order to ensure gradual start-up of the chopped power supply at the beginning of its operation and should this operation be disturbed, the control circuit comprises a means for producing a variable threshold signal for the comparator, this means being adapted for:

establishing a first fixed threshold value under normal operating conditions,

establishing a periodic threshold variation cycle outside normal operating conditions, this cycle consisting in:

causing the threshold to pass suddenly from the first value to a second value, at a time representing the beginning of the cycle, the second value corresponding to a lower current in the switch,

bringing the threshold gradually back from the second value to the first in a first part of the threshold variation cycle,

holding the threshold at the first value until the end of the current cycle,

beginning again a second threshold variation cycle at the end of the current cycle,

stopping the production of threshold variation cycles when normal operating conditions have again been established.

Normal operating conditions will in general be defined by the presence of appropriate regulation signals and by the absence of an over-current in the switch.

The periodic cycle is at very low frequency (for example 1 hz), and the duration of a first part of the cycle is preferably small with respect to the period of the cycle (for example a tenth of this period, followed by a pause during the nine remaining tenths); it is long with respect to the chopping period of the power supply.

In order to provide even more complete safety, a second threshold comparator is preferably provided receiving at one input a signal respresentative of the measurement of the current in the switch and at another input a third threshold value corresponding to a current greater than that of the first threshold value, the comparator delivering a signal for complete inhibition of the switching of the power switch should over-shooting of this third value occur, the inhibition only ceasing when the circuit, after having partially or completely ceased to be supplied with power, is again normally supplied.

BRIEF DESCRIPTION OF THE DRAWINGS

Other features and advantages of the invention will be clear from reading the following detailed description made with reference to the accompanying drawings in which:

FIG. 1 shows a general chopped power supply diagram using two integrated circuits placed respectively on the primary side and on the secondary side of a transformer,

FIG. 2 shows a diagram of the integrated control circuit of the power transistor placed on the primary side,

FIGS. 3 to 6 show timing diagrams of signals at different points on the circuit, and

FIG. 7 shows a detail of a circuit for elaborating a variable threshold.

DESCRIPTION OF THE PREFERRED EMBODIMENT

Referring to FIG. 1 which shows a chopped power supply architecture given by way of example and well illustrating the utility of the invention, the electric mains line has been designated by the reference 10 (mains at 110 to 220 volts, 50 or 60 hertz). This line is connected through a filter 12 to the input of a rectifier bridge 40 whose output is connected on the one hand to a primary electric ground, represented everywhere by a downward pointing black triangle, and on the other hand to one end of the primary winding EP of the power supply transformer TA.

A filtering capacitor 16 is placed in parallel across the outputs of the rectifier bridge 14. The other end of the primary winding is connected to the collector of a switching transistor TP whose emitter is connected to the primary ground through a small current measuring resistor 18.

The transformer has several secondary windings which are preferably isolated galvanically from the mains and connected for example to a secondary electric ground isolated galvanically from the primary ground.

Here, each of the secondary windings has one end connected to the secondary ground. The other end feeds a respective low-pass filtering capacitor through a respective rectifier diode.

We will be concerned in what follows with a single secondary winding ES1, connected by a diode 20 to a capacitor 22. The DC output voltage of the chopped power supply is the voltage Vs at the terminals of the capacitor 22; but of course, other DC output voltages may be obtained at the terminals of the other filtering capacitors connected to the secondary windings. These output voltages form stabilized power supply voltages for user circuits not shown. By way of example, a secondary winding ES2 supplies a stabilized power supply voltage of a few volts for the integrated regulation circuit CI2 already mentioned. It can therefore be seen in this connection that this circuit is not supplied with power and cannot therefore supply signals as long as the chopped power supply is not operating.

The same goes a priori for the integrated circuit CI1 controlling the base of the power transistor TP, which circuit is supplied with a stabilized voltage delivered by a secondary winding ES3, a diode 24 and a capacitor 26 (it will be noted in passing that this winding, although being a secondary winding, is connected to the primary ground and not to the secondary ground, for the very simple reason that the integrated circuit CI1 is necessarily coupled galvanically to the primary).

However, since start up of the chopped power supply must be provided, the power supply terminal 28 of the integrated circuit CI1 is also connected directly to the mains through a high resistor 30 and a diode 32; this is possible since the integrated circuit CI1 is connected to the primary ground; it is not possible for the integrated circuit CI2 which must remain galvanically isolated from the mains. As soon as the chopped power supply is operating normally, the stabilized DC voltage from winding ES3 and diode 24 takes precedence over the voltage coming from the mains and from diode 32; this diode 32 is disabled and the direct supply by the mains only takes place after the initial start up phase.

The role of the integrated circuits CI1 and CI2 will now be described.

The regulation circuit CI2 receives from a divider bridge 34, placed at the terminals of capacitor 22, i.e. at the output of the stabilized power supply, information concerning the value of the voltage to be stabilized Vs.

This information is compared with a reference value and applied to a pulse width modulator which forms periodic square waves of variable width depending on the value of the output voltage Vs: the lower Vs the wider the square waves will be.

The square waves are established at the chopping frequency of the chopped power supply. This frequency is therefore established on the secondary side of the circuit; it is generated either inside the circuit CI2, or outside in a circuit not shown, in the form of a saw tooth voltage at the chosen chopping frequency. This saw tooth voltage is used in a way known per se for providing width modulation.

The variable width square waves, at the chopping frequency, are applied to a primary winding 36 of a small transformer TX whose secondary winding 38, isolated galvanically from the primary, delivers positive and negative pulses at the rising and falling fronts respectively of the variable width square waves.

It is these pulses, whose position and frequency are determined by the regulation circuits CI2, which form regulation signals applied to an input 40 of the base control circuit CI1.

The transformer TX is formed by a few turns wound on a ferrite rod, the turns of the primary and the turns of the secondary being sufficiently spaced apart from each other for complying with standards of galvanic isolation between primary circuits and secondary circuits of the chopped power supply.

The integrated base control circuit CI1 comprises different inputs among which have already been mentioned a power supply input 28 and a regulation signal input 40; a current measuring input 44 is connected to the current measuring resistor 18; an inhibition input for monitoring the magnetization condition of a transformer. Finally, inputs may be provided for connecting elements (resistors, capacities) which should form part of the integrated circuit itself but which for technological reasons (space limitation) or for practical reasons (possibilities of adjustment by the user) are mounted outside.

The integrated circuit CI1 finally comprises an output 46 which is intended to be connected by direct galvanic coupling to the base of the power transistor Tp. This output delivers square waves for enabling and disabling the transistor Tp.

FIG. 2 shows the general architecture of the integrated circuit CI1, limited to the elements which more especially concern the invention.

The output 46 of the circuit is the output of a push-pull amplification stage designated as a whole by the reference 48, this stage comprising preferably two separate amplifiers one of which receives enabling square waves and the other receives disabling signals formed by the inverted enabling signals delayed by a few microseconds. Such amplifiers are now well known.

The enabling signals are provided by a logic flip flop 50 having a set input 52 and a reset input 54. The set input causes enabling of the power transistor. The reset input causes disabling.

The set input 52 receives the pulses which pass through a logic AND gate 58, so that conduction only occurs if several conditions are satisfied simultaneously; one unsatisfied condition, will be sufficient to inhibit enabling of the conduction.

The reset input 54 receives the pulses which pass through a logic OR gate 60, so that stopping of the conduction (after enabling) will occur as soon as a stop signal is present at one of the inputs of this gate.


In the diagram of FIG. 2, the AND gate 58 has three inputs. One of these inputs receives periodic pulses from an output 62 of a high frequency oscillator 64; the other inputs serve for inhibiting the transmission of these pulses.

The oscillator defines the periodicity of the chopping of the power supply (20 kilohertz for example). Under normal operating conditions, the oscillator is synchronized by the regulation signals; under start-up conditions it is self-oscillating at a free frequency defined by the values of a resistor Ro and a capacitor Co external to the integrated circuit CI1 and connected respectively to an access terminal 66 and an access terminal 68. The free frequency fo is generally slightly lower than the normal chopping frequency.

Oscillator 64 is a relaxation oscillator which produces at an output 70 a saw tooth whose return to zero is caused by the appearance of a positive pulse at terminal 40. This is why oscillator 64 is shown with one input connected to an output 72 of a shaping and separation circuit 74 which receives the regulation signals from terminal 40 and shapes them while separating the positive pulses from the negative pulses. The shaping circuit. 74 has two outputs: 72 for the positive pulses, 76 for the negative pulses (the notation positive pulse and negative pulse will be kept for distinguishing the pulses causing conduction and the pulses stopping conduction even if the shaping circuit establishes pulses of the same sign at both its outputs 72 and 76).

The oscillator 64 has two outputs: one output 70 delivering a saw tooth and one output 62 delivering a short pulse during the zero return of the saw tooth.

A pulse width modulator 78 is connected on the one hand to the output 70 of the oscillator and on the other to a reference voltage adjustable by means of a resistor R1 external to the integrated circuit and connected to a terminal 80 giving access to the circuit. Modulator 78 supplies periodic square waves synchronized with the signals of the oscillator, these square waves defining a maximum conduction time Tmax beyond which the power transistor must be disabled in any case for safety's sake. These square waves of modulator 78 are applied to one input of the OR gate 60. The time Tmax is adjustable by means of the external resistor R1.

The elements which have just been described ensure the essential part of the operation under normal conditions of the integrated circuit CI1. The following elements are more specifically provided for controlling the abnormal operation or start-up of the power supply.

A very low frequency oscillator 82 is connected to an external capacitor C2 through an access terminal 86. This external capacitor allows the very low oscillation frequency to be adjusted. The frequency may be 1 hertz for example.

Oscillator 82 is a relaxation oscillator delivering a saw tooth. This saw tooth is applied on the one hand to a threshold comparator 88 which allows periodic square waves to be established synchronized with the very low frequency saw tooth of the oscillator. These square waves have a very short duration compared with the period of the saw tooth; this duration is set by the threshold of the comparator 88; it may for example be 10% of the period; it must be long compared with the free oscillation period of the high frequency oscillator 64 so that a burst of numerous pulses from the high frequency oscillator may be emitted and used during this 10% of this very low frequency period; this burst defines a start-up attempt during the first part of a start-up cycle; it is followed by a pause for the rest of the period, i.e. during the remaining 90%.

The oscillator only serves at start-up; it is inhibited when regulation signals appear at terminal 40 and indicate that the chopped power supply is operating. This is why an inhibition control of this oscillator has been shown connected to the output 72 of the shaping circuit 74 through a flip flop 89. This flip flop changes state under the action of the pulses appearing at output 72. It is brought back to its initial state by the output 62 of oscillator 64 when there are no longer any pulses at output 72.

The saw teeth of the very low frequency oscillator are further fed to a variable threshold elaboration circuit 90 whose purpose is to establish a threshold signal (current or voltage) having a first value Vsl under normal operating conditions, and a cyclically variable threshold between the first value and a second value under start-up conditions. The mode of variation of this threshold will be described further on, but it may already be noted that the variation is driven by the very low frequency saw tooth.

The threshold signal produced by circuit 90 is applied to one input of a comparator 92, another input of which is connected to the terminal 44 already mentioned, for receiving at this input a signal representative of the amplitude of the current flowing through the power switch. The output of comparator 92 is applied to an input of the OR gate 60. It operates then for causing the power transistor Tp to be disabled, after being enabled, disablement occurring as soon as overshooting of the threshold (fixed or variable) defined by circuit 9 has been detected.

Another threshold comparator 94 has one input connected to the current measuring terminal 44 whereas another input receives a signal representing a third threshold value Vs3. The third value Vs3 corresponds to a current in the switch higher than the first value Vsl defined by circuit 90. The output of comparator 94 is connected through a storage flip flop 96 to one input of the AND gate 58 so that, if the current in the power switch exceeds the third threshold value Vs3, transistor Tp is not disabled (such disablement is caused by comparator 92) but the transistor is inhibited from being enabled again. This inhibition lasts until the flip flop 96 is brought back to its initial state corresponding to normal operation.

In theory, such re-setting will only take place when the integrated circuit CI1 has ceased to be normally supplied with power and has again power applied thereto.

For example, re-setting of flip flop 96 takes place through a hysteresis threshold comparator 98 which compares a fraction of the supply voltage Vcc of the circuit (taken from terminal 28) with a reference value and which re-sets the flip flop the first time that Vcc passes above this reference after a drop of Vcc below another reference value lower than the first one (hysteresis). Finally, it should be mentioned that the output of the flip flop 89 (which detects the presence of regulation signals at terminal 40 so normal operation of the power supply), is connected to one input of an OR gate 100 which receives at another input the output of the comparator 88 so that the output of comparator 88 ceases to inhibit the re-enabling of transistor Tp (inhibition during 90% of the very low frequency cycles) as soon as the operation of the power supply has become normal.

OPERATION OF THE BASE CONTROL CIRCUIT

This operation will be described by illustrating it with voltage wave forms within the chopped power supply and within the integrated circuit CI1.

(a) Start-up on switching on

At the beginning the integrated circuit is not at all supplied with power.

The voltage at the power supply terminal 28 increases from 0 to a value Vaa which is not the nominal value Vcc but which is a lower value supplied by diode 32 and resistor 30 (compare FIG. 1) as long as the chopped power supply does not deliver its nominal output voltage Vcc at terminal 28. Vaa is a sufficient voltage for ensuring practically normal operation of all the elements of the circuit CI1. Vaa is also sufficient for reinitializing the flip flop 96 which, from then on, no longer inhibits the enabling of the power transistor Tp.

There are no regulation signals at the input 40. Consequently, the high frequency oscillator oscillates at its free frequency and the very low frequency oscillator also oscillates (it is not inhibited by the flip flop 89 since this latter does not receive any regulation signals from the output 72 of the shaping circuit 74).

The very low frequency oscillator 82 and the comparator 88 define periodic cycles of start-up attempts repeated at very low frequency.

Each cycle comprises a first part defined by the square waves of short duration at the output of the comparator 88, and a second part formed by the end of the very low frequency period; the first part is an effective attempt at start-up. The second part is a pause if the effective attempt has failed. The pause lasts much longer than the effective attempt so as to limit power consumption. During the first part of the cycle, passage of the enabling signals from the high frequency oscillator 64 is allowed through the AND gate 48. Then it is prohibited. Each pulse from the output 62 of the oscillator 64 triggers off the enabling of transistor Tp. There is then a burst of triggering pulses which is emitted for about 10% of the verylow frequency period.

During start up, the current intensities in the transistor tend to be high. It is essentially the comparator 92 which causes interruption of the conduction, after each enabling pulse supplied by oscillator 64, as soon as the current exceeds the threshold imposed by the variable threshold elaboration circuit 90. If the comparator 92 does not trigger off interruption of the conduction, the modulator 78 will do it in any case at the end of the duration Tmax.

The threshold elaboration circuit which supplies the comparator 90 with a first fixed threshold value Vs1 under normal operating conditions (i.e. when the very low frequency oscillator 82 is disabled by the flip flop 89), delivers a variable threshold as a function of the saw tooth of the very low frequency oscillator in the following way:

at the initial time of a start-up attempt cycle (start of the saw tooth or return to zero of the preceding saw tooth), the threshold passes suddenly from the first value Vs1 to a second value Vs2 corresponding to a smaller current than for the first value, then this threshold increases progressively (because driven by the very low frequency saw tooth) from the second value to the first one. The duration of the increase coincides preferably with the duration of a start-up attempt square wave (namely about 10% of the very low frequency period).

Then the threshold stabilizes at the first value Vs1 until the end of the period but, in any case, if the circuit has not started up at that time, the comparator 88 closes gate 58 through the OR gate 100 and inhibits any subsequent enabling of the power transistor for the rest of the very low frequency period (90%). It is in this case the second part of the start up attempt cycle which takes place: a pause during which the pulses of the oscillator 64 are not transmitted through the AND gate 58.

Thus the start up cycles act on two levels: on the one hand a burst of enabling pulses is emitted (10% of the time) then stopped (90% of the time) until the next cycle; on the other hand, during this burst, the current limitation threshold passes progressively from its second relatively low value to its normal higher value.

Consequently, if we observe the peak amplitude of the current in transistor Tp during the start-up bursts, it can be seen that it increases practically linearly from the second value to the first value. Therefore gradual start-up is obtained by a much more efficient action than that which consists simply for example in causing the time Tmax to increase from a low value to a nominal value. If start up is not successful, a new burst of enabling pulses is transmitted during the first part of the next cycle (it will be recalled that this cycle is repeated about once per second and that the burst may last 100 milliseconds).

If start-up is successful, regulation signals appear at terminal 40. These signals are shaped by circuit 74. They cause the very low frequency oscillator 82 to stop through the flip flop 89 which prevents the zero return of the saw tooth. Moreover, flip flop 89 sends through the OR gate 100 a signal for cancelling out the inhibition effect imposed by the comparator 88. Finally, as soon as start-up is successful, the regulation signals synchronize the high frequency oscillator 64.

FIG. 3 illustrates the high frequency signals during the start-up period:



line a: saw tooth at the output 70 of the oscillator 64 (free oscillation at frequency fo, period To),

line b: pulses for enabling the transistor Tp : these pulses coincide with the zero return of the saw tooth signal (output 62 of oscillator 64),

line c: output square waves from modulator 78 defining the maximum cyclic conduction time of the transistor,

line d: pulses delivered by the comparator 92 when the current in the switch exceeds the threshold (gradually increasing during start-up) defined by circuit 90.

Conduction of transistor Tp, after being triggered by a pulse from line b, is stopped either by square waves of line c if the current threshold is not exceeded, or by an output pulse from comparator 92.

FIG. 4 shows the very low frequency signals during the start up cycles. The diagrams are not to the same time scale as in FIG. 3 since it will be recalled that an example of the frequency of the high frequency oscillator 64 is 20 kilohertz whereas an example of the very low frequency of oscillator 82 is 1 hertz. The high frequency pulses have however been shown symbolically in FIG. 4, in a more limited number than in reality for facilitating the representation.

line e: saw tooth output of the very low frequency oscillator (frequency f2, period T2),

line f: output of the comparator 88 representing the first phase (start-up attempt by causing transistor Tp to be enabled) and the second phase (pause through inhibiting such enabling) during each very low frequency start-up cycle,

line g: pulses from the freely oscillating high frequency oscillator,

line h: bursts of enabling pulses at the output of the AND gate 58,

line i: diagram of the cyclic variation of the threshold elaborated by circuit 90 during the start up cycles: fixed value Vs1 in theory, sudden drop to Vs2 at the beginning of the very low frequency saw tooth, and gradual rise of Vs2 to Vs1, driven by the linear growth of the saw tooth, during the start-up burst.

(b) Operation of the power supply under normal established operating conditions

The very low frequency oscillator is not operating.

The high frequency oscillator is synchronized by the regulation signals.

The zero return of the high frequency saw tooth, coinciding with the positive pulse of the regulation signals, causes transistor Tp to be enabled (no inhibition by the AND gate under normal operating conditions). The negative pulses cause disablement, through the OR gate 64, unless such disablement has been caused:

either by an overshoot of the first current threshold value, detected by comparator 92,

or by the modulator 78 if the time interval between the positive pulse and the negative pulse which immediately follows it is greater than the maximum duration Tmax which is permitted.

FIG. 5 shows the high frequency signals under normal operating conditions.



line j: alternate positive and negative pulses received at the input 40 of the circuit (these are the regulation signals defining the times at which the power transistor Tp is enabled and disabled),

line k: shaped pulses at the output 72 of the separation and shaping circuit 74: they correspond to the positive pulses only of the regulation signals,

line l: saw tooth at the output 70 of oscillator 64; the saw tooth is synchronized with the regulation signals n so that its zero return coincides with the pulses of line k,

line m: pulses at the output 62 of oscillator 64; these pulses are emitted during zero returns of the saw tooth of line 1,

line n: output square waves of modulator 78, again defining the maximum duration of conduction of the power transistor,

line o: pulses coming from the output 70 of the separation and shaping circuit 74: these pulses correspond to the negative pulses of the regulation signals,

line p: as a reminder, pulses have been shown at the output of comparator 92 in the case where the current in the power transistor overshoots the threshold corresponding to Vs1.

Transistor Tp after being enabled by a pulse from line k is normally disabled by the pulse from line o which immediately follows it, or, more exceptionally by the pulses from line p if the threshold Vs1 has been exceeded before the appearance of the pulse from line o, or else, by the square waves of line n if the threshold has not been exceeded and if the pulse from line o appears after the beginning of a square wave of line n.

FIG. 6 shows the very low frequency signals at the time of going over from start-up conditions to normal operating conditions (same scale as in FIG. 4).

line q: regulation signals at the input 40; these signals are initially absent and appear at a certain moment,

line r: output of the flip flop 89 indicating the absence or the presence of regulation signals,

line s: very low frequency saw tooth which rises to its high level and does not drop again if the output of the flip flop 89 is at the high level (indicating the presence of regulation signals),

line t: output of the OR gate 100 showing initially a square wave of short duration, coming from comparator 88 and allowing a start-up burst (cf. FIG. 4), then blocking at the high level which prevents subsequent inhibition of the AND gate 58 by the comparator 88.

(c) Safety mode in the case of a malfunction

The safety mode consists in fact in establishing start-up cycles as for switching on.

These cycles are triggered off by starting up the very low frequency oscillator 82 when the regulation signals disappear at input 40.

The flip flop 89 goes back to an initial state when it no longer receives pulses from the output 72 of the separation and shaping circuits 74. Thus oscillator 82 will be able to oscillate again and the above described cycles are established.

(d) Serious malfunction: very high over current.

Whatever the operating conditions, normal or start-up, the over-currents in the transistor Tp are detected by the comparator 92 and cause interruption of the conduction.

But if there is for example a short circuit at the output of the power supply, an over-current may occur such that the current continues to increase before the conduction can be completely interrupted. In this case, it is provided for the threshold comparator 94 to supply an enabling inhibition order when the current in transistor Tp exceeds a third threshold value which is for example higher by 30% than the first value. This inhibition order is stored by the flip flop 96 which switches under the action of the comparator and disables the AND gate 58; the flip flop 96 can only come back to its initial state when the integrated circuit, after having partially or totally ceased to be supplied with power, is again normally supplied with power. For example, the power supply must be switched off and switched on again to again allow the passage of pulses for enabling the transistor Tp.


To finish this description, there has been shown in FIG. 7 an example of circuit 90 which elaborates a variable threshold for the comparator 92: the very low frequency saw tooth delivered by the oscillator is applied to a voltage/current converter 102 which produces a current increasing in saw tooth fashion from zero to a maximum value.

This current is applied to a series assembly of a voltage source 104 (value Vs2) and a resistor 106. A voltage clipper, shown by a Zener diode 108 (value of the conduction threshold: Vs1) is placed in parallel across the assembly 104, 106. The junction point between the output of the converter 102, the resistor 106 and the voltage clipper 108 forms the output of circuit 90 and is connected to the input of comparator 92. Thus, at zero return of the saw tooth, the output voltage of circuit 90 is Vs2. Then it increases as the current in resistor 106 increases (linearly). When the voltage at the terminals of resistor 106 reaches and exceeds the value Vs1-Vs2, the voltage clipper conducts and diverts the current surplus so that the output voltage remains limited to Vs1.

 

 


 

SCHNEIDER  STV707  DTV-2-7025-11 (49474A) Switch-mode power supply with burst mode standby operation:

In a switch mode power supply, a first switching transistor is coupled to a primary winding of a transformer for generating pulses of a switching current. A secondary winding of the transformer is coupled via a switching diode to a capacitor of a control circuit for developing a control signal in the capacitor. The control signal is applied to a mains coupled chopper second transistor for generating and regulating supply voltages in accordance with pulse width modulation of the control signal. During standby operation, the first and second transistors operate in a burst mode that is repetitive at a frequency of the AC mains supply voltage such as 50 Hz. In the burst mode operation, during intervals in which pulses of the switching current occur, the pulse width and peak amplitude of the switching current pulses progressively increase in accordance with the waveform of the mains supply voltage to provide a soft start operation in the standby mode of operation within each burst group.

Description:

The invention relates to switch-mode power supplies.

In a typical switch mode power supply (SMPS) of a television receiver the AC mains supply voltage is coupled to a bridge rectifier. An unregulated direct current (DC) input supply voltage is produced. A pulse width modulator controls the duty cycle of a chopper transistor switch that applies the unregulated supply voltage across a primary winding of a flyback transformer. A flyback voltage at a frequency that is determined by the modulator is developed at a secondary winding of the transformer and is rectified to produce DC output supply voltages such as a voltage B+ that energizes a horizontal deflection circuit of the television receiver and a voltage that energizes a remote control unit.

During normal operation, the DC output supply voltages are regulated by the pulse width modulator in a negative feedback manner. During standby operation, the SMPS is required to generate the DC output supply voltage that energizes the remote control unit. However, most other stages of the television receiver are inoperative and do not draw supply currents. Consequently, the average value of the duty cycle of the chopper transistor may have to be substantially lower during standby than during normal operation.

Because of, for example, storage time limitation in the chopper transistor, it may not be possible to reduce the length of the conduction interval in a given cycle below a minimum level. Thus, in order to maintain the average value of the duty cycle low, it may be desirable to operate the chopper transistor in an intermittent or burst mode, during standby. During standby, a long dead time interval occurs between consecutively occurring burst mode operation intervals. Only during the burst mode operation interval switching operation occurs in the chopper transistor. The result is that each of the conduction intervals is of a sufficient length.

In accordance with an aspect of the invention, burst mode operation intervals are initiated and occur at a rate that is determined by a repetitive signal at the frequency of the AC mains supply voltage. For example, when the mains supply voltage is at 50 Hz, each burst mode operation interval, when switching cycles occur, may last 5 milliseconds and the dead time interval when no switching cycles occur, may last during the remainder portion or 15 milliseconds. Such arrangement that is triggered by a signal at the frequency of the mains supply voltage simplifies the design of the SMPS.

The burst mode operation intervals that occur in standby operation are synchronized to the 50 Hz signal. During each such interval, pulses of current are produced in transformers and inductances of the SMPS. The pulses of current occur in clusters that are repetitive at 50 Hz. The pulses of current occur at a frequency that is equal to the switching frequency of the chopper transistor within each burst mode operation interval. Such qurrent pulses might produce an objectionable sound during power-off or standby operation. The objectionable sound might be produced due to possible parasitic mechanical vibrations as a result of the pulse currents in, for example, the inductances and transformers of the SMPS.

In accordance with another aspect of the invention, the change in the AC mains supply voltage during each period causes the length of the conduction interval in consecutively occurring switching cycle during the burst mode operation interval to increase progressively. Such operation that occurs during each burst mode operation interval may be referred to as soft start operation. The soft start operation causes, for example, gradual charging of capacitors in the SMPS. Consequently, the parasitic mechanical vibrations are substantially reduced. Also, the frequency of the switching cycles within each burst mode operation interval is maintained above the audible range for further reducing the level of such audible noise during standby operation.

A switch mode power supply, embodying an aspect of the invention, for generating an output supply voltage during both a standby-mode of operation and during a run-mode of operation includes a source of AC mains input supply voltage. A control signal at a given frequency is generated. A switching arrangement energized by the input supply voltage and responsive to the first control signal produces a switching current during both the standby-mode of operation and the run-mode operation. The output supply voltage is generated from the switching current. An arrangement coupled to the switching arrangement and responsive to a standby-mode/run-mode control signal and to a signal at a frequency that is determined by a frequency of the AC mains input supply voltage controls the switching arrangement in a burst mode manner during the standby-mode of operation. During a burst interval, a plurality of switching cycles are performed and during an alternating dead time interval no switching cycles are performed. The two intervals alternate at a frequency that is determined by the frequency of the AC mains input supply voltage.
  TEA2164/TEA2165 EXTENDED OVERLOAD PROTECTION CIRCUIT FOR A SWITCH MODE POWER SUPPLY HAVING CYCLE DETECTOR, MEMORY AND FLIP-FLOP INHIBITION:
 
 A protection device for switch mode power supplies includes a main switch controlled by the output signals of a flip-flop. The flip-flop input receives regulation control signals. A first protection circuit supplies priority signals with respect to the regulation signals on the reset input of the flip-flop. The protection device also includes a cycle detector of the first protection circuit, a memory for accumulating at each cycle a value proportional to the duration between a signal of the detector and the set signal associated with the regulation cycle of the following cycle, and inhibiting of the flip-flop when the memory has accumulated a signal higher than a predetermined threshold.
 
 
Inventors:Maige, Philippe (Syssinet Pariset, FR) Thomson-csf (Paris, FR) 
 
 
 1. A device for protection against long duration overloading in switch mode power supplies comprising a main switch controlled by output signals from a first flip-flop, the set and reset inputs of which receive regulation control signals, a first protection circuit supplying on the reset input priority signals with respect to the regulation signals when the current in the main switch exceeds a predetermined threshold, further comprising a second protection circuit itself comprising:

means for detecting cycles for which the first protection circuit is active and interrupts the on state of the main switch prior to the arrival of the order for the off state of the regulation signal;

memorization means accumulating at each cycle a value proportional to the duration between a signal from the detection means and the set signal associated with the regulation signal of the following cycle; and

inhibition means for inhibiting the set input of the flip-flop when the memorization means has accumulated a signal higher than a predetermined threshold;

wherein the means for detecting includes a second flip-flop, a third flip-flop and an AND gate, the second flip-flop receiving at its reset input the starting output of the regulation signal, the set input of the second flip-flop receiving the output of the AND gate and the output of the second flip-flop controlling the memorization means; the third flip-flop having its set input connected to the reset input of the second flip-flop, the reset input of the third flip-flop connected to the reset regulation signal and the output of the third flip-flop connected to a first input of the AND gate; the second input of the AND gate being connected to the output of the first protection circuit.


2. A device for protection according to claim 1, wherein the memorization means comprise a capacitor permanently discharged by a discharging means and temporarily charged by a charging means only when the detection means supplies a signal.

3. A device for protection according to claim 2, wherein the charge and discharge means are current supplies and the charge current supply is connected to the capacitor through a controlled switch actuated by the output of the second flip-flop of the detection means.

4. A device for protection according to claim 1, wherein the inhibition means comprise a comparator comparing the signal accumulated by the memorization means with a reference value, the output signal of this comparator inhibiting the set input of the first flip-flop when the memorized signal becomes higher than a reference value.

5. A device for protection according to claim 4, wherein the output of said comparator is connected to the set input of a fourth flip-flop of which the output is connected to the set input of the first flip-flop through an AND gate of which the other input receives the sginal for triggering the regulation signal.

6. A device for protection according to claim 5, wherein the AND gate connected to the validation input of the first flip-flop receives other inhibition signals issuing from other switch mode power circuits, such as automatic starting control circuits.

Description:

BACKGROUND OF THE INVENTION

1. Field of the Invention

The present invention concerns stabilized power supplies known as "switch mode power supplies".

A switch mode supply functions in the following manner: a primary transformer winding receives a current that is, for example, issuing from a rectifying bridge receiving power from the alternating power mains. The current in the transformer is chopped by a switch (for example a power transistor) placed in series with the primary winding.

A control circuit of the transistor establishes periodic square pulses to turn on the transistor. During the square pulse period current passage is authorized; outside of this square pulse period current passage is prohibited.

On one (or several) secondary winding(s) of the transformer, an alternating voltage is thus received. This voltage is rectified and filtered in order to produce a direct voltage that is the output direct voltage of the switch mode supply.

In order to stabilize the value of this direct voltage, the duty cycle of the switch is modified, i.e. the ratio between the conduction duration and the blocking duration in a chopped period.

FIG. 1 represents by way of example a switch mode power structure manufactured by the applicant in which two integrated circuits are used. One of the circuits, CI1, acts to control the base of a power switching transistor Tp for applying thereto periodic control signals for putting under conduction and blocking control. This base control circuit CI1 is placed on the side of the primary winding EP of the transformer TA for reasons which will become apparent from the description given herein-below. The other integrated circuit, regulation circuit CI2, is on the contrary placed on the side of the secondary winding ES1 and is used to examine the output voltage Vs of the power supply in order to produce regulation signals that it transmits to the first integrated circuit through a small transformer TX. The first integrated circuit CI1 uses these regulation signals to modify the duty cycle of conduction of the switching transistor Tp and thus of adjusting the output voltage Vs of the power supply.


FIG. 1 shows the line of the public electric distribution mains under reference 10 (local supply circuit or mains at 110 or 220 volts, 50 or 60 hertz). This line is connected through a filter 12 to the input of a rectifying bridge 14, the output of which is connected on the one hand to a primary electric mass, represented throughout by a black triangle pointing downwards, and on the other hand to one end of the primary winding EP of the supply transformer TA.

A filtering capacitor 16 is placed in parallel on the outputs of the rectifying bridge 14. The other end of the primary winding is connected to the collector of the switching transistor Tp, the emitter of which is connected to the primary mass through a small current measuring resistance 18.

The transformer is provided with several secondary windings that are preferably galvanically insulated from the mains and connected for example to a secondary electric mass galvanically insulated from the primary mass.

In the present description, each of the secondary windings has one end connected to the secondary mass. The other end supplies a respective low-pass filtering capacitor through a respective rectifying diode.

Reference in the following description will be made to a single secondary winding ES1, connected by a diode 20 to a capacitor 22. The direct output voltage of the switch mode supply is the voltage Vs at the terminals of the capacitor 22; but it is well understood that other direct output voltages can be obtained at the terminals of the other filtering capacitors connected to the secondary windings. These output voltages constitute stabilized power supplies for utilization circuits (not represented). By way of example, a secondary winding ES2 supplies a stabilized power voltage of several volts for the regulation integrated circuit CI2 to which reference was made herein-above. It is thus checked that the circuit is not powered and therefore cannot supply signals as long as the switching does not function.

The same is true a priori for the base control integrated circuit CI1 of the power transistor Tp, which circuit is powered by a stabilized voltage supplied from a secondary winding ES3, from a diode 24 and from a capacitor 26 (it will be noted that this winding, although being a secondary winding is connected to the primary ground and not to the secondary mass, this for the very simple reason that the integrated circuit CI1 is necessarily galvanically connected to the primary).

However, as it is necessary to ensure starting of the chopped power supply, it has been foreseen that the power terminal 28 of the integrated circuit CI1 is also directly connected to the mains through a high resistance 30 and a diode 32; this is possible since the integrated circuit CI1 is connected to the primary ground; it is not possible for the circuit CI2 which must remain galvanically insulated from the mains. Once the switch mode power supply functions normally, the stabilized direct voltage issuing from the winding ES3 and from the diode 24 has priority over the voltage issuing from the mains and from the diode 32; this diode 32 is blocked and the direct power supply through the mains no longer intervenes after the initial starting phase.

The role of the integrated circuits CI1 and CI2
will now be defined.

The regulation circuit CI2 receives from a divider bridge 34, placed at the terminals of the capacitor 22, i.e. at the output of the stabilized power supply, data as to the value of the voltage to be stabilized Vs.

This data is compared with a desired value and applied to a pulse width modulator that establishes periodic square pulses having variable width in function of the value of the output voltage Vs; the lower is Vs the larger will be the width of the square pulses.

The square pulses are established at the switching frequency of the switch mode supply. This frequency is thus established on the side of the secondary of the circuit; it is generated either inside the circuit CI2, or outside in a circuit (not shown) in the form of a saw-tooth shaped voltage at the selected switching frequency. This saw-tooth voltage is used in a manner known per se to perform the width modulation.

The variable width square pulses, at the switching frequency, are applied to a primary winding 36 of a small transformer TX, the secondary winding, 38, of which is galvanically insulated from the primary, supplies positive and negative pulses to the rising and descending edges, respectively of the variable width square pulses.

It is these position and frequency pulses determined by the regulation circuit CI2, which constitute regulation signals applied to an input 40 of the base control circuit CI1.

The transformer TX is constituted by several coil turns wound on a ferrite rod, the turns of the primary and the turns of the secondary being sufficiently spaced apart from one another to respect the galvanic insulation standards between primary circuits and secondary circuits of the switch mode supply.

The base control integrated circuit CI1 comprises various inputs among which have been mentioned herein-above a power input 28 and a regulation signal input 40; a current measuring input 44 connected to the current measuring resistor 18; and an inhibition input allowing to check the magnetization state of a transformer. Furthermore, inputs can be provided to connect the elements (resistors, capacitors) that should form part of the integrated circuit itself but which for technological reasons (of bulk) or for practical reasons (possibilities of adjustment by the user) are externally mounted.

The integrated circuit CI1 furthermore comprises an output 46 which is intended to be connected by a direct galvanic connection to the base of the power transistor Tp. This output supplies square pulses for bringing the transistor Tp to the on or off state.


FIG. 2 represents partially the general structure of the integrated circuit CI1.

The output 46 of the circuit, intended for the base control of the transistor Tp, is the output of a push-pull amplification stage designated by the reference 48, this stage preferably comprising two separated amplifiers one of which receives square pulses which are inverted and delayed by several microseconds for to producing to the on state. Such amplifiers are well known.

The signals for switching to the on stae are issued from a logic flip-flop 50 having a set input 52 and a reset input 54. The set input triggers the on state of the power transistor. The reset input triggers the off state.

The set input 52(S) receives the pulses that pass through an AND gate 58, so that the triggering of the on state only occurs when several conditions are simultaneously satisfied; if a single condition is not satisfied, this is sufficient to inhibit the triggering of the on state.

The reset input 54(R) receives the pulses which pass through an OR gate 60, so that the interruption of the on state (after triggering of the on state) occurs once a halt signal is present on one of the inputs of this gate.

On the diagram of FIG. 2, the AND gate 58 has three inputs. One of these inputs receives periodic pulses issuing from an output 62 of a high frequency oscillator 64; the other inputs act to inhibit the transmission of these pulses.

The oscillator defines the switching period of the power supply (20 kilohertz for example). In normal operating state the oscillator 64 is synchronized by the regulation signals. In starting state it is self-oscillating at a free frequency defined by the values of a resistor Ro and of a capacitor Co outside the integrated circuit CI1 and respectively connected to an access terminal 66 and an access terminal 68. The free frequency Fo is as a rule slightly lower than the normal switching frequency.

The oscillator 64 is a relaxation oscillator that produces on an output 70 a saw-tooth, the reset to zero of which is set by the appearance of a positive pulse arriving at the terminal 40. This is the reason why the oscillator 64 is represented with an input connected to an output 72 of a separation and shaping circuit 74 that receives the regulation signals from the terminal 40 and shapes them by separating the positive pulses from the negative pulses. The shaping circuit 74 has two outputs: 72 for the positive pulses, 76 for the negative pulses (the notation of positive pulse and negative pulse will be retained in order to distinguish the triggering pulses for the on state and the triggering pulses for the off state even if the shaping circuit establishes pulses of a single sign on its two outputs 72 and 76).

The oscillator 64 has two outputs; an output 70 supplying a saw-tooth signal and an output 62 supplying a short pulse when the saw-tooth is reset to zero.

A pulse width modulator 78 is connected on the one
hand to the output 70 of the oscillator and on the other hand to an adjustable reference voltage through a resistor R1 outside the integrated circuit and connected to an access terminal 80 to the circuit. The modulator 78 supplies periodic square pulses synchronized with the oscillator signals, these square pulses defining a maximal duration of the on state Tmax beyond which the off state of the power transistor must be triggered in any case as a matter of security. These square pulses of modulator 78 are applied to an input of the OR gate 60. The duration Tmax is adjustable through the external resistor R1.

The elements that have been described herein-above ensure the essential of the operating at normal condition of the integrated circuit CI1. The following elements are more specifically provided for controlling the anomalous operating or the starting of the power supply.

A very low frequency oscillator 82 is connected to an external capacitor C2 through an access terminal 86. This external capacitor adjusts the very low oscillation frequency. The frequency can be 1 hertz, for example.

The oscillator 82 is a relaxation oscillator supplying a saw-tooth signal which is applied on the one hand to a threshold comparator 88 which establishes periodic square pulses which are synchronized on the saw-tooth at a low frequency of the oscillator. These square pulses have a brief duration compared to the saw-tooth period. This duration is fixed by the threshold of the comparator 88. It can be for example of 10% of the period. It must be long with respect to the free oscillation period of the high frequency oscillator 64 so that a burst of numerous pulses of the high frequency oscillator can be emitted and utilized during this 10% of the period at very low frequency. This burst defines an attempt at starting during the first part of a starting cycle. It is followed by a pause during the remainder of the period, i.e. during the remaining 90% of the period.

The oscillator 82 only functions for the starting. It is inhibited when the regulation signals appear on the terminal 40 and indicate that the switch mode supply is functioning. This is the reason why an inhibition control of this oscillator has been represented, connected to the output 72 of the shaping circuit 74 through a flip-flop 89 which changes its condition under the effect of the pulses appearing at the output 72. It is returned to its initial condition by the output 62 of the oscillator 64 when there are no more pulses on the output 71.

The saw-tooth signals of the oscillator at very low frequency are furthermore transmitted to a circuit 90 for producing a variable threshold whose function is to establish a threshold signal (current or voltage) having a first value Vs1 in normal operating condition, and a cyclically variable threshold between the first value and a second value at starting condition.

The threshold signal established by the circuit 90 is applied to an input of a comparator 92, the other input of which is connected to the terminal 44 already mentioned, in order to receive on this input a signal that is representative of the amplitude of the current flowing through the power switching device. The output of the comparator 92 is applied to an input of the OR gate 60. It thus triggers the off state of the power transistor Tp, after an on state firing, the off state occuring, when exceeding the threshold (fixed or variable) defined by the circuit 90 has been detected.

Another threshold comparator 94 has an input connected to the current measuring terminal 44 while another input receives a signal representing a third threshold value Vs3. The third value Vs3 corresponds to a current in the switch which is higher than the first value vs1 defined by the circuit 90. The output of the comparator 94 is connected through a latch 96 to an input of the AND gate 58 whereby if the current in the power switch exceeds the third threshold value Vs3, an interruption of the on state of the transistor Tp is not triggered (this interruption is triggered by the comparator 92) but an inhibition of any firing of the transistor. This inhibition lasts until the flip-flop 96 is reset to its initial state corresponding to a normal operating.

As a rule, this return will only occur when the integrated circuit CI1 will have ceased to be normally supplied with power and will be again set under voltage. For example, the return of the latch 96 occurs through a hysteresis threshold comparator 98 which compares one fraction of the power supply voltage Vcc of the circuit (drawn off from the terminal 28) with a reference value and which resets the latch during the first passage of Vcc above this reference after a drop of Vcc below another reference value that is lower than the first one (hysteresis).

Moreover, it can be specified that the output of the flip-flop 89 (which detects the presence of regulation signals on the terminal 40 thus the normal operating of the power supply) is connected to an input of an OR gate 100 which receives on another input the output of the comparator 88 so that the output of the comparator 88 ceases to inhibit the firing of the transistor Tp (inhibition during 90% of the very low frequency cycles) once the operating of the power circuit becomes normal.

OBJECT OF THE INVENTION

Therefore, in the device previously manufactured by the applicant and described in detail herein-above, particular procedures for the starting phases and particular protective procedures in the case of functioning incidents are foreseen.

The present invention aims at further improving the operating safety by detecting operating deficiencies over a longer period of time than was the case with circuits of the prior art. Although the invention presents a novel and distinct contribution with respect to the process of the prior art, the prior device has been described in full detail herein-above in order to render apparent the numerous restrictions which are imposed during production of a novel safety device which must take into account all the possible types of operating foreseen in an already existing circuit without introducing deficiencies or blockages in the normal operating of the circuit in its differnt modes. Consequently, any novel contribution to a complex structure such as that described herein-above requires numerous selections and very numerous attempts between various solutions that could appear a priori as simple must be carried out.

SUMMARY OF THE INVENTION


Therefore, the present invention provides a device for protection against extended overloading in switch mode power supplies comprising a main switch controlled by output signals from a flip-flop of which the inputs for setting to 1 and for resetting to zero receive regulation control signals, a first protection circuit supplying on the input for resetting to zero signals which have priority with respect to the regulation signals when the current in the main switch exceeds a predetermined threshold, further comprising a second protection circuit itself comprising:

means for detecting cycles for which the first protection circuit operates and interrupts the on state of the main switch prior to the arrival of the switching off order of the regulation signal;

memorization means accumulating at each cycle a value proportional to the duration between a signal of the detection means and the setting to 1 signal associated to the regulation signal of the following cycle; and

inhibition means for inhibiting the set input of the flip-flop when the memorization means have accumulated a signal higher than a predetermined threshold.

According to one embodiment of the present invention, the detection means comprise a second flip-flop, a third flip-flop and an AND gate:

the second flip-flop receiving at its reset input the output for starting the regulation, the set input of this flip-flop receiving the output of the AND gate and the output of this flip-flop controlling the memorization means;

the third flip-flop having its set input connected to the reset input of the second flip-flop, its reset input connected to the reset signal of the regulation signal, and its output connected to a first input of the AND gate,

the second input of the AND gate being connected to the output of the first protection circuit.

According to one embodiment of the present invention, the memorization means comprise a capacitor permanently discharged by discharging means and temporarily charged by charging means only when the detection circuit supplies a signal.

According to another embodiment of the invention, the inhibition means comprise a comparator comparing the signal accumulated by the memorization means with a reference value, the output signal of this comparator inhibiting the set input of the flip-flop when the memorized signal becomes higher than a reference value.

BRIEF DESCRIPTION OF THE DRAWING

These objects, features and advantages and others of the present invention will become apparent from the following embodiment given by way of non-limitative illustration with reference to the appended drawing in which:

FIGS. 1 and 2 illustrate a switch mode power supply according to the prior art and have been described herein-above;

FIG. 3 is a simplified representation of a protection circuit against the overloading of a switch mode power supply according to the prior art;

FIG. 4 illustrates the protection circuit against overloads of long duration according to the present invention for switch mode power supplies; and

FIGS. 5-a to to 5-b are time charts intended to illustrates the functioning of the circuits represented in FIGS. 3 and 4.

DESCRIPTION OF THE PREFERRED EMBODIMENTS


FIG. 3 once again represents in a simplified manner the essential components of the circuit represented in FIG. 2 constituting a protection circuit against the excess currents in the main transistor Tp. The on state in the transistor Tp is normally controlled by a signal available on a terminal 40, resulting from a pulse width modulation circuit which controls a flip-flop 50 through a shaping circuit 74. The flip-flop 50 energizes the base of the power transistor Tp through a preamplification circuit (driver) 48 and an access terminal 46. When the current in the power transistor exceeds a given threshold, the voltage at the terminals of a resistor 18 available at the terminal 44 is compared with a threshold voltage Vs by a comparator 92 and, should this voltage exceed the threshold, the reset input R of the flip-flop 50 is energized through an OR gate 60, the other input of which receives an output signal from the shaping circuit 74.

This protection device effectively protects the switch Tp against a current overloading but does not always allow good protection of the power supply, for example in the case of long duration overloading. In fact, there is no protection against excessive heating of the transformer TA or of the rectifying diodes 20 (cf. FIG. 1) or of other components of the circuit connected to the secondary of the main transformer and it is generally necessary to over-size these components in order to take into account long duration overloadings which could occur as a result, for example, of short-circuiting on the secondary winding.

The invention which will be described herein-below with respect to FIGS. 4 and 5 concerns a device which, added to the conventional current limitation circuit described herein-above, provokes the total and definitive shut down of the power supply in the case of long duration functioning of the current limitation system. Expensive over-sizing of certain components is thus avoided and the operating safety of the power supply is as a whole increased.

The restarting of the power supply can be obtained by the momentary setting out of voltage of the system or at least of the device concerned.

As represented on FIG. 4, the present invention comprises a circuit 100 for detecting the operating of an overload circuit, comprising flip-flops FF2 and FF3 and an AND gate 101, and a circuit 102 for memorization and inhibition of the switch mode power supply. The circuit 102 operates the above described base current control flip-flop 50 through an AND gate 58.

The memorization and inhibition circuit 102 comprises a capacitor 103, a discharge system constituted by a current supply 104 functioning permanently, a system for charging this capacitor constituted by a current supply 105 controlled in all or nothing by a switch 107 receiving the output of the detection circuit 100. When the detection circuit 100 indicates that the current limitation circuit in the power switch Tp does not function, only the discharge system 104 functions and the capacitor 103 remains discharged. When the current limitation system 100 is energized, the charge system (current supply 105) is activated. The ratio between the discharge current and the charge current is selected so that overall the capacitor 103 is charged. When the voltage at the terminals of the capacitor reaches a determined value, fixed by a comparator 106, a flip-flop FF4 is triggered which definitively inhibits the on state of the switch Tp.

In the circuit 100 for detecting the functioning of the current limitation circuit, the flip-flop FF2 has its reset input R2 connected to the output 72 of the form shaping circuit 74, its set input S2 connected to the output of the AND gate 101 and its output Q2 connected to the control terminal of the switch 107 of the circuit 102. The second flip-flop FF3 has its set input S3 connected to the output 72 of the shaping circuit 74, its reset input R3 connected to the output 76 of this shaping circuit and its output Q3 connected to a first input of the AND gate 101 of which the other input is connected to the output of the comparator 92 detecting the excess currents in the power transistor Tp.


FIG. 5 indicates a time chart of the signals appearing in different points of the circuit in four particular operating cases. In FIG. 5

the line a indicates the signals present at the terminal 40 or more exactly the control signals from which result the signals at the terminal 40 following the action of the insulating transformer TX (cf. FIG. 1). Those signals correspond to more or less long square pulses according to the error signal detected;

the line b indicates the signal present at the output 76 of the shaping circuit 74, normally provoking the setting to 1 of the flip-flop 50;

the line c indicates the signal at the output 76 of the shaping circuit 74, normally controlling the reset of the flip-flop 50;

the line d indicates the signal at the output Q2 of the flip-flop FF2 controlling the switch 107;

the line e indicates the signal Q3 at the output of the flip-flop FF3;

the line f indicates the signal at the input R of the flip-flop 50, i.e. the signal at the output of the OR gate 60. This signal corresponds to the rising edge of the pulse at the output 76 of the shaping circuit 74 or at the output of the comparator 92;

the line g indicates the current in the power transistor that corresponds to the signal present on the input 44 of the comparator 92;

the line h indicates the signal at the output of the comparator.

The operating of this circuit in four possible functioning modes will now be studied.

1. Normal operating without overloading


No signal is supplied to the output of the comparator 92 and it is the outputs 72 and 76 (signals of lines b and c) that control the inputs S and R of the flip-flop 50. The circuit 102 not receiving any output signal from the circuit 100 supplies to the output Q4 of the flip-flop FF4 a high level signal and the AND gate 58 is validated thereby allowing the output signal 72 of the shaping circuit 74 to reach the input S of the flip-flop 50.

2. Functioning in lower overloading limit

As shown by line g of FIG. 5, it concerns the case where t
he reset pulse of the flip-flop 50 tends to bring the switch Tp at the off state prior to an overloading detection (current in Tp higher than I Max) occuring, but where an overloading occurs between the off state order and the effective off state of the power transistor. This delay is due to the blocking period or storing time ts of the switch which is not nil in particular in the case where a high voltage bipolar transistor is utilized. The current limitation comparator 92 is thus energized. However, the output signal of the comparator 92 does not reach the flip-flop FF2 to supply an output signal Q2 since the flip-flop FF3 has been previously reset by the signal 76 and blocks the AND gate 101. the flip-flop FF2 thus remains at zero and as in the preceding case, the circuit 102 is not energized and the regulation circuit continues to operate normally. It would in fact be inconvenient to shut down the operating of the chopping power supply in this particular case.

3. Operating in moderate overloading

As in the previous case, it is the output signal 72 of the shaping circuit 74 that provokes the bringing to the on state of the power transistor but, as shown by line g, the overload level of the power transistor Tp is reached prior to the normal off state signal of the transistor (line c) occuring. In this case, the comparator 92 supplies a signal which is transmitted through AND gate 101 enabled by the flip-flop FF3 to the flip-flop Q2 which is set to 1. The switch 107 of the memorization and inhibition circuit 102 is thus closed and the charge process of the capacitor 103 begins.

It will be noted that the signal Q2 (line d) remains at high level until the triggering pulse of the following cycle (bringing of the output 72 at high level). Therefore, the earlier overloading arrives in the cycle, the more the signal Q2 is present during a long period. After several functioning cycles, the voltage accumulated on the capacitor 103 will be higher than the reference voltage VRef applied to the second terminal of the comparator 106. Subsequently, the flip-flop FF4 supplies a signal at low level to its output Q4 and the AND gate 58 invalidates the input S of the flip-flop 50. This occurs only if the overloading lasts over a certain number of cycles. Thus, the functioning of the switch mode power supply is definitively brought to the off state indicating an operating failure of the device, for example a short-circuiting of a secondary winding of the transformer TA (cf. FIG. 1). To start up again the switch mode power supply, it is necessary to apply a new signal to the input R4 of the flip-flop FF4. This input can for example be connected to an initialization device when the whole of the switch mode power supply is powered.

4. Operating under strong overloading

This operating mode is illustrated on the right side of FIG. 5. It is as a whole identical to the case of a moderate overloading but it has been represented only to show the elongation of the pulses Q2 when the overloading occurs very early in an operating cycle of the switch mode power supply.

The various advantages of the present invention thus become apparent. On the one hand; the operating delay time is easily programmable by means of a single component, for example the value of the capacity of the capacitor 103. On the other hand, automatically, due to the elongation of the pulse Q2 when the overloading occurs early in a cycle, the action delay is modulated in function of the intensity of the overloading. Therefore, the greater is the overloading, the shorter is the operating delay time.

Another advantage lies in the perfect simultaneity of the triggering of the timing of the device according to the invention and of the operating of the conventional limitation of the current as described in the description of the prior art. This results in very good operating security. The risk of spurious triggering of the device close to the lower current limit is thus prevented.

On the other hand, as has been seen, the device according to the invention operates well with a power switch constituted by a bipolar transistor in which the storage time is relatively long, but this circuit is perfectly adaptable to a switch of which the off state delay tends towards zero such as a MOS power transistor.

Similarly, accordng to another advantage of the invention, this circuit is perfectly compatible with the other protection and starting assistance circuits which utilized the circuits accordi
ng to the prior art. Indeed, it will be noted that the components of the circuit according to the invention are perfectly compatible with the components of the current limitation circuit described herein-above. Furthermore, the AND gate 58 that has the circuit at the off state when it is not operating bears the same reference as the AND gate 58 described in relation with FIG. 2. In fact, it can be the same gate comprising simply a supplementary input. Herein lies another advantage of the invention, i.e. it is perfectly compatible with the automatic starting circuit described in relation with FIGS. 1 and 2. In this automatic starting mode, which may be called burst mode, it is also desired to be able to detect and stop the power supply in the case of overloading. However, as mentioned herein-above in the initial burst method, the circuit operates only with a duty cycle of about 10%. In this case, the capacitor 103 risks to be insufficiently charged during this brief action period and to discharge during the 90% of non-operating. To overcome this, it is foreseen according to the present invention to inhibit the discharging of the capacitor 103 by providing a controlled switch (not represented) in series with the discharge current supply 104 and energized by a signal indicative of the fact that operating is taking place in the burst mode. Therefore, in the case of overloading in the burst method, the capacitor is charged a little at each burst and retains its voltage between the bursts. It is therefore possible to reach the voltage VRef after a certain number of burst. 

SCHNEIDER  STV707  DTV-2-7025-11 (49474A) Switched vertical deflection circuit with bidirectional power supply:
A switched vertical deflection circuit derives vertical deflection current from horizontal deflection energy. A single switching element operates during both horizontal trace and retrace intervals. Conduction of the switching element is controlled by a vertical control circuit to provide the desired vertical deflection current. Feedback to the control circuit is referenced to ground potential to eliminate nonlinearity caused by voltage supply variations. The vertical circuit voltage supply is adapted to sink as well as supply current, thereby stabilizing the supply.



1. A field deflection circuit for a video display apparatus, comprising:
a source of voltage;
a field deflection winding coupled to said source of voltage;
energy storage means coupled to said field deflection winding for providing field deflection current in said field deflection winding;
a source of line deflection rate energy incorporating a switching transistor;
means for applying a predetermined amount of said line deflection rate energy from said line deflection rate energy source to said energy storage means during a first portion of each line deflection interval and for removing a predetermined amount of energy from said energy storage means during a second portion of each line deflection interval; and
unidirectional current control means for completing a current path from said field deflection winding to a source of reference potential during a portion of a field deflection interval in response to switching of said transistor, said current path including said switching transistor.


2. The arrangement defined in claim 1 wherein said means for applying and removing line rate energy comprises a field effect transistor and an antiparallel diode.

3. The arrangement defined in claim 1, wherein said unidirectional current control means comprises a diode.

4. The arrangement defined in claim 1, wherein said source of voltage comprises a transformer winding and a capacitor and wherein said source of line deflection rate energy comprises a diode for providing damper action for said source of line deflection rate energy.

5. A field deflection circuit for a video display apparatus, comprising:
a source of direct voltage;
a field deflection winding coupled to said source of direct voltage;
energy storage means coupled to said field deflection winding for providing field deflection current in said field deflection winding;
a source of line deflection rate energy;
means for applying a predetermined amount of said line deflection rate energy from said line deflection rate energy source to said energy storage means during a first portion of each line deflection interval and for removing a predetermined amount of energy from said energy storage means during a second portion of each line deflection interval; and
first and second unidirectional current control means coupled to said source of direct voltage for clamping the level of said direct voltage within a predetermined range independent of said field deflection current.


6. A field deflection circuit for a video display apparatus, comprising:
a source of voltage;
a field deflection winding coupled to said source of voltage;
energy storage means coupled to said field deflection winding for providing field deflection current in said field deflection winding;
a source of line deflection rate energy;
means for applying a predetermined amount of said line deflection rate energy from said line deflection rate energy source to said energy storage means during a first portion of each line deflection interval and for removing a predetermined amount of energy from said energy storage means during a second portion of each line deflection interval; and
first unidirectional current control means for completing a current path from said source of voltage to said field deflection winding for supplying current to said field deflection winding and second unidirectional current control means for completing a current path from said field deflection winding to said source of voltage for sinking current from said field deflection winding.


7. A field deflection circuit for a video display apparatus, comprising:
a source of direct voltage;
a capacitor;
a field deflection winding coupled to said source of direct voltage and to said capacitor;
energy storage means coupled to said field deflection winding for providing field deflection current in said field deflection winding, said deflection current generating an ac ripple component on said capacitor;
a source of line deflection rate energy;
means for applying a predetermined amount of said line deflection rate energy from said line deflection rate energy source to said energy storage means during a first portion of each line deflection interval and for removing a predetermined amount of energy from said energy storage means during a second portion of each line deflection interval; and
unidirectional current control means coupled to said source of direct voltage for reducing the magnitude of said ac ripple component.



Description:
This invention relates to deflection circuits for television receivers and, in particular, to vertical deflection circuits which derive power from horizontal deflection energy.
Synchronous switched vertical deflection circuits operate by storing a portion of the horizontal trace or retrace energy each horizontal deflection cycle. This energy is applied to the vertical deflection winding in order to provide the desired vertical deflection current in the deflection windings. The amount of horizontal rate energy that is stored each horizontal interval is carefully controlled in order to provide the correct amount of vertical deflection current.
U.S. Pat. No. 4,048,544 discloses a switched vertical deflection circuit in which a pair of SCRs are selectively rendered conductive in order to permit portions of positive and negative polarity horizontal retrace pulses to charge a capacitor. The capacitor is connected to the vertical deflection windings and discharges through the winding to provide the desired vertical deflection current. The gating signals for the SCRs are provided by pulse width modulating circuits.
FIG. 1 illustrates a prior art circuit which utilizes a single switch comprising a thyristor and diode combination, such as an ITR, and a single storage coil L s to effect horizontal-rate charge and discharge of a storage capacitor C y which supplies vertical deflection current. In the circuit shown in FIG. 1, the supply capacitor 15 charges through the vertical deflection winding V y . This causes a large amount of vertical parabola voltage to be superimposed on the 23 volt supply. This may disrupt the operation of other receiver circuits operating from the 23 volt supply. Also, if a circuit malfunction should cause the thyristor to fail to turn on, capacitor 15 will charge via the ITR diode to a level greater than the 23 volt power supply, which may damage the vertical control circuit or other receiver circuits. This requires the use of a protection circuit 16 to disable the receiver if the level of the 23 volt supply increases.
The present invention is directed to a switched vertical deflection circuit that advantageously incorporates only one switching element yet provides more economy and greater reliability as compared to the single element switched vertical deflection circuit of FIG. 1.
In accordance with an aspect of the present invention, a vertical deflection circuit for a video display apparatus comprises a vertical deflection winding and a capacitor connected to the vertical deflection winding for providing vertical deflection current to the winding. A source of horizontal deflection rate energy incorporates a switching transistor. A switch applies a predetermined amount of horizontal rate energy to the capacitor during a first portion of each horizontal deflection interval and removes a predetermined amount of energy from the capacitor during a second portion of each horizontal deflection interval. Unidirectional current control means completes a current path from the vertical deflection winding to a source of reference potential by way of the transistor in response to switching of the transistor.
In the accompanying drawing, FIG. 1 is a schematic and block diagram of a switched vertical deflection circuit of the prior art;
FIG. 2 is a schematic and block diagram of a switched vertical deflection circuit in accordance with an aspect of the present invention;
FIGS. 3 and 4 illustrate waveforms associated with the circuit of FIG. 2; and
FIG. 5 is a schematic diagram of a practical embodiment of the switched vertical deflection circuit of the present invention.
The prior art switched vertical deflection circuit shown in FIG. 1 incorporates a single switching element, such as an ITR, which has its conduction controlled by a vertical control circuit 10. During the horizontal retrace interval, current flows from ground, through the diode of the ITR, winding 11 of a high voltage transformer 12, storage coil L s and charges capacitor C y . The charge on capacitor C y then causes a deflection current to flow from C y through the vertical deflection winding V Y and the sampling resistor R s . The voltage developed across sampling resistor R s is sensed by vertical control circuit 10 which in turn controls the conduction of the SCR element of the ITR.
The SCR is conductive during a portion of the horizontal trace interval. During conduction of the SCR, current flows from the +23 volt supply through deflection winding V y , coil L s , winding 11 and the SCR to ground. Controlling the conduction of the SCR by shifting the occurrence of the SCR trigger pulses during the horizontal trace interval provides the desired sawtooth vertical deflection current in deflection winding V y .
In the prior art circuit of FIG. 1 the voltage across sampling resistor R s is determined by the deflection winding voltage and the level of the +23 volt supply. The +23 volt supply is generated via a winding 17 of a high voltage transformer 12. Load variations of other receiver circuits may cause variations or modulation of the +23 volt supply via the flyback transformer 12. This may in turn alter the voltage developed across sampling resistor R s , causing nonlinearity distortion in the vertical deflection current. A possible solution would require a common mode rejection input circuit for the feedback input 13 and power input 14 of the vertical control circuit 10, which would compensate for variations in the +23 volt supply level.
Vertical parabola voltage (ripple) developed across the storage capacitor 15 may be superimposed on the +23 volt supply, thereby disrupting the operation of other circuits connected to this supply. Also, in the prior art circuit of FIG. 1, failure of the SCR to trigger causes capacitor 15 to charge to a level much higher than the +23 volt supply via the diode of the SCR. This increased voltage may damage the vertical control circuit or other receiver circuits, thereby necessitating protection circuit 16, which illustratively disables the receiver if the voltage across capacitor 15 increases beyond a predetermined level.
FIG. 2 illustrates a power supply and vertical or field deflection circuit in accordance with an aspect of the present invention. A vertical control circuit 20 provides width modulated horizontal or line rate switching signals to a switching element 21, illustratively shown as comprising a Darlington transistor 18 and an integrated antiparallel diode 19. Transistor 18 may comprise a power field effect transistor which is advantageous when multiple horizontal rate deflection circuits are provided, such as are used with computer monitor or video display terminals. Switching element 21 is coupled via a winding 23 of high voltage transformer 24 and storage coil 25 to a capacitor 26. Capacitor 26 is coupled to one terminal of a vertical deflection winding 27. The other terminal of vertical deflection winding 27 is coupled to a voltage supply designated +V 1 . The +V 1 supply is generated via a winding 30 of transformer 24, rectifying diode 31 and filter capacitor 32. The +V 1 supply may also be used to power other receiver circuits.
A horizontal output transistor 33 is switched at the horizontal deflection rate by signals applied to its base from horizontal oscillator and driver circuits 34. The collector of transistor 33 is coupled to a voltage supply designated +V 2 via a winding 35 of transformer 24. Transistor 33 is also coupled to a horizontal deflection winding 36, an S-shaping capacitor 38, and a resonant retrace capacitor 37. A diode 40 is coupled in series with diode 31 between winding 30 and the collector of transistor 33.
During the horizontal retrace interval, transistor 33 is cut off by horizontal oscillator and driver circuit 34, causing a resonant retrace pulse to be formed across winding 35, as shown in FIG. 3A. This in turn causes a similar pulse to be formed across windings 30 and 23. With transistor 18 of switching element 21 turned off by vertical control circuit 20, a horizontal rate current will circulate from winding 23 through energy storage coil 25, capacitor 26 and diode 19 back to winding 23. As a result, capacitor 26 charges to a level greater than the +V 1 level, causing a negative deflection current component of i 27 to flow through winding 27 and resistor 22. When transistor 18 is rendered conductive by signals from vertical control circuit 20, shown in FIG. 3B, a horizontal rate current component circulates from winding 23 through transistor 18, capacitor 26 and energy storage coil 25. As a result, a positive current component of i 27 flows from the +V 1 source through winding 27 and resistor 22 to ground. The deflection current i 27 is shown in FIG. 4C. The current through winding 23 and switching element 21 is shown in FIG. 3C at the horizontal deflection rate and in FIG. 4A at the vertical deflection rate. The positive current represents current flow through transistor 18, while the negative current represents current flow through diode 19.
Conductor 28, carrying drive signals for transistor 18, and feedback conductor 29 are of high impedance, as is deflection winding 27, so that horizontal rate current circulates only through winding 23, coil 25, capacitor 26 and switching element 21. Deflection winding 27 represents too high an impedance for horizontal rate currents. The horizontal rate current loop is controlled by vertical control circuit 20 and forms a variable voltage battery having terminals across capacitor 26. The horizontal rate voltage across capacitor 26 is such that the desired vertical deflection current i 27 passes through capacitor 32, deflection winding 27, the circulating horizontal rate current loop and sampling resistor 22. The horizontal rate components are integrated by the large inductance of winding 27. It can be further seen that the current through resistor 22 is equal to the deflection current i 27 . The voltage developed across resistor 22 is proportional to i 27 , the vertical deflection current.
FIGS. 3A, 3B and 3C illustrate the dynamic operation of the circuit. The switching of Darlington transistor 18 is controlled by width modulated base drive current pulses shown in FIG. 3B. The turn-on time is modulated between times t 1 and t 3 . The turn-off time is common at time t 4 , the end of the horizontal trace interval. Turn-off of transistor 18 is not only provided by the base drive signal but also by the inverting retrace voltage across winding 23. At the beginning of the vertical trace interval at the top of the screen, transistor 18 is rendered conductive between times t 3 and t 4 . The positive portion of current i 23 is much smaller than the negative one resulting in a positive voltage across capacitor 26, as shown in FIG. 3D and in a negative deflection current i 27 , as shown in FIG. 4C. Vertical control circuit 20 advances the turn-on time of transistor 18. At time t 2 , the center of the vertical trace interval, the positive and negative portions of i 23 are equal, the voltage across capacitor 26 equals +V 1 , and the deflection current i 27 is zero. A further advance of the turn-on time of transistor 18 toward t 1 , near the bottom of the screen, results in increasing positive portions and decreasing negative portions of current i 23 . The voltage across capacitor 26 decreases and deflection current i 27 increases in a positive direction. During the vertical retrace interval, transistor 18 is cut off. Deflection winding 27 and capacitor 26 resonate for one half cycle via resistor 22 and capacitor 32. This produces a large vertical retrace voltage pulse, as shown in FIG. 4B, and reverses the deflection current i 27 . At the beginning of the vertical trace interval, the voltage across capacitor 26 and the deflection current i 27 are of the proper magnitude and polarity and must only be maintained by current i 23 . The amplitude of the positive current component of i 23 through transistor 18 also modulates the negative current component of i 23 through diode 19. This occurs because the di/dt of current i 23 during the interval t 4 - t 5 is determined by the storage coil 25. Therefore, a high transistor current causes a low diode current (bottom) and conversely a low transistor current permits a high diode current (top).
At the beginning of the vertical trace interval, transistor 18 is conductive for only a short period of time, so that the voltage across capacitor 26, shown at the horizontal deflection rate in FIG. 3D and at the vertical deflection rate in FIG. 4B, will be of such a polarity that deflection current, shown in FIG. 4C, flows from capacitor 26 through deflection winding 27 in the +V 1 supply. The vertical rate current path is completed through capacitor 32. The additional charge on capacitor 32 from deflection current i 27 is fed back to the high voltage transformer 24 via winding 30 and diode 40. Diode 40 is rendered conductive by horizontal output transistor 33. Diodes 31 and 40 act also as damper diodes for the horizontal deflection output circuit. The presence of diode 40 therefore allows the +V 1 supply to sink current, thereby eliminating the need for a protection circuit as shown in the prior art arrangement illustrated in FIG. 1. The level of the +V 1 supply is clamped bidirectionally by diodes 40 and 31 to the horizontal trace voltage across winding 30, thereby stabilizing the +V 1 supply. This arrangement also reduces the amount of voltage ripple that appears across capacitor 32, as shown in FIG. 4D. The current flow in winding 30 is shown at the horizontal and vertical deflection rates in FIGS. 3E and 4E, respectively. The positive current represents current flow in diode 31 while the negative current represents current flow in diode 40. The unequal current amplitudes occur because of other load circuits coupled to the +V 1 supply. The presence of these load circuits increases current through diode 31 and decreases current through diode 40.
As previously described and as shown in FIG. 3B, at the beginning of the vertical trace interval transistor 18 is conductive for only a short time. This results in capacitor 26 being charged above the level of the +V 1 supply, as shown in FIG. 4B, causing deflection current to flow from capacitor 26 through vertical deflection winding 27 to the +V 1 supply. During the vertical trace interval, vertical control circuit 20 progressively advances the conduction of transistor 18 each horizontal trace interval, as shown in FIG. 3B, so that transistor 18 conducts for a progressively greater length of time. This causes the net charge on capacitor 26 to progressively decrease through the vertical trace interval, thereby resulting in the desired vertical deflection current through winding 27, as shown in FIG. 4C.
The voltage developed across deflection current sampling resistor 22, as shown in FIG. 4F, is produced by deflection current i 27 and provides feedback to vertical control circuit 20. This feedback provides information to vertical control circuit 20 to enable the driving of transistor 18 into conduction at the appropriate time each horizontal interval to generate the desired vertical deflection current. The feedback resistor 22 is referenced to ground potential so that supply loading variations by other receiver circuits will not adversely affect the feedback voltage. A common mode rejection circuit in vertical control circuit 20 is therefore not required. This reduces the cost and simplifies the construction of vertical control circuit 20.





FIG. 5 illustrates a particular embodiment of a power supply and switched vertical deflection circuit in accordance with the present invention, illustratively for use with a kinescope having a 110° deflection angle. Components corresponding to those in FIG. 2 are designated with the same reference numerals. Representative component values are also given. A CA339 quad comparator is used as the basis for the vertical control circuit, which operates in the following manner. Resistor 50, along with capacitors 51 and 52, and emitter follower transistor 53 form a conventional vertical sawtooth generator. Comparators 54 and 55, incorporated within integrated circuit 56, combine with the sawtooth generator to form a vertical rate oscillator. During the vertical trace interval, capacitors 51 and 52 are charged positively via resistor 50 until the emitter voltage of transistor 53 applied to pin 8 of integrated circuit 56 reaches the voltage present at pin 9. When this occurs, comparator 54 switches low and causes the voltage levels at pin 9 and pin 11 to go low. Comparator 55 then switches low and discharges capacitors 51 and 52 to the low voltage level at pin 9. The output collectors of comparators 54 and 55 then open and a new charge (trace) cycle begins. Hold control resistor 60 determines the high voltage level at pin 9 and therefore determines the length of the charge cycle. Vertical sync pulses are integrated by capacitor 61 and differentiated by capacitor 62. The positive transient of the processed vertical sync pulse sits on the vertical ramp and switches comparators 54 and 55 prior to switching by the emitter voltage of transistor 53.
Comparator 63 serves as a vertical blanking pulse generator. During the vertical trace interval the voltage across capacitor 64 at pin 4 is higher than the voltage at pin 5 because of the voltage drop across resistor 65. Switching of comparator 54 discharges capacitor 64, causing comparator 63 to open. Comparator 63 remains open until capacitor 64 becomes charged to a voltage level higher than the voltage at pin 5. Blanking time is adjustable by varying the value of capacitor 64. Comparator 66 serves as a pulse width modulator. The vertical sawtooth ramp is fed via the height control resistor 67, coupling capacitor 70 and resistor 71 to pin 7 of comparator 66. Resistors 72 and 73 determine the dc bias on pin 7. Resistor 71 determines the amplitude of the vertical ramp voltage applied to pin 7. Capacitor 70 provides the deflection current S-shaping at the beginning of vertical trace.
Horizontal retrace pulses via resistor 74 charge capacitor 75 to obtain a horizontal ramp which is compared with the vertical sawtooth. The output of comparator 66 at pin 1 short circuits to ground the voltage at the junctions of resistors 76 and 77 to provide base drive to transistor 21. Capacitor 80 is required to switch the base voltage below ground because the emitter of transistor 21 is floating on the sampling resistor 22 and swings between ±1 volt. Centering control resistor 81 adjusts the dc bias on pin 6. Illustratively, vertical deflection winding 27 has an inductance of 25 mH, and a resistance of 9.5 ohms.
The previously described switched vertical deflection circuit is desirably utilized at vertical deflection rates of 100 Hz or greater, such as could be provided by progressive scan systems or in digital deflection circuits.
























































IF VIDEO SOUND APMPLIFIER AND DETECTOR UNIT
33413-31620

- TDA4445A QUASI PARALLEL SOUND PROCESSING WITH QUADRATURE INTERCARRIER DEMODULATOR





















- TDA4453

Video IF Amplifier for Multistandard TV Receiver and VTR
Appliances
Technology: Bipolar
Features
Interference suppression
Standard B/G-L suitable, processes negatively and
positively modulated IF-signals with equal polarity of
the output signal
Ultra white inverter and ultra black limiter for
reducing transmission interference
Internally noise protected gain control, no flyback
pulses required
Expanded video frequency response allows the
demodulation of amplitude modulated MAC signals
High input sensitivity
Minimal intermodulation interference
Fast AGC by controlled discharge of the
AGC capacitor
Standard L mode: AGC acting on peak white level,
capacitor discharge control by averaged video signal
Standard B/G: AGC acting on the sync. pulse peak
Small differential error
Constant input impedance
Video output voltage with narrow tolerance
Adapted output for insertion of ceramic transducers as
intrinsic sound trap
Connecting and basic circuitry compatible to the
TEMIC video IF type programme - permits building
block system for video IF module

- U2829B

















































Viewing of Digital Audio - Sound Processing: ADC 2310 (ITT ADC2310) and APU 2470 (ITT APU2470)




































Parts.
Digital Video
Contains DIGIT2000 Digital Video Processing ChipSet.

VCU 2133 A (ITT VCU2133 A) (Video Codec Decodec Unit)
DPU 2543 (ITT DPU2543) (Digital Deflection Processor Unit)
PVPU 2203 (ITT PVPU2203) (PAL and Video Processor Unit)
DTI 2222 (ITT DTI2222) (Digital Transient Improvement [Chroma])
TPU 2732 (ITT TPU2732) (Teletext Processor Unit)
MCU 2600 (ITT MCU2600)
(Main Clock Unit)















































ITT DIGIVISION CHIPSET FUNCTIONS SCHNEIDER CHASSIS DTV2.

SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 Set of three integrated circuits for digital video signal processing in color-television receivers: ITT DIGIVISION.

DIGITAL CRT TUBE Cathode RAY CURRENT CONTROL / Cut OFF / Drive and processing.
In this IC set, the dark currents and the white levels of the three electron guns, the leakage currents of the cathodes, and a light-detector current are measured during four successive vertical blanking intervals. The cathode leakage currents and the dark currents are measured in the first half of the vertical blanking interval, and the light-detector current and the white level currents are measured at the end of this interval. From these measured data and alignment data stored in a reprogrammable memory (ps), a microprocessor (mp) contained together with the memory (ps) in an integrated circuit (ic2) derives operating data for the picture tube (b) as well as further data. These operating data are transferred over a wire of a chroma bus (cb), over which chroma signals are transferred during the vertical sweep, into a shift register (sr) of a further integrated circuit (ic3) at the beginning of each vertical blanking interval, from where they are passed on to the picture tube (b) in groups via digital-to-analog converters and analog amplifiers. By the use of the chroma bus for a dual purpose, and the successive measurements of the above-mentioned picture-tube data, a saving of external terminals of the integrated circuits (ic1, ic2, ic3) is achieved.

1. Set of three integrated circuits(ic1, ic2, ic3) for digital video-signal processing in color-television receivers,
wherein the first integrated circuit (ic1) contains an analog-to-digital converter (ad) followed by a first bus interface circuit (if1) for a serial data bus (sb), and a first multiplexer (mx1) following the first bus interface circuit (if1), the analog-to-digital converter (ad) being fed with measured data corresponding to the cathode currents of the picture tube (b) flowing at "black" (="dark current") and "white" (="white level") in each of the three electron guns, and with the signal of an ambient-light detector (ls) via a second multiplexer (mx) in the vertical blanking interval, and the first multiplexer (mx1) being fed with the processed digital chrominance signals (cs),
wherein the second integrated circuit (ic2) contains a microprocessor (mp), an electrically reprogrammable memory (ps), and a second serial-data-bus interface circuit (if2) corresponding to the first bus interface circuit (if1), the memory (ps) holding alignment data and nominal dark-current/white-level data of the picture tube used (b) which were entered by the manufacturer of the color-television receiver and, together with the measured data, are used by the microprocessor (mp) to generate video-signal-independent operating data for the picture tube (b), and
wherein the third integrated circuit (ic3) contains a demultiplexer (dx), an analog RGB matrix (m), and three analog amplifiers (vr, vg, vb) each designed to drive one of the electron guns via an external video output stage (ve), the dark current of the picture tube (b) being adjusted via the operating point of the respective analog amplifier, and the white level of the picture tube (b) being adjusted by adjusting the gain of the respective amplifier after digital-to-analog conversion, and with the demultiplexer (dx) connected to the first multiplexer (mx1)of the first integrated circuit (ic1) via a chroma bus (cb),
Characterized by the Following Features:
The first multiplexer (mx1) consists of three electronic switches (s1, s2, s3),
the first of which (s1) has its input grounded through a first resistor (r1) and connected to the collectors of external transistors (tr, tg, tb) which are each associated with one of the electron guns and the base of each of which is driven by the associated video output stage, while the emitter is connected to the associated electron gun system, and the output of the first switch (s1) is connected to the input of the analog-to-digital converter (ad);
the second of which (s2) has its input connected to the light detector (ls), while its output is coupled with the input of the analog-to-digital converter (ad), and
the third of which (s3) has its input connected to the input of the first electronic switch (s1) via a second resistor (r2), and its output is grounded, the value of the second resistor (r2) being about one order of magnitude smaller than that of the first resistor (r1);
the three electronic switches (s1, s2, s3) have the following positions:
______________________________________
s1 s2 s3
______________________________________


during vertical

closed open closed

sweep

during vertical

closed/open

open/closed

open/closed

retrace: for

leakage/light-

det. current meas.

for white level

closed open closed

measurement

for dark current

closed open open

measurement
______________________________________
the measurements of the dark current together with the white level of each electron gun and the measurements of the light-detector current together with the cathode leakage currents are performed in four successive vertical blanking intervals;
to this end, the cathodes are connected at one end to a voltage for blacker than black (us), and at the other end to a voltage for black (ud) and then to a voltage for white (uw) in accordance with the following table:
______________________________________
Measurement in the first at about the Vertical half of the end of the blanking vertical vertical interval blanking blanking Cathode No. interval interval red green blue
______________________________________


1 Leakage cur-

Light-detect-

us us us

rents of the

or current

cathodes

2 Dark current

White level

ud/uw us us

red red

3 Dark current

White level

us ud/uw us

green green

4 Dark current

White level

us us ud/uw

blue blue

______________________________________
the measured data are transferred from the analog-to-digital converter (ad) to the microprocessor (mp) of the second integrated circuit (ic2) via the two interface circuits (if1, if2) and the data bus (sb) at an appropriate instant, and
the video-signal-independent operating data for the picture tube (b), which are generated by the microprocessor (mp), are transferred from the second integrated circuit (ic2) via the two interface circuits (if1, if2) and a line (db) to the first multiplexer (mx1) of the first integrated circuit (ic1) at an appropriate instant, and from there over a wire of the chroma bus (cb) into a shift register (sr) of the third integrated circuit (ic3) shortly after the beginning of the next vertical blanking interval, the parallel outputs of which shift register (sr) are combined in groups each assigned to one type of operating value, and each of the groups is connected to one digital-to-analog converter (dh, ddr, ddg, ddd, dwr, dwg, dwb) which drives the RGB matrix (m) or the respective analog amplifier (vr, vg, vb).
. 2. An integrated-circuit set as claimed in claim 1, characterized in that the voltage for blacker than black (us) is applied to the cathodes of the picture tube (b) during the data transfer to the shift register (sr). 3. An integrated-circuit set as claimed in claim 2, characterized in that the microprocessor (mp) determines the appropriate instant for the measured-data transfer, and that, if a measurement has not yet been finished at that instant, the measured data of the corresponding earlier measurement are transferred. 4. An integrated-circuit set as claimed in claim 3, characterized in that the measurement performed in a vertical blanking interval is not enabled until the data of the preceding measurement have been transferred to the microprocessor (mp). 5. An integrated-circuit set as claimed in claim 2, characterized in that the measurement performed in a vertical blanking interval is not enabled until the data of the preceding measurement have been transferred to the microprocessor (mp). 6. An integrated-circuit set as claimed in claim 1, characterized in that the microprocessor (mp) determines the appropriate instant for the measured-data transfer, and that, if a measurement has not yet been finished at that instant, the measured data of the corresponding earlier measurement are transferred. 7. An integrated-circuit set as claimed in claim 6, characterized in that the measurement performed in a vertical blanking interval is not enabled until the data of the preceding measurement have been transferred to the microprocessor (mp). 8. An integrated-circuit set as claimed in claim 1, characterized in that the measurement performed in a vertical blanking interval is not enabled until the data of the preceding measurement have been transferred to the microprocessor (mp).
Description:
The present invention relates to a set of three integrated circuits for digital video signal processing in color-television receivers as is set forth in the preamble of claim 1. An IC set of this kind is described in a publication by INTERMETALL entitled "Eine neue Dimension-VLSI-Digital-TV-System", Freiburg im Breisgau, September 1981, on pages 6 to 11 (see also the corresponding English edition entitled "A new dimension-VLSI Digital TV System", also dated September 1981).
The first integrated circuit, designated in the above-mentioned publications by "MAA 2200" and called "Video Processor Unit" (VPU), includes an analog-to-digital converter followed by a first serial-data-bus interface circuit which, in turn, is followed by a first multiplexer. During the vertical blanking interval, the analog-to-digital converter is fed, via a second multiplexer, with measured data corresponding to the cathode currents of the picture tube flowing at "black" (="dark current") and "white" ("white level") in each of the three electron guns, and with the signal of an ambient-light detector. The processed digital chrominance signals are applied to the first multiplexer.
The second integrated circuit, designated by "MAA 2000" and called "central control unit" (CCU) in the above publications, contains a microprocessor, an electrically reprogrammable memory, and a second serial-data-bus interface circuit. The memory holds alignment data and nominal dark-current/white-level data entered by the manufacturer of the color-television receiver. From these data and the measured data, the microprocessor derives video-signal-independent operating data for the picture tube.
The third integrated circuit, designated by "MAA 2100" and called "video-codec unit" (VCU) in the above publications, includes a demultiplexer, an analog RGB matrix, and three analog amplifiers each designed to drive one of the electron guns via an external video output stage. After digital-to-analog conversion, the dark current of the picture tube is adjusted via the operating point of the respective analog amplifier, and the white level of the picture tube is adjusted by adjusting the gain of the respective analog amplifier. The demultiplexer is connected to the first multiplexer of the first integrated circuit via a chroma bus.
As to the prior art concerning such digital color-television receiver systems, reference is also made to the journal "Elektronik", Aug. 14, 1981 (No. 16), pages 27 to 35, and the journal "Electronics", Aug. 11, 1981, pages 97 to 103.
During the further development of the prior art system following the above-mentioned publication dates, the developers were faced with the problem of how to accomplish the dark-current/white-level control of the picture tube within the existing system, particularly with respect to measured-data acquisition and transfer and to the transfer of the operating data to the picture tube.
Another requirement imposed during the further development of the prior art system was that the leakage currents of the electron guns of the picture tube be measured and processed within the existing system. The solution of these problems is to take into account the requirement that the number of external terminals of the individual integrated circuits be kept to a minimum.
The object of the invention as claimed is to solve the problems pointed out. The essential principles of the solution, which directly give the advantages of the invention, are, on the one hand, the division of the measurement to four successive vertical blanking intervals and, on the other hand, the utilization of one wire of the chroma bus at the beginning of the next vertical blanking interval as well as the measurement of the ambient light by means of the light detector and the measurement of the leakage currents during a single vertical blanking interval.
The invention will now be explained in more detail with reference to the accompanying drawing, which is a block diagram of one embodiment of the IC set in accordance with the invention. It shows the first, second, and third integrated circuits ic1, ic2, and ic3, which are drawn as rectangles bordered by heavy lines. The first integrated circuit ic1 includes the analog-to-digital converter ad, which converts the measured dark-current, white-level, ambient-light, and leakage-current data into digital signals, which are fed to the first bus interface circuit if1. The latter is connected via the line db to the first multiplexer mx1, which interleaves data from the first bus interface circuit if1 with digital chrominance signals cs produced in the first integrated circuit ic1, and places the interleaved signals on the chroma bus cb. The generation of the digital chrominance signals cs is outside the scope of the present invention and is disclosed in the references cited above.
The first integrated circuit ic1 further includes the second multiplexer mx2, which consists of the three electronic switches s1, s2, s3, and represents a subcircuit which is essential for the invention. The input of the first switch s1 is grounded through the first resistor r1, and connected to the collectors of the external transistors tr, tg, tb, each of which is associated with one of the electron guns. Via the base-emitter paths of these transistors, the cathodes of the three electron guns are driven by the video output stages ve. The final letters r, g, and b in the reference characters tr, tg, and tb and in the reference characters explained later indicate the assignment to the electron gun for RED (r), GREEN (g), and BLUE (b), respectively. The output of the first switch s1 is connected to the input of the analog-to-digital converter ad.
The input of the second switch s2 is connected to the light detector ls, which has its other terminal connected to a fixed voltage u and combines with the grounded resistor r3 to form a voltage divider. The input of the second switch s2 is thus connected to the tap of this voltage divider, while the output of this switch, too, is coupled to the input of the analog-to-digital converter ad.
The input of the third switch s3 is connected to the input of the first switch s1 via the second resistor r2, while the output of the third switch s3 is grounded. The value of the resistor r1 is about one order of magnitude greater than that of the resistor r2.
For the whole duration of the picture shown on the screen of the picture tube b, and throughout the vertical sweep, the first switch s1 and the third switch s3 are closed, and the second switch s2 is open. During the vertical retrace interval, for the white-level measurement, the switches s1, s3 are closed, and the switch s2 is open; for the dark-current measurement and the leakage-current measurement, the switch s1 is closed, and the switches s2, s3 are open, and for the light-detector-current measurement, the switches s2, s3 are closed, and the switch s1 is open.
The measurements of the dark current and the white level of each electron gun and the measurements of the light-detector current and the leakage currents are made in four successive vertical blanking intervals. One end of the respective cathode is connected to a voltage us for blacker-than-black, and the other end is connected to a voltage ud for black and then to a voltage uw for white, in accordance with the following table:
______________________________________
Measurement in the first at about the Vertical half of the end of the blanking vertical vertical interval blanking blanking Cathode No. interval interval red green blue
______________________________________


1 Leakage cur-

Light-detect-

us us us

rents of the

or current

cathodes

2 Dark current

White level

ud/uw us us

red red

3 Dark current

White level

us ud/uw us

green green

4 Dark current

White level

us us ud/uw

blue blue

______________________________________
The voltage ud for black is, as usual, a voltage which just causes no brightness on the screen of the picture tube b, i.e., a voltage just below the dark threshold of the picture tube. The voltage us for blacker-than-block is then a cathode voltage lying further in the black direction than the voltage for black. The voltage for white is the voltage for the screen brightness to be measured; the brightness of the screen is generally below the maximum permissible value.
Thus, two measurements are made during each vertical blanking interval, namely one in the first half, preferably at one-third of the pulse duration of the vertical blanking interval, and the other at about the end of the first half. During the four successive vertical blanking intervals, the first measurement determines the leakage currents of the cathodes and the dark currents for red, green, and blue. The second measurements determine the light-detector current and the white levels for red, green, and blue. During the measurement of the cathode leakage currents and the light-detector current, all three cathodes are at the voltage us. During the measurements of the dark current and the white level of the respective cathode, the latter is connected to the respective dark-current cathode voltage ud and white-level cathode voltage uw, respectively, while the cathodes of the two other electron guns, which are not being measured, are at the voltage us.
The second integrated circuit circuit ic2 contains the microprocessor mp, the electrically reprogrammable memory ps, and the second bus interface circuit if2, which is associated with the serial data bus sb in this integrated circuit and also connects the microprocessor mp and the memory ps with one another and with itself. The memory ps holds alignment data and nominal dark-current/white-value data of the picture tube used, which were entered by the manufacturer. From this alignment and nominal data and from the measured data obtained via the second multiplexer mx2 and the analog-to-digital converter ad of the first integrated circuit ic1, the microprocessor mp derives video-signal-independent operating data for the picture tube.
The derivation of these operating data is also outside the scope of the invention; it should only be mentioned that with respect to the operating data of the picture tube, the microprocessor performs a control function in accordance with a predetermined control characteristic.
The third integrated circuit ic3 includes the demultiplexer dx, which is connected to the first multiplexer mx1 of the first integrated circuit ic1 via the chroma bus cb and separates the chrominance signals cs and the operating data of the picture tube from the interleaved signals transferred over the chroma bus. While the transfer of measured data from the analog-to-digital converter ad to the microprocessor mp of the second integrated circuit ic2 takes place via the two interface circuits if1, if2 and the data bus sb at an appropriate instant, the video-signal-independent operating data for the picture tube b, which are derived by the microprocessor mp, are transferred from the second integrated circuit ic2 via the two interface circuits if1, if2 and the line db to the first multiplexer mx1 at an appropriate instant, and from the first multiplexer mx1 over a wire of the chroma bus cb into the shift register sr of the third integrated circuit ic3 shortly after the beginning of the next vertical blanking interval. To accomplish this, the first interface circuit if1 also includes a shift register from which the operating data are read serially.
During this data transfer into the shift register sr, the cathodes of the picture tube b are preferably at the voltage us in order that this data transfer does not become visible on the screen.
The appropriate instant for the transfer of measured data to the microprocessor mp is determined by the latter itself, i.e., depending on the program being executed in the microprocessor, and on the time needed therefor, the measured data are called for from the interface circuits not at the time of measurement but at a selectable instant within the working program of the microprocessor mp. If the measurement currently being performed should not yet be finished at the instant at which the measured data are called for, in a preferred embodiment of the invention, the stored data of the previous measurement will be transferred to the microprocessor mp.
As mentioned previously, the operating data for the picture tube b are transferred into the shift register sr at the beginning of a vertical blanking interval. The parallel outputs of this shift register are combined in groups each assigned to one operating value, and each group has one of the digital-to-analog converters dh, ddr, ddg, ddb, dwr, dwg, dwb associated with it. In the figure, the division of the shift register into groups is indicated by broken lines. The shift register sr performs a serial-to-parallel conversion in the usual manner, and the operating data are entered by the demultiplexer dx into the shift register in serial form and are then available at the parallel outputs of the shift register.
The digital-to-analog converter dh provides the analog brightness control signal, which is applied to the RGB matrix m in the integrated circuit ic3. Also applied to the RGB matrix m are the analog color-difference signals r-y, b-y and the luminance signal y. The formation of these signals is outside the scope of the invention and is known per se from the publications cited at the beginning.
The three analog-to-digital converters ddr, ddg, ddb provide the dark-current-adjusting signals for the three cathodes, which are currents and are applied to the inverting inputs--of the analog amplifiers vr, vg, vb. Also connected to these inputs is a resistor network which is adjustable in steps in response to the digital white-level-adjusting signals at the respective group outputs of the shift register sr. The resistors serve as digital-to-analog converters dwr, dwg, dwb and establish the connection between the inverting inputs--and the outputs of the analog amplifiers vr, vg, vb.
In an arrangement according to the invention which has proved good in practice, each of the three dark-current-adjusting signals is a seven-digit signal, and each of the three white-level-adjusting signals and the brightness control signal are five-digit signals. The voltages us and ud/uw of the three cathodes are assigned a three-digit identification signal in accordance with the above table, which signal is also fed into the shift register sr in the implemented circuit. Finally, a three-digit contrast control signal is provided in the implemented circuit for the Teletext mode of the color-television receiver. These nine data blocks are transferred in the implemented circuit from the demultiplexer dx to the shift register sr in the following order, with the least significant bit transmitted first, and with the specified number of blanks: identification signal, white-level signal blue, three blanks, white-level signal green, three blanks, white-level signal red, one blank, dark-current signal blue, one blank, dark-current signal green, one blank, dark-current signal red, contrast signal Teletext, and brightness control signal. These are seven eight-digit data blocks which are assigned to 56 pulses of a 4.4-MHz clock frequency, which is the frequency of the shift clock signal of the shift register sr.
It should be noted that the data sequence just described does not correspond to the order of the groups of the shift register sr in the figure. The order in the figure was chosen only for the sake of clarity.
The outputs of the three analog amplifiers vr, vg, vb are coupled to the inputs of the video output stage ve, whose outputs, as explained previously, are connected to the bases of the transistors pr, tg, td, so that the cathodes of the picture tube b are driven via the base-emitter paths of these transistors.
In another preferred embodiment of the invention, the measurement performed during a vertical blanking interval is not enabled until the data of the previous measurement has been transferred into the microprocessor mp. In this manner, no measurement will be left out.
It is also possible to omit the digital-to-analog converter dh if the analog RGB matrix m is replaced with a digital one.
One advantage of the invention is that the use of the chroma bus for the transfer of operating data facilitates the implementation of the third integrated circuit ic3 using bipolar technology, because an additional bus interface circuit, which could be used there, would occupy too much chip area.

SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 Color-television receiver having integrated circuit for the luminance signal and the chrominance signals:

VIDEO CODEC UNIT (VCU).



The invention permits an n bit resolution to be achieved with an n-1 bit converter. In a color television receiver the analog-to-digital converter is a parallel analog-to-digital converter with p=2r -1 differential amplifiers as comparators, where r is the number of binary digits of the output signal of the analog-to-digital converter minus one. The composite color signal is then applied as the input signal to the noninverting (or inverting) inputs of all p differential amplifiers and the inverting (noninverting) inputs of the differential amplifiers being connected successively to the taps of a resistive voltage divider which contains equal-value resistors and is fed with a reference voltage (Ur).
For the duration of every second line, either the reference voltage or the input signal is shifted by ΔU=0.5 Ur/2r.
1. A color-television receiver comprising at least one integrated circuit for separating and conditioning the luminance signal and the chrominance signals from the composite color signal, said integrated circuit containing:
a chrominance-subcarrier oscillator,
a chrominance-subcarrier band-pass filter,
a synchronous demodulator,
a PAL switch,
a color matrix, and, if necessary,
an R--G--B matrix, and being characterized by the following subcircuits for conditioning digital signals:
the chrominance-subcarrier oscillator is a squarewave clock generator providing four clock signals the first of which has four times the chrominance-subcarrier frequency and the second to fourth of which have the chrominance-subcarrier frequency, with the first and second clock signals having a pulse duty factor of 0.5, and the third and fourth clock signals each consisting of two consecutive, T/2-long pulses separated by T/2 within each 4T-long period (T=period of the first clock signal);
an analog-to-digital converter clocked by the first clock signal, whose analog input is presented with the composite color signal, and which forms as its output signal a parallel binary word from the amplitude of the composite color signal (F) at the instants the respective amplitudes of the undemodulated chrominance signal are equal to the amplitudes of the respective color-difference signal;
a first binary arithmetic stage which multiplies the output signal of the analog-to-digital converter by a binary overall-contrast control signal;
a two-stage delay line which delays the output signal of the first binary arithmetic stage by T/2;
a second binary arithmetic stage which forms the arithmetic mean of the delayed and undelayed output signals of the first binary arithmetic stage;
a third binary arithmetic stage which subtracts the output signal of the second binary arithmetic stage from the output signal of the first delay stage;
a buffer-memory arrangement which temporarily stores the output signal of the third binary arithmetic stage, and whose enable input is fed with the third clock signal;
a shift-register arrangement consisting of n parallel shift registers (n=number of bits at the output of the third binary arithmetic stage) each of which provides a delay of one line period and whose serial inputs are connected to the parallel outputs of the buffer-memory arrangement, while their clock inputs are fed with the fourth clock signal;
a fourth binary arithmetic stage which forms the arithmetic mean of the input and output signals of the shift-register arrangement;
a fifth binary arithmetic stage which subtracts the input signal of the shift-register arrangement from the output signal of this arrangement and then divides the difference by two;
a sixth binary arithmetic stage which, controlled by the PAL switch, either leaves the output signal of the fifth binary arithmetic stage unchanged or forms its absolute value;
a seventh binary arithmetic stage which forms the green color-difference signal from the output signals of the fourth and sixth binary arithmetic stages;
the outputs of the second, fourth, sixth and seventh binary arithmetic stages are connected to the binary R-G-B matrix each of whose outputs is coupled to one of three digital-to-analog converters for deriving the analog signals for controlling the R-G-B values of the picture tube, or
the outputs of the second, fourth, sixth and seventh binary arithmetic stages are each connected to one of four digital-to-analog converters for deriving the analog signals for controlling the color-difference value of the picture tube;
the improvement wherein
the analog-to-digital converter is a parallel analog-to-digital converter with p=2r -1 differential amplifiers as comparators, where r is the number of binary digits of the output signal of the analog-to-digital converter minus one, the composite color signal being applied as the input signal to one of the noninverting or inverting inputs of all p differential amplifiers and the other of the inverting or noninverting inputs of the differential amplifiers being connected successively to the taps of a resistive voltage divider which contains equal-value resistors and is fed with a reference voltage (Ur), and
for the duration of every second line, either the reference voltage (Ur) or the input signal (F) is shifted by ΔU=0.5 Ur/2r.

Description:
FIELD OF THE INVENTION
Color-television receivers comprising at least one integrated circuit for separating and conditioning the luminance signal and the chrominance signals from the composite color signal are known in the art. The particular color-television receiver of such a known type comprises at least one integrated circuit for separating and conditioning the luminance signal and the chrominance signals from the composite color signal. This integrated circuit contains a chrominance-subcarrier oscillator, a chrominance-subcarrier band-pass filter, a synchronous demodulator, a PAL switch, a color matrix, and, if necessary, an R-G-B matrix. Additionally, such a color-television receiver contains the following subcircuits for conditioning digital signals; (1) the chrominance-subcarrier oscillator is a square-wave clock generator providing four clock signals the first of which has four times the chrominance-subcarrier frequency and the second to fourth of which have the chrominance-subcarrier frequency, with the first and second clock signals having a pulse duty factor of 0.5, and the third and fourth clock signals each consisting of two consecutive, T/2-long pulses separated by T/2 within each 4T-long period (T=period of the first clock signal); (2) an analog-to-digital converter clocked by the first clock signal, whose analog input is presented with the composite color signal, and which forms as its output signal a parallel binary word from the amplitude of the composite color signal (F) at the instants the respective amplitudes of the undemodulated chrominance signal are equal to the amplitudes of the respective color-difference signal; (3) a first binary arithmetic stage which multiplies the output signal of the analog-to-digital converter by a binary overall-contrast control signal; (4) a two stage delay line which delays the output signal of the first binary arithmetic stage by T/2; (5) a second binary arithmetic stage which forms the arithmetic means of the delayed and undelayed output signals of the first binary arithmetic stage; (6) a third binary arithmetic stage, which subtracts the output signal of the second binary arithmetic stage from the output signal of the first delay stage; (7) a buffer-memory arrangement which temporarily stores the output signal of the third binary arithmetic stage, and whose enable input is fed with the third clock signal; (8) a shift-register arrangement consisting of n parallel shift registers (n=number of bits at the output of the third binary arithmetic stage) each of which provides a delay of one line period and whose serial inputs are connected to the parallel outputs of the buffer-memory arrangement, while their clock inputs are fed with the fourth clock signal; (9) a fourth binary arithmetic stage which forms the arithmetic mean of the input and output signals of the shift-register arrangement; (10) a fifth binary arithmetic stage which subtracts the input signal of the shift-register arrangement from the output signal of this arrangement and then divides the difference by two; (11) a sixth binary arithmetic stage which, controlled by the PAL switch, either leaves the output signal of the fifth binary arithmetic stage unchanged or forms its absolute value; (12) a seventh binary arithmetic stage which forms the green color-difference signal from the output signals of the fourth and sixth binary arithmetic stages; (13) the outputs of the second, fourth, sixth and seventh binary arithmetic stages are connected to the binary R-G-B matrix each of whose outputs is coupled to one of three digital-to-analog converters for deriving the analog signals for controlling the R-G-B values of the picture tube, or (14) the outputs of the second, fourth, sixth and seventh binary arithmetic stages are each connected to one of four digital-to-analog converters for deriving the analog signals for controlling the color-difference values of the picture tube. An essential feature of such a receiver is the use of an analog-to-digital converter whose analog input is presented with the composite color signal and which is clocked by a clock signal at four times the chrominance-subcarrier frequency, so that a parallel binary word is obtained from the amplitudes of the composite color signal at the instants the respective amplitudes of the undemodulated chrominance signal are equal to the amplitudes of the respective color-difference signal.
Thus, because of the high frequencies to be be processed, a parallel analog-to-digital converter is needed. Such fast parallel analog-to-digital converters are well known (cf. D. F. Hoeschele, "Analog-to-Digital/Digital-to-Analog Conversion Techniques", New York, 1968, p. 10) and contain 2 s -1 differential amplifiers as comparators, where s is the number of binary digits of the digital converter output signal. The noninverting (or inverting) inputs of all differential amplifiers are presented with the composite color signal, while the inverting (or noninverting) inputs are connected successively to the taps of a resistive voltage divider inserted between a constant reference voltage and ground and consisting of 2 s or 2 s -1 equal-value resistors.
A 6-bit parallel analog-to-digital converter thus has 63 comparators and 63 resistors. A 7-bit converter has 127 comparators and resistors, and an 8-bit converter even has 255 comparators and resistors. It is readily apparent that as the number of digits increases, the implementation of such converters using integrated circuit techniques quickly becomes uneconomical. In particular, a reduction by one digit would result in the component count being halved.
SUMMARY OF THE INVENTION
Accordingly, the object of the invention is to reduce the number of comparators and resistors in an arrangement as set forth hereinbefore to one half without adversely affecting the digital resolution. In other words, the invention is to permit a 6-bit resolution, for example, to be achieved with a 5-bit converter. This is done by using the means set forth above recourse being had to the principle described in the above-cited book on pp. 413 to 415 as follows: In color-television receiver described above, the analog-to-digital converter is a parallel analog-to-digital converter with p=2 r -1 differential amplifiers as comparators, where r is the number of binary digits of the output signal of the analog-to-digital converter minus one. The composite color signal is then applied as the input signal to the noninverting (or inverting) inputs of all p differential amplifiers and the inverting (noninverting) inputs of the differential amplifiers being connected successively to the taps of a resistive voltage divider which contains equal-value resistors and is fed with a reference voltage (Ur). For the duration of every second line, either the reference voltage or the input signal is shifted by ΔU=0.5 Ur/2 r .

BRIEF DESCRIPTION OF THE DRAWINGS
The invention will now be explained in more detail with reference to the accompanying drawings, in which:
FIG. 1 shows the block diagram of a color-television receiver of a known type.
FIGS. 2a-h, k, l, and p-t show various waveforms occurring in the arrangement of FIG. 1, and, in tabular form, signals occurring at given points of the circuit at given times, and
FIG. 3 is a block diagram of a preferred embodiment of the invention.
DESCRIPTION OF THE BEST MODE
At the outset, FIG. 1, will be explained to permit a better understanding of the invention.
In the block diagrams shown in FIGS. 1 to 3, like parts are designated by like reference characters. In addition to interconnections indicated by solid lines as is usual in circuit diagrams, these figures contain interconnections indicated by stripes. These stripes mark connections between digital parallel outputs of the delivering portion of the circuit and digital parallel inputs of the receiving portion. The interconnections indicated by stripes, therefore, consist of at least as many wires as there are bits in the binary word to be transferred. Thus, the signals transferred over the lines indicated by stripes in FIGS. 1 to 3 are all binary signals whose instantaneous binary value corresponds to the instantaneous analog value of the composite color signal and of other signals.
Like in conventional color-television receivers, the composite color signal F, derived in the usual manner controls the chrominance-subcarrier oscillator, which, according to the invention, is designed as a squarewave clock generator 1. By means of the so-called burst contained in the composite color signal F, the clock generator 1 is synchronized to the transmitted chrominance-subcarrier frequency. The clock generator 1 generates the clock signal F1, whose frequency is four times the chrominance-subcarrier frequency, i.e. about 17.73 MHz (precisely 17.734475 MHz) in the case of the CCIR standard.
The clock generator 1 also generates the square-wave clock signal F2 having the frequency of the chrominance subcarrier. The first and second clock signals F1, F2 have a pulse duty factor of 0.5 (cf. FIGS. 2a and 2b). In addition, the clock generator 1 generates the third clock signal F3 and the fourth clock signal F4, each of which consists of two consecutive, T/2-long pulses separated by T/2 within each 4T-long period, where T is the period of the first clock signal F1. The third and fourth clock signals F3, F4 are shown in FIGS. 2b and 2g.
The individual clock signals are generated within the clock generator 1 in the usual manner using conventional digital techniques. The clock signal F1, for instance, may be generated by means of a suitable 17.73--MHz crystal, and the clock signals F2, F3, F4 may be derived therefrom by frequency division and suitable elimination of pulses. Like in conventional color-television receivers, the clock generator 1 is also fed with a pulse Z from the horizontal output stage during which the clock generator 1 is sychronized by the burst.
The composite color signal F is also applied to the analog input of the analog-to-digital converter 2, which is clocked by the first clock signal F1 and, (at the beginning of each pulse of the first clock signal F1) forms from the amplitude of this pulse a parallel binary word and delivers it as an output signal. These leading edges of the pulses of the first clock signal F1 thus occur at the instants the respective amplitudes of the undemodulated chrominance signal contained in the composite color signal are equal to the amplitudes of the respective color-difference signal.
These parallel binary words then remain unchanged for the respective period T of the first clock signal F1, i.e., they are held like in a sample-and-hold circuit. The signals appearing at the output of the analog-to-digital converter 2 are given in tabular form in FIG. 2c, where the vertical lines symbolize the respective clock periods of the first clock signal F1. The letter c of FIG. 2 is also shown in FIG. 1 (encircled).
According to FIG. 2c, successive signals Y+V, Y-U, Y-V, and Y+U are obtained in a line m during one period of the second clock signal F2, where U, V and Y have the formal meanings given in the above-mentioned book, namely U=B-Y, V=R-Y, B=blue chrominance signal, R=red chrominance signal, and Y=luminance signal, but designate here the corresponding digitized signals, i.e., the corresponding binary words. The second line in the Table of FIG. 2c gives the corresponding binary signals in the line m+1, namely the signals Y-V, Y-U and Y+U, occurring during that period of the clock signal F2 which is under consideration.
This output signal of the analog-to-digital converter 2 is applied to one of the two inputs of the first binary arithmetic stage 10, which multiplies this output signal by a binary overall-contrast control signal GK. This overall contrast control signal thus corresponds to the analog overall-contrast control signal present in conventional color-television receivers. In present day color-television receivers, the binary overall contrast control signal GK, just as the binary color-saturation control signal FK and the binary brightness control signal H to be explained below, is available in digital form, because remote-control units and digital controls are usually present which provide these signals.
An advantage of the present application is, therefore, seen in the fact that these signals need no longer be conditioned in analog form in their place of action.
The output signal of the first binary arithmetic stage 10 is fed to the second binary arithmetic stage 20 and to the two-stage delay line 3, which delays this output signal by T/2. The second binary arithmetic stage 20 forms the arithmetic mean of the delayed and undelayed signals. The underlying idea is that if a sinusoidal signal, namely the chrominance subcarrier, is sampled at double frequency, the mean of two successive sample values will always be zero. Thus, by forming the arithmetic means in the second binary arithmetic stage 20, the chrominance subcarrier is suppressed and the luminance signal Y is obtained in digital form.
The output signal of the first binary arithmetic stage 10, delayed in the first stage 31 of the delay line 3 by half the delay provided by this stage, i.e., by T/4, and the output signal of the second binary arithmetic stage 20 are then fed to the third binary arithmetic stage 30, which subtracts the latter signal, i.e., the Y signal, from the former signal. As a result, the output of the third binary arithmetic stage 30 provides the color-difference signal, made up of the successive components B-Y, R-Y, -(B-Y) and -(R-Y), as shown in FIG. 2d in tabular form for the lines m and m+1.
These signals are fed to the buffer-memory arrangement 4, whose enable input is fed with the third clock signal F3, which is shown in FIG. 2e. This buffer memory operates in such a manner that the binary word fed to the input at the beginning of each pulse of the third clock signal F3 appears at the output when the next clock pulse occurs. Thus, the instantaneous output signals given in FIG. 2f in tabular form for the lines m and m+1 are obtained. The individual stages of the buffer-memory arrangement may be so-called D flip-flops, for example.
The output signal of the buffer-memory arrangement 4 is applied to the shift-register arrangement 5, which consists of n parallel shift registers, where n is the number of bits at the ouput of the third binary arithmetic stage 30. The delay provided by the n parallel shift registers is equal to the duration of one line, i.e., 64 μs in the case of PAL television sets. The clock inputs of the n parallel shift registers are fed with the fourth clock signal F4, which is shown in FIG. 2g. The output signal of the shift-register arrangement is given in tabular form in FIG. 2h for the lines m and m+1.
This output signal, together with the input signal of the shift-register arrangement 5 is fed to the fourth binary arithmetic stage 40, which forms the arithmetic means of the two signals, so that its output provides the signal B-Y in digital form, which is given in tabular form in FIG. 2k. The input and output signals of the shift-register arrangement 5 are also fed to the fifth binary arithmetic stage 50, which subtracts the input signal from the output signal and divides the difference by two. By the division, a sort of averaging is performed as well.
The output signal of the fifth binary arithmetic stage 50 is given in tabular form in FIG. 21, again for the lines m and m+1. This output signal is fed to the sixth binary arithmetic stage 60, which, in response to the output signal of the PAL switch 12, leaves it unchanged in one line and forms its absolute value in the other. "To form the absolute value" is used here first of all in the mathematical sense i.e., the negative sign of a negative number is suppressed and only the positive value of this negative number is taken into account. Within the scope of the present invention, however, "absolute value" also means "value with respect to a constant number". By this it is meant that for a number A below the constant X, the "absolute value with respect to X" is 2X-A. Thus, for the number 30, the "absolute value with respect to 50" is 70. The output of the sixth binary arithmetic stage 60 thus provides the PAL compensated signal R-Y in digital form, i.e., the red color-difference signal, which is given in tabular form in FIG. 2p for the lines m and m+1.
The output signals of the fourth binary arithmetic stage 40 and of the sixth binary arithmetic stage 60 are fed to the seventh binary arithmetic stage 70, which forms the green color-difference signal G-Y by the well-known formula Y=0.3R+0.59G+0.11B.
The subcircuits 5, 40, 50, 60 and 70, together with the PAL switch 12, represent the portion for correcting the phase of the received signal by the PAL method.
The output signals of the second, fourth, sixth and seventh binary arithmetic stages 20, 40, 60, 70, i.e., the luminance signal Y and the color-difference signals B-Y, R-Y, and G-Y, are then fed to the binary R-G-B matrix 6, which forms therefrom the binary chrominance signals R, G, B by the above formula. Each of these binary chrominance signals is then fed to one of the three digital-to-analog converters 7, 8, 9, which convert the binary chrominance signals to the analog chrominance signals R', G', B' necessary for R-G-B control of the picture tube.
In the embodiment of FIG. 1, each of thes digital-to-analog converters is also fed with the color-saturation control signal FK and the brightness control signal H, both in binary form. The PAL switch 12 is fed with the second clock signal F2, i.e., a signal having the chrominance-subcarrier frequency locked to the burst, with the composite color signal F, and with the reference pulse Z from the horizontal output stage.
FIG. 3 shows the block diagram of an embodiment of the invention. The analog-to-digital converter 2 is designed as a parallel analog-to-digital converter 2' and contains the differential amplifiers D1, D2, D3, Dp-1, Dp which are used as comparators, the resistors R1, R2, R3, Rp-1, Rp, RO, connected in series to form a voltage divider, and the decoder 21, which changes the output signals of the comparators into corresponding binary words. That portion of FIG. 3 located on the right-hand side of the decoder 21 is a greatly simplified representation of the units designated by like reference characters in FIG. 1.
The parallel analog-to-digital converter 2' contains p=2 r -1 differential amplifiers and a corresponding number of resistors, where r is the number of binary digits of the output signal of the analog-to-digital converter 2 of FIG. 1 minus one. If the analog-to-digital converter is to provide 8 bits, for example, then r is 7. The resistors R2 to Rp are alike and have a value of R, while the resistors RO, R1 have a value of 0.5 R.
According to the invention, the reference voltage applied to the comparators, in the embodiment of FIG. 3 to all inverting inputs, is shifted by ΔU=0.5 Ur/2 r during every second line as electronic switches S1 and S2 in parallel with resistors R1 and RO, respectively, are opened and closed alternately. Their control signal comes from one of the outputs Q, Q of the binary divider BT, which is fed with the horizontal synchronizing or horizontal flyback pulses Z.
Instead of shifting the reference voltage Ur as described, the amount of change ΔU may be added to the composite color signal in an analog adding stage during every second line. The reference voltage UR then remains constant.
By influencing the reference voltage Ur during every second line, and with the fourth or fifth binary arithmetic stage 40, 50 and the shift-register arrangement 5, which acts as a delay stage providing a delay of exactly one line period, the intended effect is produced, i.e., the number of comparators required is reduced to one half, while the resolution corresponds to that achieved with an additional binary digit since the average of the signals of two successive lines is taken at the output of the fourth or fifth binary arithmetic stage 40,50.
The principle explained with the aid of FIG. 3 can also be applied to the luminance channel if a comb filter and a delay arrangement providing a delay of one line period are provided in this channel.

SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 Digital integrated chrominance-channel circuit with gain control:

(Pal) Video Processing Unit (VPU - PVPU)

An improved digital integrated chrominance-channel circuit having gain control for color-television receivers includes at least one integrated circuit for digitally processing the composite color signal. The circuit includes a first limiter inserted between a parallel multiplier and a burst-amplitude-measuring stage, and a control stage including a parallel subtracter whose minuend input is fed with a reference signal, and whose subtrahend input is connected to the output of the burst-amplitude-measuring stage. A digital accumulator whose enable input is presented with a signal derived from the trailing edge of a burst gating signal is used as an integrator.

1. A digital integrated chrominance-channel circuit with gain control for color-television receivers, comprising:
at least one integrated circuit for digitally processing the composite color signal, wherein a digital chrominance signal appearing at an output of a digital chroma filter is applied to a first input of a parallel multiplier, and a digital gain control signal is applied to a second input of the parallel multiplier, the output of the parallel multiplier is connected to an input of a digital chroma demodulator with a color killer stage and to an input of a burst-amplitude-measuring stage whose output signal is compared with a reference signal in a control stage, the output signal of the control stage passes through an integrator whose output signal is the gain control signal;
a square-wave clock generator used as a chrominance subcarrier oscillator generates at least a first clock signal, whose frequency is four times that of the chrominance subcarrier, and a second clock signal, whose frequency is equal to that of the chrominance subcarrier; and
a first limiter is inserted between the parallel multiplier and the burst-amplitude-measuring stage, the control stage is a parallel subtracter whose minuend input is presented with the reference signal, and whose subtrahend input is connected to the output of the burst-amplitude-measuring stage and the integrator is a digital accumulator whose enable input is fed with a signal derived from the trailing edge of a burst gating signal.
2. A chrominance-channel circuit as claimed in claim 1, wherein the output signal from the first limiter is applied to the input of a first buffer memory and, through a delay element which provides a delay equal to the period of the first clock signal, to the input of a second buffer memory, the second clock signal being applied to the enable inputs of the first and second buffer memories during the burst gating signal, the output signals from the first buffer memory and the second buffer memory are fed, respectively, to a first absolute-value former and a second absolute-value former which have their outputs connected to the first and the second input, respectively, of a first parallel adder, the output of the first parallel adder is connected via a second limiter to the input of a third buffer memory and to the minuend input of a parallel comparator whose minuend-greater-than-subtrahend output is coupled to the enable input of the third buffer memory through the first input-output path of an AND gate whose second input is fed with the second clock signal, and the output of the third buffer memory is coupled to the subtrahend input of the parallel comparator, the output of the third buffer memory is connected to the input of a fourth buffer memory whose output is coupled to the subtrahend input of the parallel subtracter, and whose enable input is fed with a signal derived from the leading edges of horizontal-frequency pulses not coinciding with the burst gating signal, and the clear input of the third buffer memory is fed with a signal derived from the trailing edges of the pulses not coinciding with the burst gating signal. 3. A chrominance-channel circuit as claimed in claim 1, wherein the output signal from the parallel subtracter is applied to the first input of a second parallel adder having its output connected via a third limiter to the input of a fifth buffer memory whose output is coupled to the second input of the second parallel adder, and which has normalizing-data inputs and the enable input of the accumulator. 4. A chrominance-channel circuit as claimed in claim 2, wherein the output signal from the parallel subtracter is applied to the first input of a second parallel adder having its output connected via a third limiter to the input of a fifth buffer memory whose output is coupled to the second input of the second parallel adder, and which has normalizing-data inputs and the enable input of the accumulator. 5. A chrominance-channel circuit as claimed in claim 1, additionally comprising:
a first bus switch having its path from the break-contact input to the output inserted between the output of the chroma filter and the associated input of the parallel multiplier and its make-contact input connected to the input of the chroma filter;
a second bus switch having its path from the break-contact input to the output inserted between the output of the first limiter and the input of the chroma demodulator and its make-contact input connected to the input of the chroma filter;
a first test enable signal and a second test enable signal, which does not overlap the first test enable signal, being applied to the control input of the first bus switch and to the control input of the second bus switch, respectively;
an actuating signal being applied to the input of the color killer stage during the second test enable signal;
a normalizing signal being applied to the enable input of the fifth buffer memory during a third test enable signal; and
in addition to the usual contact pads, there is a contact pad via which the test-result signals of the individual subcircuits are accessible.
6. A chrominance-channel circuit as claimed in claim 2, additionally comprising:
a first bus switch having its path from the break-contact input to the output inserted between the output of the chroma filter and the associated input of the parallel multiplier and its make-contact input connected to the input of the chroma filter;
a second bus switch having its path from the break-contact input to the output inserted between the output of the first limiter and the input of the chroma demodulator and its make-contact input connected to the input of the chroma filter;
a first test enable signal and a second test enable signal, which does not overlap the first test enable signal, being applied to the control input of the first bus switch and to the control input of the second bus switch, respectively;
an actuating signal being applied to the input of the color killer stage during the second test enable signal;
a normalizing signal being applied to the enable input of the fifth buffer memory during a third test enable signal; and
in addition to the usual contact pads, there is a contact pad via which the test-result signals of the individual subcircuits are accessible.
7. A chrominance-channel circuit as claimed in claim 3, additionally comprising:
a first bus switch having its path from the break-contact input to the output inserted between the output of the chroma filter and the associated input of the parallel multiplier and its make-contact input connected to the input of the chroma filter;
a second bus switch having its path from the break-contact input to the output inserted between the output of the first limiter and the input of the chroma demodulator and its make-contact input connected to the input of the chroma filter;
a first test enable signal and a second test enable signal, which does not overlap the first test enable signal, being applied to the control input of the first bus switch and to the control input of the second bus switch, respectively;
an actuating signal being applied to the input of the color killer stage during the second test enable signal;
a normalizing signal being applied to the enable input of the fifth buffer memory during a third test enable signal; and
in addition to the usual contact pads, there is a contact pad via which the test-result signals of the individual subcircuits are accessible.
8. A chrominance-channel circuit as claimed in claim 4, additionally comprising:
a first bus switch having its path from the break-contact input to the output inserted between the output of the chroma filter and the associated input of the parallel multiplier and its make-contact input connected to the input of the chroma filter;
a second bus switch having its path from the break-contact input to the output inserted between the output of the first limiter and the input of the chroma demodulator and its make-contact input connected to the input of the chroma filter;
a first test enable signal and a second test enable signal, which does not overlap the first test enable signal, being applied to the control input of the first bus switch, respectively;
an actuating signal being applied to the input of the color killer stage during the second test enable signal;
a normalizing signal being applied to the enable input of the fifth buffer memory during a third test enable signal; and
in addition to the usual contact pads, there is a contact pad via which the test-result signals of the individual subcircuits are accessible.
9. A method of testing a chrominance-channel circuit as claimed in claim 5, characterized by the following features:
in a first step, the chroma demodulator is tested by applying the second test enable signal to the control input of the second bus switch, the actuating signal to the input of the color killer stage, and a known data sequence to the input of the chroma filter;
in a second step, the parallel multiplier is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, and a known data sequence to the input of the chroma filter;
in further steps, the absolute-value formers the first adder, and the parallel comparator are tested by applying the first test enable signal to the control input of the first bus switch, and known data sequences to the input of the chroma filter, and
in the last step, the accumulator is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing data to the normalizing-data input of the accumulator, a trigger signal to the second limiter, and known data sequences to the minuend input of the parallel sub- tracter.
10. A method of testing a chrominance-channel circuit as claimed in claim 6, characterized by the following features:
in a first step, the chroma demodulator is tested by applying the second test enable signal to the control input of the second bus switch, the actuating signal to the input of the color killer stage, and a known data sequence to the input of the chroma filter;
in a second step, the parallel multiplier is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, and a known data sequence to the input of the chroma filter;
in further steps, the absolute-value formers the first adder, and the parallel comparator are tested by applying the first test enable signal to the control input of the first bus switch, and known data sequences to the input of the chroma filter, and
in the last step, the accumulator is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, a trigger signal to the second limiter, and known data sequences to the minuend input of the parallel subtracter.
11. A method of testing a chrominance-channel circuit as claimed in claim 7, characterized by the following features:
in a first step, the chroma demodulator is tested by applying the second test enable signal to the control input of the second bus switch, the actuating signal to the input of the color killer stage, and a known data sequence to the input of the chroma filter;
in a second step, the parallel multiplier is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, and a known data sequence to the input of the chroma filter;
in further steps, the absolute-value formers the first adder, and the parallel comparator are tested by applying the first test enable signal to the control input of the first bus switch, and known data sequences to the input of the chroma filter, and
in the last step, the accumulator is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, a trigger signal to the second limiter, and known data sequences to the minuend input of the parallel subtracter.
12. A method of testing a chrominance-channel circuit as claimed in claim 8, characterized by the following features:
in a first step, the chroma demodulator is tested by applying the second test enable signal to the control input of the second bus switch, the actuating signal to the input of the color killer stage, and a known data sequence to the input of the chroma filter;
in a second step, the parallel multiplier is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, and a known data sequence to the input of the chroma filter;
in further steps, the absolute-value formers the first adder, and the parallel comparator are tested by applying the first test enable signal to the control input of the first bus switch, and known data sequences to the input of the chroma filter, and
in the last step, the accumulator is tested by applying the first test enable signal to the control input of the first bus switch, the third test enable signal and the normalizing signal to the enable input of the accumulator, the normalizing data to the normalizing-data input of the accumulator, a trigger signal to the second limiter, and known data sequences to the minuend input of the parallel subtracter.

Description:
BACKGROUND OF THE INVENTION
1. Field of the Invention
The present invention relates to a digital integrated chrominance-channel circuit with gain control for color-television receivers containing at least one integrated circuit for digitally processing the composite color signal.
2. Description of the Prior Art
A chrominance-channel circuit is disclosed in the published patent application EP 51075 Al. (U.S. application Ser. No. 311,218, Oct. 11, 1981).
Practical tests of color-television receivers with digital signal processing circuitry have shown that the prior art chrominance-channel circuit still has a few disadvantages. For example, the burst-amplitude-measuring circuit is not yet optimal because it is possible in the prior art arrangement that the burst signals are sampled, i.e., measured, near or at the zero crossing. As these measured values are small, so that the digitized values formed therefrom are small numbers, the measurement error is large.
Another disadvantage of the prior art arrangement is that it has two set points for the gain control, namely a lower and an upper threshold level in the form of corresponding numbers entered into two read-only memories. Finally, the integration of the control signal is implemented with two counters, so that the time constant of this "integrator" is determined only by the clock signals for the counters and by the count lengths of these counters. As to the prior art, reference is also made to the journal "Fernseh- und Kino-Technik", 1981, pages 317 to 323, particularly FIG. 9 on page 321. However, the digital chrominance-channel circuit shown there works on the principle of feed-forward control, while both the invention and the above-mentioned prior art use a feedback control system, so that the arrangement disclosed in that journal lies further away from the present invention, the more so since in that prior art arrangement, the set point is implemented only with the concrete circuit (hardware).
SUMMARY OF THE INVENTION
The invention as claimed eliminates the above disadvantages and, thus, has for its object to improve the prior art digital integrated chrominance-channel circuit with gain control in such a way that error-free burst amplitude measurement is ensured, that a single set point can be generated, and that the integration of the control signal is implemented in optimum fashion. Another object of the invention is to modify the chrominance-channel circuit so that the automatic control system can be opened for measuring purposes.
DESCRIPTION OF THE DRAWINGS
FIG. 1 is a block diagram of the chrominance channel in accordance with the invention.
FIG. 2 is a block diagram of a preferred embodiment of the burst-amplitude-measuring stage and the digital accumulator.
FIG. 3 is a block diagram of another embodiment of the invention with the aforementioned measuring facility.
DESCRIPTION OF THE INVENTION
The block diagram of FIG. 1 includes a digital chroma filter cf, which derives a digital chrominance signal cs from a digitized composite color signal. The digital chrominance signal cs is applied to a first input of a parallel multiplier m, whose second input is fed with a digital gain control signal st. The output of the parallel multiplier m is connected to an input of a first limiter b1, which limits the output signals from the parallel multiplier m to a predetermined value. This can be done by arranging, for example, that at least one of the high-order digits of the output signal from the parallel multiplier is indicated by the interconnecting lead between these two subcircuits in FIG. 1.
In the figures of the accompanying drawing, the lines interconnecting the signal inputs and outputs of the individual subcircuits are shown as stripelike connections (buses), while the solid lines commonly used to indicate interconnections in discrete-component circuits are used for interconnections over which only individual bits or clock and/or noise signals are transferred. The stripelike lines thus interconnect parallel inputs and parallel outputs, i.e., inputs to which complete binary words are applied, which are transferred in parallel into the subcircuit at a given time, and outputs which provide complete binary words.
An output signal bs of the first limiter b1 is applied to the input of a burst-amplitude-measuring stage bm, which has its output coupled to a subtrahend input (-) of a parallel subtracter sb, while its minuend input (+) is fed with the reference signal rs, i.e., the set point. The output of the parallel subtracter sb is connected to the input of a digital accumulator ak, which provides the digital gain control signal st, which is applied to the second input of the parallel multiplier m, as mentioned above. A signal rb derived from the trailing edge of the burst gating signal (keying pulse) is applied to an enable input eu of the accumulator ak.
It is also indicated in FIG. 1 that a square-wave clock generator os, used as a chrominance-subcarrier oscillator, forms part of the invention. It provides at least the first clock signal f1, whose frequency is four times that of the chrominance subcarrier, and a second clock signal f2, having the same frequency as the chrominance subcarrier.
FIG. 2 is a block diagram of a preferred embodiment of the burst-amplitude-measuring stage bm and the digital accumulator ak of FIG. 1. The burst-amplitude-measuring stage in FIG. 2 comprises all subcircuits ahead of the subtrahend input (-) of the parallel subtracter sb, while the accumulator consists of the subcircuits following the output of the parallel subtracter sb.
The output signal bs from the first limiter b1 of FIG. 1 is applied in FIG. 2 to the input of a first buffer memory p1 and, through a delay element v, which provides a delay equal to the period of the first clock signal f1, i.e., to one quarter or 90° of the chrominance-subcarrier frequency, to an input of a second buffer memory p2.
The second clock signal f2 is applied to the enable inputs eu of these two buffer memories p1, p2 during the burst gating signal ki, which is indicated in FIG. 2 by the logical term f2.ki. During the keying pulse ki, whose duration usually equals about 10 periods of the chrominance-subcarrier frequency, a corresponding number of digital values are thus transferred successively from the first limiter b1 into the two buffer memories p1, p2, the values transferred into the second buffer memory p2 differing in phase from those transferred into the first buffer memory p1 by the aforementioned 90°; thus, two zero-crossing values are never evaluated at the same time.
The outputs of the two buffer memories p1, p2 are connected to the inputs of a first absolute-value former bb1 and a second absolute-value former bb2, respectively, whose outputs are coupled to a first and a second input, respectively, of a first adder a1. The absolute-value formers bb1, bb2 provide digital values without the sign of the input value, i.e., without the sign bit, for example. They thus contain a subcircuit which converts negative numbers in one's or two's complement notation into the corresponding positive number, i.e., they include complement reconverters.
The first adder a1 is followed by the second limiter b2, whose limiting action is controlled by at least one of the high-order digits of the first adder a1.
The output signal from the second limiter b2 is applied to the input of a third buffer memory p3 and to a minuend input a of a parallel comparator k, which has its subtrahend input b connected to the output of the third buffer memory p3.
In the present description, the two inputs of the parallel comparator k, too, are referred to as "minuend input" and "subtrahend input", respectively, which is considered justifiable in view of the fact that, purely formally, the arithmetic operation performed by comparators is more closely related to subtraction than to addition by means of an adder, even though the internal circuit of a comparator resembles that of an adder more than that of a subtracter, cf. the corresponding mathematical operations a-b and a b as opposed to a+b.
The minuend-greater-than-subtrahend output a>b of the parallel comparator k is connected to the enable input eu of the third buffer memory p3 via the first input-output path of the AND gate u, while the second clock signal f2 is applied to the second input of the AND gate u. The output of the third buffer memory p3 is also connected to an input of a fourth buffer memory p4, which has its output coupled to the subtrahend input (-) of the parallel subtracter sb. The enable input eu of the fourth buffer memory p4 is presented with a signal vz derived from the trailing edges of horizontal-frequency pulses zf, which, however, do not coincide with the burst gating signal ki, while a signal rz derived from the trailing edges of the horizontal-frequency pulses zf not coinciding with the burst gating signal ki is applied to the clear input el of the third buffer memory p3.
The derivation of the two signals rz, vz from the horizontal-frequency pulses zf is indicated in FIG. 2 by a pulse-shaper stage if. The section consisting of the two buffer memories p3, p4, the parallel comparator k, the AND gate u, and the pulse shaper if determines, for each line of the television picture, the maximum value of the burst amplitude from the--possibly limited--output signal of the first adder a1, and feeds this maximum value to the subtrahend input (-) of the parallel subtracter sb. This is achieved essentially by transferring only those words of the output signal of the second limiter b2 into the third buffer memory p3 which are greater than any word already stored in the third buffer memory p3. This is done line by line during the keying pulse ki.
As mentioned, a preferred embodiment of the accumulator ak of FIG. 1 is shown in the lower portion of FIG. 2. The output signal from the parallel subtracter sb is applied to a first input of a second parallel adder a2, which has its output connected to an input of a fifth buffer memory p5 through the third limiter b3. To realize the adding function, the output of the fifth buffer memory p5 is connected to the second input of the second adder a2. The buffer memory p5 has, in addition to the enable input eu, which is the enable input of the accumulator ak of FIG. 1, the normalizing-data inputs ne, through which normalizing data nd, i.e., known data, can be entered if necessary. The enable input eu is presented with the signal rb derived from the trailing edge of the burst gating signal ki. With the trailing edge of the keying pulse, the output signal from the third limiter b3 is thus transferred into the fifth buffer memory p5 and simultaneously transferred to the output. With the trailing edge of each keying pulse, the sum of the value from the preceding line and the set-point deviation calculated in the measured line by the parallel subtracter sb is thus produced line by line as the control signal st.
Thus, the essential advantages of the invention follow directly from the solution of the problem, namely particularly the line-by-line subtraction of the maximum burst amplitude, which is integrated in the accumulator ak to form the control signal st for the automatic control system, from the reference signal rs.
FIG. 3, a block diagram like FIGS. 1 and 2, shows a preferred embodiment of the invention which makes it possible to test the digital automatic control system after the fabrication of the integrated circuit, and to make the test-result signals accessible. The testing is necessary because the automatic control system contains several subcircuits each of which may be faulty. The test procedure and the design of the overall circuit must therefore be adapted to one another in such a way that all subcircuits of the automatic control system can be tested with little additional circuitry.
To this end, the path from a break-contact input to an output of a first bus switch bu1, whose make-contact input is connected to the input of the chroma filter cf, is interposed between the output of this chroma filter and the associated input of the parallel multiplier m, as shown in the block diagram of FIG. 3. For the graphic representation of the bus switch bu1, the symbol of a mechanical transfer switch has been chosen, with the above mentioned stripelike interconnecting lines, i.e., buses, connected to the signal inputs and the output of the switch. It is thus clear that the bus switch consists of as many individual electronic switches as there are wires in the buses.
Inserted between the output of the first limiter b1 and the input of the chroma demodulator cd, which is also present in FIG. 1, where it "demodulates" the output signal bs of the first limiter b1 into the chroma signal cs, is a path from a break-contact input to an output of a second bus switch bu2, which has its make-contact input am connected to the input of the chroma filter cf. Viewed in the direction of signal flow, the second bus switch bu2 lies behind the junction point where the signal bs for the burst-amplitude-measuring circuit is taken off. What was said on the circuit design and the graphic representation of the first bus switch bu1 applies analogously to the second bus switch bu2.
The first test enable signal t1 and the second test enable signal t2, which does not overlap the first test enable signal t1, are applied to the control input of the first bus switch bu1 and to the control input of the second bus switch bu2, respectively. Thus, when the second bus switch bu2 is in its "make" position, the first bus switch bu2 is in its "break" position, and vice versa.
During the first test enable signal t1, an actuating signal db is applied to the input ec of the color killer stage ck of the chroma demodulator cd, so that the latter is active during the testing of the automatic control system although the circuit is not in its normal mode of operation but only in a test mode.
The enable input eu of the accumulator ak, i.e., the enable input eu of the fifth buffer memory p5 in FIG. 3, may be fed with a normalizing signal ns during the third test enable signal t3. During testing and measurement, instead of the signal rb, derived from the trailing edge of the keying pulse and applied in the normal mode of operation, the normalizing signal ns is applied to the enable input eu of the fifth buffer memory p5 and causes the normalizing data nd to be transferred into this buffer.
In addition to the usual contact pads of the integrated circuit, through part of which the output signal cs of the chroma demodulator cd is coupled out, a contact pad is provided via which test-result signals of individual subcircuits are accessible, i.e., transferred out of the integrated circuit. These test-result signals are advantageously coupled to this additional contact pad through transfer transistors which, in turn, are driven by the above-mentioned test enable signals or corresponding additional signals of this kind or by signals derived by performing simple logic operations on the signals just mentioned. In this manner, only the respective subcircuit to be tested is connected to the additional contact pad.
An advantageous method of testing the chrominance-channel circuit according to the invention consists in the following time sequence of test steps. In the first step, the chroma demodulator cd is tested. This is necessary because, throughout the testing of the chrominance-channel circuit, signals are transferred out through the chroma demodulator cd and must not be falsified by the latter.
This first test step is performed by applying the second test enable signal t2 to the control input of the second bus switch bu2, the actuating signal db to the input ec of the color killer stage ck, and a known data sequence, i.e., a test-data sequence, to the input of the chroma filter cf. The application of the actuating signal db to the input ec of the color killer stage ck is necessary because an actual actuating signal coming from other stages of the chrominance-channel circuit is applied to the color killer only during normal operation of the chrominance-channel circuit, cf. the above-mentioned printed publication EP 0 051 075 Al.
In response to the application of the second test enable signal t2 to the second bus switch bu2, the input signals of the chroma filter cf are transferred directly to the input of the chroma demodulator cd, so that, if a known test-data sequence is used, the performance of the chroma demodulator cd can be checked by means of the output signals.
In the second step, the parallel multiplier m is tested. This is done by applying the first test enable signal t1 to the control input of the first bus switch bu1, the third test enable signal t3 and the normalizing signal ns to the enable input of the accumulator ak, i.e., to the enable input of the fifth buffer memory p5, for example; the normalizing data nd are applied to the normalizing-data input ne of the fifth buffer memory p5, and a known data sequence, i.e., a test-data sequence, is applied to the input of the chroma filter cf.
As in the first test, the first test enable signal t1 causes the test-data sequence to bypass the chroma filter cf, so that the test data are applied directly to one input of the parallel multiplier m. This bypassing of the chroma filter cf is necessary because the chroma filter is generally a dynamic subcircuit, which is not suitable for being included in the individual tests for this reason alone.
As a result of the entry of normalizing data into the accumulator ak or into the fifth buffer memory p5 as a subcircuit of the accumulator, known data are also applied to the second input of the parallel multiplier m, so that the output signal of the latter is predeterminable, which makes it possible to check the correct functioning of the multiplier. Since the chroma demodulator cd was tested already in the first test step, the data appearing at its output during the second test step are the unchanged output data of the parallel multiplier m if the chroma demodulator cd was found to operate correctly.
Further tests may now be performed on the absolute-value formers bb1, bb2, the first adder a1, and the parallel comparator k. To do this, the first test enable signal t1 is applied to the control input of the first bus switch bu1, and known data sequences are applied to the input of the chroma filter cf, the individual test results being accessible via the above-mentioned additional contact pad and being generally present in the form of a go/no-go decision.
The last test to be performed is that of the accumulator ak. To this end, the first test enable signal t1 is applied to the control input of the first bus switch bu1; the third test enable signal t3 and the normalizing signal ns are applied to the enable input of the accumulator ak, i.e., to the corresponding input of the fifth buffer memory p5, for example; a trigger signal is applied to the second limiter b2, and known data sequences are fed to the minuend input (+) of the parallel subtracter sb. With the second limiter sb2 triggered, one of the input signals of the accumulator is predetermined and, thus, known because the output data of the subtracter sb are known as well. The accumulator ak can thus be tested by varying the reference data rs.
The reference data rs, the above-mentioned various test-data sequences, and the normalizing data nd may come from a microprocessor.


SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 Digital horizontal-deflection circuit:

Digital deflection Processor (DPU)

DPU 2553, DPU 2554 Instead of fine-controlling the horizontal deflection signal in a digital television receiver by means of two phase-locked loops and gate-delay stages as is done in prior art arrangements, in the horizontal-deflection circuit according to the invention, a first digital word delivered by a first phase-locked loop and representative of the horizontal frequency is added in an adder to a suitably amplified third digital word delivered by a phase comparator of a second phase-locked loop. The output of the adder is fed to the control input of a digital sine-wave generator which drives a frequency divider. The latter delivers the horizontal deflection signal, which drives the horizontal output stage. The phase comparator is fed with the horizontal flyback signal, which is derived from the horizontal deflection signal, and a second digital word generated by the first phase-locked loop and representative of the desired phase position of the flyback signal.

What is claimed is: 1. A digital horizontal-deflection circuit for generating an analog horizontal deflection signal driving the horizontal output stage of a digital television receiver clocked with a system clock, comprising:
a first digital phase-locked loop which synchronizes the horizontal deflection signal with the horizontal synchronizing signal separated from the composite color signal and delivers for each line of video signal a first digital word representative of the horizontal frequency and a second digital word representative of the desired phase position of the horizontal flyback signal;
a second phase-locked loop which uses a digital phase comparator to generate a third digital word representative of the phase deviation of the horizontal flyback signal from the desired position and shifts the horizontal deflection signal in time so that the horizontal flyback signal takes up the desired phase position;
an adder having a first input to which said first digital word is fed and a second input to which said third digital word is fed via a multiplier serving as an amplifier;
a digital sine-wave generator having a control input to which the output of said adder is fed; and
a frequency divider to which the output of said digital sine-wave generator is supplied, the output of said frequency divider providing the horizontal deflection signal.
2. A horizontal-deflection circuit as defined in claim wherein said first digital word is representative of the period of the horizontal deflection signal, and additionally comprising a digital period-to-frequency converter connected between said first phase-locked loop and said first input of said adder. 3. A horizontal-deflection circuit as defined in claims 1 or 2, additionally comprising a protection circuit coupled between the output of said digital sine-wave generator and the input of said frequency divider, said protection circuit providing a sine-wave signal of a desired frequency if the frequency of said sine-wave generator departs from a desired-value range. 4. A horizontal-deflection circuit as defined in claim 3, wherein said protection circuit is an analog phase-locked loop.

Description:
BACKGROUND OF THE INVENTION
The present invention relates to a digital horizontal-deflection circuit for generating an analog horizontal deflection signal driving the horizontal output stage of a digital television receiver clocked with a system clock. A digital horizontal-deflection circuit of this kind is described in a data book of Intermetall, "DIGIT 2000 VLSI Digital TV System," 1984/5, pages 112 to 114, which deal with the integrated circuit DPU 2500.
In the prior art arrangement, the phase variation which is necessary for the digital generation of the horizontal deflection signal and must be stepped in fractions of the period of the system clock is achieved essentially by the use of gate-delay stages or chains as are described, for example, in the European Patent Applications EP-A Nos. 0,059,802; 0,080,970; and 0,116,669, which essentially utilize the inherent delay of inverters. It turned out, however, that with these arrangements, it is not possible to completely control all operating conditions which may occur.
SUMMARY OF THE INVENTION
It is, therefore, the object of the invention to modify and improve the digital horizontal-deflection circuit described in the above prior art in such a way that the gate-delay stages can be dispensed with.
DETAILED DESCRIPTION OF A PREFERRED EMBODIMENT
The invention will now be explained in more detail with reference to the single FIGURE of the accompanying drawing, which is a block diagram of an embodiment of the invention. The block diagram shows that portion of a digital television receiver, i.e., of a television receiver in which the analog signal received via the antenna is processed digitally, which is of interest in connection with the invention. Thus, all subcircuits for digital-to-analog conversion, sync separation, chrominance-signal and luminance-signal processing or sound-signal processing have been omitted; the overall circuit concept of digital television receivers has been well known for some time.
The first digital phase-locked loop (PLL) p1 is supplied with the (digital) horizontal synchronizing signal hs, which was separated from the composite color signal, and the system clock st, and derives therefrom, in the manner described in the prior art, the first digital word d1, which is representative of the horizontal frequency, and the second digital word d2, which is representative of the desired phase position of the horizontal flyback signal fy. The signal fy comes from the receiver's horizontal output stage ps, which supplies the necessary sawtooth current to the deflection coil 1. The phase position of the flyback signal fy relative to the horizontal deflection signal ps is dependent on the switching properties of the horizontal output stage ps and is also influenced by the video signal applied to the picture tube.
By means of the second PLL p2, indicated in the FIGURE by the large rectangle bounded by a broken line, these dependences are compensated in the manner described in the prior art. The phase comparator pv generates the third digital word d3, which is representative of the phase deviation of the flyback signal fy from its desired position, and the second PLL p2 shifts the horizontal deflection signal ds in time so that the flyback signal fy takes up the desired phase position.
The first digital word d1 is fed to the first input of the adder ad, and the third digital word d3 is fed to the second input of this adder via the multiplier m, which serves as an amplifier. The second input of the multiplier m is fed with the signal k determining the gain of the second PLL p2, so that the transient response of the latter can be optimally adjusted by the manufacturer of the television receiver.
The output of the adder ad is fed to the control input of the digital sine-wave generator s, which may be designed as an accumulator followed by a sine looker table (ROM). If an n-bit word d4 is applied to its control input, this arrangement, which is known in principle, delivers a sine-wave of frequency (d4)fs/2 n , where fs is the frequency of the system clock st.
The output of the digital sine-wave generator sg is fed to the frequency divider ft, which provides the horizontal deflection signal ds, a square-wave signal as usual. The frequency divider ft thus not only divides the frequency of the signal delivered by the sine-wave generator sg, but also converts the sine-wave signal into the above-mentioned square-wave signal; this can be done in a suitable sine-to-square wave converter stage at the input of the frequency divider ft.
Two stages which can be added to the arrangement singly or in combination are indicated in the FIGURE by rectangles bounded by broken lines. The period-to-frequency converter fw between the output of the first PLL pl for the first digital word d1 and the corresponding input of the adder ad is necessary if the first digital word d1, generated by the first PLL p1, represents the period of the horizontal deflection signal ds (if this word represents the frequency of the horizontal deflection signal, the stage fw is not necessary).
Between the output of the digital sine-wave generator sg and the input of the frequency divider ft, the protection circuit sc may be inserted. It is preferably an analog phase-locked loop which provides a sine-wave signal of the desired frequency if the frequency of the sine-wave generator sg departs from a predetermined desired-value range. This may be to advantage during the start-up phase after the turning on of the television receiver or may serve to afford protection in the event of a failure of one or both of the PLL's p1, p2.
In the FIGURE, the stripe-like connecting leads represent signal paths over which digital signals are transferred in parallel, i.e., on these buses, the individual (parallel) digital words follow one after the other at the pulse repetition rate of the system clock st. The fact that the individual stages of the second PLL p2--where necessary and appropriate--and the period-to-frequency converter fw are clocked with the system clock st, too, is indicated by the respective clock input lines.
The digital horizontal-deflection circuit in accordance with the invention is preferably realized using monolithic integrated circuit techniques, particularly MOS technology. It may form part of a larger integrated circuit but can also be implemented as a separate integrated circuit.

Digital circuit for steepening color-signal transitions:
SCHNEIDER  STV707  DTV-2-7025-11 (49474A)  CHASSIS DTV2 .
Digital Transient Improvement Processor (DTI) DTI2223 / DTI2222

This circuit arrangement is designed for use in digital color-television receivers or the like and contains for each of the two digital color-difference signals a slope detector to which both a digital signal defining an amplitude threshold value and a digital signal defining a time threshold value are applied. At least one intermediate value occurring during an edge to be steepened is stored, and at the same time value of the steepened edge, it is "inserted" into the latter. This is done by means of memories switches, output registers, and a sequence controller.

What is claimed is: 1. A circuit arrangement for steepening color-signal transitions, comprising:
first and second circuit branches, said first branch receiving a first color difference digital signal from a first color difference channel and said second branch receiving a second color difference digital signal from a second color difference channel, each of said branches comprising:
a digital slope detector for generating a control signal at an output when the respective one of said first or second color difference digital signals has a predetermined relationship to predetermined amplitude and time thresholds;
a first delay element receiving and delaying said respective one color difference digital signal by a time equal to the delay of said digital slope detector;
at least one memory having its input connected to the output of said first delay element;
a switch having first and second inputs connected to the outputs of said delay element and said at least one memory, respectively; and
an output register having its input connected to the output of said switch;
and
a sequence controller coupled to the outputs of said digital slope detectors in said first and second circuit branches, and receiving a clock signal having a predetermined frequency relationship to a chrominance subcarrier frequency, and receiving a digital signal determining the hold time equal to the known system rise time of said first and second color difference channels, said sequence controller providing sequence control signals for controlling said at least one memory, said switch and said output register in both of said first and second circuit branches such that:
a color difference signal value occurring at an intermediate value of said hold time is read into said memory, said color difference signal value stored in said memory is read via said switch into said output rergister at the corresponding intermediate value of the steepened leading edge of said color-signal, the input of said output register being connected to the output of said delay element at all times except at said intermediate value of said steepened leading edge.
2. A circuit arrangement in accordance with claim 1, wherein each said slope detector comprises:
a first digital differentiator receiving the respective color difference digital signal;
a digital absolute value stage coupled to said first digital differentiator output;
a first digital comparator having a minuend input coupled to said digital absolute value stage output, a subtrahend input supplied with a digital signal corresponding to said amplitude threshold value, and an output;
a second digital differentiator having an input coupled to said comparator output;
a counter for counting pulses of said clock signal, said counter having an enable input coupled to said comparator output, and having a reset input coupled to the output of said second digital differentiator;
a fifth memory having its inputs coupled to the count outputs of said counter and an enable input coupled to said second digital differentiator output;
a second digital comparator having a minuend input coupled to the output of said fifth memory, a subtrahend input supplied with a digital signal corresponding to said time threshold value; and
gate means for combining the output of said comparator and the output of said second digital differentiator to provide said control signal when the output of said comparator and the output of said second digital differentiator are both active.
3. A circuit arrangement in accordance with claim 2,
wherein each of said first and second circuit branches further comprises a second memory having its input connected to said first delay element output, said switch having a third input coupled to said second memory output; and
wherein said sequence controller comprises:
a counter for counting pulses of said clock signal; and
a decoder for decoding the count output of said counter to provide said sequence control signals, said sequence control signals also controlling each said second memory,
said sequence controller operating such that color difference signal values occurring at the end of the first third of said hold time are written into said at least one memory, and color difference signal values occurring at the end of the second third of said hold time are written into said second memory; and
wherein:
in said first circuit branch the contents of said at least one memory and said second memory are written via said switch into said output register at the end of the first third and at the end of the second third, respectively, of said steepened leading edge;
in said second circuit branch the contents of said at least one memory and said second memory are written via said switch into said output register at the end of the first third and the second third, respectively, of said steepened leading edge; and
the input of the respective output register of each of said first and second circuit branches is connected to the output of the respective first delay element at all times except at the end of said first third and said second third or said steepened leading edge.
4. A circuit arrangement in accordance with claim 1,
wherein each of said first and second circuit branches further comprises a second memory having its input connected to said first delay element output, said switch having a third input coupled to said second memory output;
wherein said sequence controller comprises:
a counter for counting pulses of said clock signal; and
a decoder for decoding the count output of said counter to provide said sequence control signals, said sequence control signals also controlling each said second memory,
said sequence controller operating such that color difference signal values occurring at the end of the first third of said hold time are written into said at least one memory, and color difference signal values occurring at the end of the second third of said hold time are written into said second memory; and
wherein:
in said first circuit branch the contents of said at least one memory and said second memory are written via said switch into said output register at the end of the first third and at the end of said second third, respectively, of said steepened leading edge;
in said second circuit branch the contents of said at least one memory and said second memory are written via said switch into said output register at the end of the first third and the second third, respectively, of said steepened leading edge; and
the input of the respective output register of each of said first and second circuit branches is connected to the output of the respective first delay element at all times except at the end of said first third and said second third of said steepened leading edge.

Description:
BACKGROUND OF THE INVENTION
The invention pertains to a circuit for steepening color-signal transitions in color television receivers or the like.
A circuit arrangement of this kind includes a slope detector which, when a predetermined amplitude threshold value is exceeded, delivers a switching signal which causes a substitute signal to appear at the respective output of the two color-difference channels for the duration of the system rise time of said channels. One circuit arrangement of this kind, which provides a chroma transient improvement, is described in a publication by VALVO entitled "Technische Information 840228 (Feb. 28, 1984): Versteilerung von Farbsignalsprungen and Leuchtdichtesignal-Verzogerung mit der Schaltung TDA 4560".
The bandwidth of the color-difference channel is very small compared with the bandwidth of the luminance channel, namely only about 1/5 that of the luminance channel in the television standards now in use. This narrow bandwidth leads to blurred color transitions ("color edging") in case of sudden color-signal changes, e.g., at the edges of the usual color-bar test signal, because, compared with the associated luminance-signal transition, an approximately fivefold duration of the color-signal transition results from the narrow transmission bandwidth.
In the prior circuit arrangement, the relatively slowly rising color-signal edges are steepened by suitably delaying the color-difference signals and the luminance signal and steepening the edges of the color-difference signals at the end of the delay by suitable analog circuits. The color-difference signals and the luminance signal are present and processed in analog form as usual.
The problem to be solved by the invention is to modify the principle of the prior art analog circuits in such a way that it can be used in known color-television receivers with digital signal-processing circuitry (cf. "Electronics", Aug. 11, 1981, pages 97 to 103), with the slope detector responding not only to one criterion, namely a predeterminable amplitude threshold value as in the prior art arrangement, but to an additional criterion.
SUMMARY OF THE INVENTION
In accordance with the invention a circuit arrangement provides a fully digital solution for chroma transient improvement. The circuit arrangement contains a slope detector, a memory, a switch-over switch and a timing control stage for the processing of each color difference signal. A time period threshold signal and an amplitude threshold signal are fed to the slope detector. If the amplitude threshold is exceeded and the time threshold is not being reached, the slope is improved.
This circuit arrangement is designed for use in digital color-television receivers or the like and contains for each of the two digital color-difference signals a slope detector to which both a digital signal defining an amplitude threshold value and a digital signal defining a time threshold value are applied. At least one intermediate value occurring during an edge to be steepened is stored, and at the same time value of the steepened edge, it is "inserted" into the latter. This is done by means of memories, switches, output registers, and a sequence controller.

BRIEF DESCRIPTION OF THE DRAWING
The invention will be better understood from a reading of the following detailed description in conjunction with the drawing in which:
FIG. 1 is a block diagram of a first embodiment of the invention;
FIG. 2 is a block diagram of a second form of the arrangement of FIG. 1;
FIG. 3 is a block diagram of an embodiment of the slope detectors of FIGS. 1 and 2;
FIGS. 4a-c shows various waveforms to explain the basic operation of the invention; and
FIGS. 5a and 5b shows waveforms to explain the operation of the improved arrangement of FIG. 2.
DETAILED DESCRIPTION
In the block diagram of FIG. 1, the digital color-difference signals yr, yb are present in the baseband at the frequency of the clock signal f, which is four times the chrominance-subcarrier frequency, i.e., the individual data words appear one after the other at this frequency. If a subharmonic of the clock signal f, i.e., the chrominance-subcarrier frequency itself, for example, is chosen for the color-difference-signal demodulation as may be the case in known digital color-television receivers, these digital signals must be brought to the aforementioned repetition frequency of the clock signal f by digital interpolation.
In FIG. 1, there are two branches for the two color-difference signal yr and yb, respectively. They are of the same design, with the branch z1 assigned to the red-minus-luminance channel, and the branch z2 to the blue-minus-luminance channel. In the branch z1, the red-minus-luminance signal yr is applied to the inputs of the first delay element v1 and the first digital slope detector fs1. The output of the first delay element v1 is fed to the input of the first memory s1 and to one of the inputs of the first switch us1, whereas the output of the first memory s1 is connected to the other input of the first switch us1, whose output is coupled to the input of the first output register r1.
The second branch z2, to which the blue-minus-luminance signals yb are applied, is of the same design as the first branch z1 as far as the individual circuits and their interconnections are concerned, and contains the second digital slope detector fs2, the second delay element v2, the second memory s2, the second switch us2, and the second output register r2.
The output signals of the two slope detectors fs1, fs2 are applied, respectively, to the first and second inputs of the OR gate og, whose output is connected to the first input of the sequence controller ab. The second input of the latter is presented with the clock signal f, and the third input with the digital signal hz, by which the hold time equal to the system rise time of the color-difference channels can be preset. The outputs of the sequence controller ab are connected to the enable inputs en of the first and second memories s1, s2 and of the first and second output registers r1, r2 and to the control inputs of the two switches us1, us2.
The sequence controller ab controls these subcircuits as follows. A red-minus-luminance signal value yr1 and a blue-minus-luminance signal value yb1 occurring at an intermediate value of the hold time are read into the memories s1 and s2, respectively. This intermediate value of the hold time lies preferably in the middle of the hold time. Furthermore, the sequence controller causes the contents of the memories s1 and s2 to be transferred via the associated switches us1 and us2 into the associated output registers r1 and r2, respectively, at the corresponding intermediate value, preferably one-half, of the steepened leading edge, while at all times other than the instant of the intermediate value of the steepened leading edge, the inputs of the associated output registers are connected to the outputs of the delay elements v1 and v2, respectively.
The block diagram of FIG. 2 shows an improved version of the arrangement of FIG. 1. The improvement is that the first and second memories s1 and s2 of FIG. 1 have been supplemented with the third and fourth memories s3 and s4, respectively, each of which is connected in parallel with the associated memory, and that the two switches us1 and us2 of FIG. 1 have been expanded into multiposition switches us1' and us2' each having one additional input connected to the output of the third memory s3 and the output of the fourth memory s4, respectively.
This improved portion of FIG. 2 concerns the sequence controller ab of FIG. 1. In FIG. 2, the latter consists of the counter c2, which counts the pulses of the clock signal s, the decoder dc, and the AND gate u2. The start input st of the counter c2 is connected to the output of the OR gate og, whereas the stop input sp is controlled by the decoder dc. The digital signal hz is fed to the decoder dc, cf. FIG. 1.
The counts of the counter c2 are decoded by reading the red- and blue-minus-luminance signal values occurring at the end of the first third of the hold time, i.e., the values yr1' and yb1', into the first memory s1 and the second memory s2, respectively, and the red- and blue-minus-luminance signal values occurring at the end of the second third of the hold time, i.e., the values yr2 and yb2, into the third memory s3 and the fourth memory s4, respectively. At the end of the first third and second third, respectively, of the steepened leading edge, the contents of the memories s1 and s3, respectively, are transferred through the switch us1' into the output register r1, and at the end of the first third and second third, respectively of that edge, the contents of the memories s2 and s4, respectively, are transferred through the switch us2' into the output register r2. The inputs of the two outputs registers are connected to the outputs of the first and second delay elements v1 and v2, respectively, except at the end of the first and second thirds, respectively, of the steepened leading edge.
The clock signal f is applied to one of the inputs of the AND gate u2, whose other input is connected to one of the outputs of the decoder dc, and whose output is coupled to the enable inputs en of the first and second output registers r1, r2.
The block diagram of FIG. 3 shows a preferred embodiment of the circuit of the slope detectors fs1, fs2. The input for the color-difference signal yr, yb is followed by the series combination of the first digital differentiator d1, the digital absolute-value stage bb, and the minuend input m of the first digital comparator k1. The subtrahend input s of the latter is presented with the digital signal corresponding to the amplitude threshold value, the signal ta.
The absolute-value stage bb delivers digital values which are unsigned, i.e., which have no sign bit, for example.
Accordingly, the absolute-value stage bb contains a subcircuit which changes negative binary numbers in, e.g., one's or two's complement representation into the corresponding positive binary number, i.e., a recomplementer.
The term "comparator" as used herein means a digital circuit which compares the two digital signals appearing at the two inputs to determine which of the two signals is greater. Since, purely formally, such a comparison is closer to the arithmetic operation of subtraction than to that of addition although the concrete internal circuitry of such comparators is more similar to that of adders than to that of subtracters, the two inputs of the comparator are called "minuend input" and "subtrahend input" as in the case of a subtracter. The three logic output signals are "minuend greater than subtrahend", "subtrahend greater than minuend", and "minuend equal to subtrahend". Thus, in positive logic, the more positive logic level will appear at the minuend-greater-than-subtrahend output of a comparator if and as long as the minuend is greater than the subtrahend. If needed, the more negative logic level appearing at this output may serve to signal the "minuend-smaller-than-subtrahend" function, i.e., it is also possible to use negative logic.
In the slope detector of FIG. 3, the enable input eb of the first clock-pulse counter c1 and one of the inputs of the second digital differentiator d2 are connected to the minuend-greater-than-subtrahend output ms of the first comparator k1. The count outputs of the first counter c1 are coupled to the input of the fifth memory s5, which has its output connected to the minuend input m of the second digital comparator k2. The subtrahend input s of the latter is presented with a digital signal corresponding to the time threshold value, the signal tt.
The reset input re of the first counter c1, the enable input en of the fifth memory s5, and the first input of the first AND gate u1 are connected to the output of the second differentiator d2. The subtrahend-greater-than-minuend output sm of the second comparator k2 is connected to the second input of the second AND gate u2, whose output is fed to the OR gate of FIGS. 1 or 2. The subcircuits d1, bb, k1, d2, and, as mentioned above, c1 are clocked by the clock signal f.
FIGS. 4a-c and 5a and b serve to illustrate the operation of the circuit arrangement in accordance with the invention. FIG. 4a shows the assumed shape of one of the two color-difference signals yr, yb; it should be noted that, in those figures, the representation commonly used for analog signals has been chosen for simplicity.
FIG. 4b shows the output signal of the absolute-value stage bb and the amplitude threshold value corresponding to the digital signal ta. Also shown is the time threshold value corresponding to the digital signal tt. FIG. 4c shows the shape of the assumed color-difference signal of FIG. 4a as it appears at the output of the output register r1, r2 of FIG. 1 or FIG. 2. A comparison between FIGS. 4a and 4c shows that the last edge on the right has been steepened since, during this edge, both the amplitude threshold value is exceeded and the time threshold value is not reached (cf. the use of the subtrahend-greater-than-minuend output sm of the second comparator k2), the steepening function becomes effective. The first comparator k1 provides a signal at the minuend-greater-than-subtrahend output ms as long as the output signal of the absolute-value stage bb is greater than the amplitude threshold value. During that time, the first counter c1 can count the clock pulses until it is reset by a signal derived by the second differentiator d2 from the trailing edge of the output signal of the first comparator k1. The previous count of the counter c1 is transferred into the fifth memory s5 and compared with the time threshold value by the second comparator k2. If the time threshold value is greater than the period measured by the counter c1, the above-mentioned function will be initiated.
FIGS. 5a and 5b serve to explain how the steepened edge is formed. Curve a of FIG. 5a shows a slowly rising edge used for the explanation. The distances between the points in curves a and b of FIG. 5a are to illustrate the period of the clock signal f. FIG. 5b shows the waveform at the enable inputs en of the output registers r1, r2. At the arrow shown on the left between curves a and b of FIG. 5a, the signal periodically applied to these inputs at the repetition rate of the clock signal f is stopped, so to speak, so that no signals are transferred to the output registers r1, r2 over several clock periods, but the signal read in at the "clocking" of the enable inputs en is retained in those registers. After the "clocking" of the enable inputs of the output registers r1, r2 has resumed at the beginning of the edge to be steepened, the signal values yr1', yb1' and yr2, yb2 read into the memories s1, s2 and s3, s4 at the end of the first third and the second third, respectively, of the slowly rising edge of curve a of FIG. 5a are transferred into the output registers r1, r2 at the end of the first third and the second third, respectively, of this edge. The arrow shown on the right between curves a and b of FIG. 5a is to indicate that, at the end of the slowly rising edge of curve a, the steepened edge of curve b has reached the desired signal value.
The period for which the "clocking" of the enable inputs en of the output registers r1, r2 is "interrupted" is equal to the duration of the digital signal hz fed to the sequence controller ab of FIG. 1 or to the decoder dc of FIG. 2.
The circuit arrangement in accordance with the invention can be readily implemented in monolithic integrated form. As it uses exclusively digital circuits, it is especially suited for integration using insulated-gate field-effect transistors, i.e., MOS technology.




VCU 2133 Video Codec UNIT

High-speed coder/decoder IC for analog-to-digital and di-
gital-to-analog conversion of the video signal in digital TV
receivers based on the DIGIT 2000 concept. The VCU 2133
is a VLSI circuit in Cl technology, housed in a 40-pin Dil
plastic package. One single silicon chip combines the fol-
lowing functions and circuit details (Fig. 1):
- two input video amplifiers
- one A/D converter for the composite video signal
- the noise inverter
- one D/A converter for the luminance signal
- two D/A converters for the color difference signals
- one RGB matrix for converting the color difference sig-
nals and the luminance signal into RGB signals
- three RGB output amplifiers
- programmable auxiliary circuits for blanking, brightness
adjustment and picture tube alignment
- additional clamped RGB inputs for text and other analog
RGB signals
- programmable beam current limiting
1. Functional Description
The VCU 2133 Video Codec is intended for converting the
analog composite video signal from the video demodulator
into a digital signal. The latter is further processed

digitally
in the VPU 2203 Video Processor and in the DPU 2553 De-
flection Processor. After processing in the VPU 2203 (color
demodulation, PAL compensation, etc.), the VPU‘s digital
output signals (luminance and color difference) are recon-
verted into analog signals in the VCU 2133. From these an-
alog signals are derived the RGB signals by means of the
RGB matrix, and, after amplification in the integrated RGB
amplifiers, the RGB signals drive the RGB output amplifiers
of the color T\/ set.
For TV receivers using the NTSC standard the VPU 2203
may be replaced by the CVPU 2233 Comb Filter Video Pro-
cessor which is pin-compatible with the VPU 2203, but of-
fers better video performance. In the case of SECAM, the
SPU 2220 SECAM Chroma Processor must be connected
in parallel to the VPU 2203 for chroma processing, while
the luma processing remains inthe VPU 2203.
In a more sophisticated CTV receiver according to the Dl-
GIT 2000 concept, after the VPU Video Processor may be
placed the DTI 2223 Digital Transient Improvement Proces-
sor which serves for sharpening color transients on the
screen. The output signals of the DTI are fed to the VCU’s
luma and chroma inputs.
To achieve the desired transient
improvement, the R-Y and B-Y D/A converters of the VCU
must be stopped for a certain time which is done by the
hold pulse supplied by the DTI and fed to the Reset pin 23
of the VCU. The pulse detector following this pin seperates
the (capacitively-coupled) hold pulse from the reset signal.
In addition, the VCU 2133 carries out the functions:
- brightness adjustment
- automatic CRT spot-cutoff control (black level)
- white balance control and beam current limiting
Further, the VCU 2133 offers direct inputs for text or other
analog RGB signals including adjustment of brightness and
contrast for these signals.
The RGB matrix and RGB amplifier circuits integrated in
the VCU 2133 are analog. The CRT spot-cutoff control is
carried out via the RGB amplifiers’ bias, and the white bal-
ance control is accomplished by varying the gain of these
amplifiers. The VCU 2133 is clocked by a 17.7 or 14.3 MHz
clock signal supplied by the MCU 2632 Clock Generator IC.
1.1. The A/D Converter with Input Amplifiers and Bit
Enlargement
The video signal is input to the VCU 2133 via pins 35 and 37
which are intended for normal TV video signal (pin
35) and
for VCR or SCART video signal (pin 37) respectively. The
video amplifier whose action is required, is activated by the
CCU 2030, CCU 2050 or CCU 2070 via the IM bus by soft-
ware. The amplification of both video amplifiers is doubled
during the undelayed horizontal blanking pulse (at pin 36)
in order to obtain a higher digital resolution of the color
synchronization signal (burst). At D 2-MAC reception, the
doubled gain is switched off by means of bit p = 1 (Fig. 8).

The A/D converter is of the flash type, a circuit of 2" com-
parators connected in parallel. This means that the number
of comparators must be doubled if one additional bit is
needed. Thus it is important to have as few bits as possi-
ble. For a slowly varying video signal, 8 bits are required.

ln
order to achieve an 8-bit picture resolution using a 7-bit
converter, a trick is used: during every other line the refer-
ence voltage of the A/D converter is changed by an
amount corresponding to one half of the least significant
bit. ln this procedure, a grey value located between two 7-
bit steps is converted to the next lower value during one
line and to the next higher value during the next line. The
two grey values on the screen are averaged by the viewer’s
eye, thus producing the impression of grey values with
8-bit resolution. Synchronously to the changing reference
voltage of the A/D converter, to the output signal of the Y
D/A converter is added a half-bit step every second line.
The bit enlargement just described must be switched off in
the case of using the D2-MAC standard (q = 1 and r = 1
in Fig. 8). ln the case of using the comb filter CVPU instead
of the VPU, the half-bit adding in the Y D/A converter must
be switched off (r = 1 in Fig. 8).
The A/D converter’s sampling frequency is 17.7 MHZ for
PAL and 14.3 MHz for NTSC, the clock being supplied by
the MCU 2632 Clock Generator
IC which is common to all
circuits for the digital T\/ system. The converter’s resolu-
tion is 1/2 LSB of 8 bits. Its output signal is Gray-coded to
eliminate spikes and glitches resulting from different com-
parator speeds or from the coder itself. The output is fed to
the VPU 2203 and to the DPU 2553 in parallel form.
1.2. The Noise Inverter
The digitized composite video signal passes the noise in-
verter circuit before it is put out to the VPU 2203 and to the
DPU 2553. The noise inverter serves for suppressing bright
spots on the screen which can be generated by noise
VCU 2133
pulses, p. ex. produced by ignition sparks of cars etc. The
function of the noise inverter can be seen in Fig. 2. The
maximum white level corresponds with step 126 of the A/D
converter’s output signal (that means a voltage of 7 V at
pin 35). lf, due to an unwanted pulse on the composite
video signal, the voltage reaches 7.5 V (what means step
127 in digital) or more, the signal level is reduced by such
an amount, that a medium grey is obtained on the screen
(about 40 lFiE). The noise inverter circuit can be switched
off by software (address 16 in the VPU 2203, see there).
1.3. The Luminance D/A Converter (Y)
After having been processed in the VPU 2203 (color de-
modulation, PAL compensation, etc.), the different parts of
the digitized video signal are fed back to the VCU 2133 for
further processing to drive the RGB output amplifiers. The
luminance signal (Y) is routed from the VPU’s contrast mul-
tiplier to the Y D/A converter in the VCU 2133 in the form of
a parallel 8-bit signal with a resolution of 1/2 LSB of 9

bits.
This bit range provides a sufficient signal range for contrast
as well as positive and negative overshoot caused by the
peaking filter (see Fig. 3 and Data Sheet VPU 2203).


The luminance D/A converter is designed as an R-2R lad-
der network. lt is clocked with the 17.7 or the 14.3 MHz
clock signal applied to pin 22. The cutoff frequency of the
luminance signal is determined by the clock frequency.
1.4. The D/A Converters for the Color Difference Signals
R-Y and B-Y
ln order to save output pins at the VPU 2203 and input pins
at the VCU 2133 as well as connection lines, the two digital
color difference signals R-Y and B-Y are transferred in time
multiplex operation. This is possible because these signals’
bandwidth is only 1 MHZ and the clock is a 17.7 or 14.3
MHz signal.
The two 8-bit D/A converters R-Y and B-Y are also built as
R-2R ladder networks. They are clocked with ‘A clock fre-
quency, but the clock for the multiplex data transfer is 17.7
or 14.3 MHz. Four times 4 bits are transferred sequentially,
giving a total of 16 bits. A sync signal coordinates the

multi-
plex operations in both the VCU 2133 and the VPU 2203.
Thus, only four lines are needed for 16 bits. Fig. 4 shows
the timing diagram of the data transfer described.
ln a CTV receiver with digital transient improvement (DTI
2223), the R-Y and B-Y D/A converters are stopped by the
hold pulse supplied by the DTI, and their output signal is
kept constant for the duration of the hold pulse. Thereafter,
the output signal jumps to the new value, as described in
the DTl’s data sheet.
Fig. 4:
Timing diagram of the multiplex data transfer of the chroma
channel between VPU 2203, VCU 2133 and SPU 2220
a) main clock signal QSM
b) valid data out of the VCU 2133’s video A/D converter.
AIAD is the delay time of this converter, about 40 ns.
c) valid data out of the VPU 2203.
d) MUX data transfer of the chroma signals from VPU 2203
to VCU 2133, upper line: sync pulse from pin 27 VPU to
pin 21 VCU during sync time in vertical blanking time,
see Fig. 8; lower line: valid data from pins 27 to 30
(VPU) to pins 18 to 21 (VCU)
1.5. The RGB Matrix and the RGB Output Amplifiers
ln the RGB matrix, the signals Y, R-Y and B-Y are dema-
trixed, the reduction coefficients of 0.88 and 0.49 being tak-
en into account. In addition, the matrix is supplied with a
signal produced by an 8-bit D/A converter for setting the
brightness of the picture. The brightness adjustment range
corresponds to 1/2 of the luminance signal range (see Fig.
3). It can be covered in 255 steps. The brightness is set by
commands fed from the CCU 2030, CCU 2050 or CCU 2070
Central Control Unit to the VPU 2203 via the IM bus.
There are available four different matrices: standard PAL,
matrix 2, 3 and 4, the latter for foreign markets. 'The re-
quired matrix must be mask-programmed during produc-
tion. The matrices are shown in Table 1, based on the for-
mulas:
R = r1~(R-Y)+ l'2~(B-Y) +Y
G = Q1-(Ft-Y)+ Q2 - (B-Y) +Y
B = b1-(Ft-Y)+ bg - (B-Y) +Y
The three RGB output amplifiers are impedance converters
having a low output impedance, an output voltage swing of
6 V (p-p), thereof 3 V for the video part and 3 V for bright-
ness and dark signal. The output current is 4 mA. Fig. 5
shows the recommended video output stage configuration.

For the purpose of white-balance control, the amplification
factor of each output amplifier can be varied stepwise in
127 steps (7 bits) by a factor of 1 to 2. Further, the CRT
spot-cutoff control is accomplished via these amplifiers’ bi-
as by adding the output signal of an 8-bit D/A converter to
the intelligence signal. The amplitude of the output signal
corresponds to one half of the luminance range. The eight
bits make it possible to adjust the dark voltage in 0.5 %
steps. By means of this circuit, the factory-set values for
the dark currents can be maintained and aging of the pic-
ture tube compensated.
1.6. The Beam Current and Peak Beam Current Limiter
The principle of this circuitry may be explained by means of
Fig. 6. Both facilities are carried out via pin 34 of the VCU
2133. For beam current limiting and peak beam current li-
miting, contrast and brightness are reduced by reducing
the reference voltages for the D/A converters Y, Ft-Y and
B-Y. At a voltage of more than +4 V at pin 34, contrast and
brightness are not affected. In the range of +4 V to +3 V,
the contrast is continuously reduced. At +3 V, the original
contrast is reduced to a programmable level, which is set
by the bits of address
16 of the VPU as shown in Table 2. A
further decrease of the voltage merely reduces brightness,
the contrast remains unchanged. At 2 V, the brightness is
reduced to zero. At voltages lower than 2 V, the output
goes to ultra black. This is provided for security purposes.
The beam current limiting is sensed at the ground end of
the EHT circuit, where the average value of the beam cur-
rent produces a certain voltage drop across a resistor in-
serted between EHT circuit and ground. The peak beam
current limiting can be provided additionally to avoid
“blooming” of white spots or letters on the screen. For
this, a fast peak current limitation is needed which is
sensed by three sensing transistors inserted between the
RGB amplifiers and the cathodes of the picture tube. One
of these three transistors is shown in Fig. 6. The sum of the
picture tube’s three cathode currents produces a voltage
drop across resistor R1. If this voltage exceeds that gen-
erated by the divider R2, B3 plus the base emitter voltage
of T2, this transistor will be turned on and the voltage at

pin
34 of the VCU 2133 sharply reduced. Time constants for
both beam current limiting and peak beam current limiting
can be set by the capacitors C1 and C2.
1.7. The Blanking Circuit
The blanking circuit coordinates blanking during vertical
and horizontal flyback. During the latter, the VCU 2133's
output amplifiers are switched to “ultra black”. Such
switching is different during vertical flyback, however, be-
cause at this time the measurements for picture tube align-
ment are Carried out. During vertical flyback, only the ca-
thode to be measured is switched to “black” during mea-
suring time, the other two are at ultra black so that only the
dark current of one cathode is measured at the same time.
For measuring the leakage current, all three cathodes are
switched to ultra black.
The sequence described is controlled by three code bits
contained in a train of 72 bits which is transferred from the
VPU 2203 to the VCU 2133 during each vertical blanking in-
terval. This transfer starts with the vertical blanking pulse.
During the transfer all three cathodes of the pi
cture tube
are biased to ultra black. In the same manner, the white-
balance control is done.
The blanking circuit is controlled by two pulse combina-
tions supplied by the DPU 2553 Deflection Processor
(“sandcastle pulses"). Pin 39 of the VCU 2133 receives the
combined vertical blanking and delayed horizontal blanking


pulse from pin 22 of the DPU (Fig. 7 b), and pin 36 of the
VCU gets the combined undelayed horizontal blanking and
color key pulse from pin 19 of the DPU (Fig. 7 a). The two
outputs of the DPU are tristate-controlled, supplying the
output levels max. 0.4 V (low), min. 4.0 V (high), or high-im-
pedance, whereby the signal level in the high-impedance
mode is determined by the VCU’s input configuration, a
voltage divider of 3.6 KS! and 5 KQ between the +5 V sup-
ply and ground, to 2_8 V. The VCU’s input amplifier has two
thresholds of 2.0 V and 3.4 V for detecting the three levels
of the combined pulses. ln this way, two times two pulses
are transferred via only two lines.
1.8. The Circuitry for Picture Tube Alignment
During vertical flyback, a number of measurements are tak-
en and data is exchanged between the VCU 2133, t
he VPU
2203 and the CCU 2030 or CCU 2050. These measure-
ments deal with picture tube alignment, as white level and
dark current adjustment, and with the photo current sup-
plied by a photo resistor (Fig. 5) which serves for adapting
Fig. 8:
Data sequence during the transfer of test results from the
VPU 2203 to the VCU 2133. Nine Bytes are transferred, in
each case the LSB first. These 9 Bytes, 8 bits each, coin-
cide with the 72 pulses of 4.4 MHz that are transferred dur-
ing vertical flyback from pin 27 of the VPU 2203 to pin 21 of
the VCU 2133 (see Fig. 9).
l and mi beam current limiter range
l<: noise inverter on/off
n: video input switching bit
S: SECAM chroma sync bit; S = 1 means that the chroma
demultiplexer is synchronized every line. The switch-over
time from C0 to demux counter begins with the end of the
undelayed horizontal blanking pulse and remains valid for a
time of 12 Q M clock periods.
6
the contrast of the picture to the light in the room where
the TV set is operated. The circuitry for transferring the

pic-
ture tube alignment data, the sensed beam currents and
the photo current is clocked in compliance with the VPU
2203 by the vertical blanking pulse and the color key pulse.
To carry out the measurements, a quadruple cycle is pro-
vided (see Table 3). The timing of the data transfer during
the vertical flyback is shown in Fig. 9, and Fig. 8 shows the
data sequence during that data transfer.
Ft, G, B: code bits
p=1; no doubled gain in the input amplifier during horizon-
tal blanking (see section 1.1.)
q=1: no changing of the A/D converter’s reference vol-
tage during every other line (see section 1.1.)
r=1: when operating with the DMA D2-MAC decoder or
the CVPU comb filter video processor, the adding of
a step of ‘/2 LSB to the output signal of the Y D/A
converter is switched off (see section 1.1.).
s=1; the blankirig pulse in the analog video output signal
at pins 26 to 28 is switched off, as is required in
stand-alone applications.


1.9. The Additional RGB Inputs
The three additional analog RGB inputs are provided for
inputting text or other analog RGB signals. They are con-
nected to fast voltage-to-current converters whose output
current can be altered in 64 steps (6 bits) for contrast set-
ting between 100 % and 30 %. The three inputs are
clamped to a DC black level which corresponds to the level
of 31 steps in the luminance channel, by means of the color
key pulse. So, the same brightness level is achieved for
normal and for external RGB signals. The output currents
ofthe converters are then fed to the three RGB output am-
plifiers. Switchover to the external video signal is also

fast.
1.10. The Reset Circuit and Pulse Detector
The reset pulse produced by the external reset RC network
in common for the whole DIGIT 2000 system, switches the
RGB outputs to ultra black during the power-on routine of
the TV set. At other times, high level must be applied to the
reset input pin 23.
There is an additional facility with pin 23 which is used only
in conjunction with the DTl 2223 Digital Transient Improve-
ment Processor. The hold pulse produced by the latter
which serves for stopping the R-Y and B-Y D/A converters,
is also fed to pin 23, capacitively-coupled. The pulse detec-
tor responds on positive pulses which exceed the 5 V sup-
ply by about 1 V. The two DACs are stopped as long as the
hold pulse lasts, and sup
ply a constant output signal of the
amplitude at the begin of the hold pulse.


5. Description of the Connections and the Signals
Pins 1, 9, and 25 - Supply Voltage, +5 V
The supply voltage is +5 V. Pins 1 and 25 supply the ana-
log part and must be filtered separately.
Pins 2 to 8 - Outputs V0 to V6
Via these pins the VCU 2133 supplies the digitized video
signal in a parallel 7-bit Gray code to the VPU 2203 and the
DPU 2553. The output configuration is shown in Fig. 16.
Pins 10 to 17 - Inputs L7 to L0
Fig. 17 shows these inputs’ configuration. Via these pins,
the VCU 2133 receives the digital luminance signal from the
VPU 2203 in a paraliel 8-bit code.
Pins 18 to 21 - Inputs C0 to C3
Via these inputs, whose circuitry and data correspond to
those of pins 10 to 17, the VCU 2133 is fed with the digi-
tized color difference signals R-Y and B-Y and with the
control and alignment signals described in section 1.8., in
multiplex operation. Pin 21 is additionally used for the

multi-
plex sync signal.
Pin 22 - QSM Main Clock Input
Via this pin, whose circuitry is shown in Fig. 18, the VCU
2133 is supplied with the clock signal QSM produced by the
MCU 2600 or MCU 2632 Clock Generator IC. The clock fre-
quency is 17.7 MHz for PAL and SECAM and 14.3 MHz for
NTSC. The clock signal must be DC-coupled.
Pin 23 - Reset and Hold Pulse Input (Fig. 19)
Via this pin, the VCU 2133 is supplied with the reset and
hold signals which are supplied by pin 21 of the DTI 2223
Digital Transient Improvement Processor for stopping the
R-Y and B-Y D/A converters, and for Reset.
Pins 24 and 29 - Analog Ground, 0
These pins serve as ground connections for the supply and
for the analog signals (GND pin 24 for RGB).
Pins 26 to 28 - RGB Outputs
These three analog outputs deliver an analog signal suit-
able for driving the RGB output transistors. Their diagram
is shown in Fig. 20. The output voltage swing is 6 V total,
3 V for the black-to-white signal and 3 V for adjusting
the brightness and the black level.
Pins 30 to 32 - Additional Analog Inputs R, G and B
Fig. 21 shows the configuration of these inputs. They serve
to feed analog RGB signals, for example for Teletext or si-
milar applications, and they are clamped during the color
key pulse. At a 1 V input, full brightness is reached. The
bandwidth extends from 0 to 8 MHz.
Pin 33 - Fast Switching Input
This input is connected as shown in Fig. 22. It ser\/es for
fast switchover of the video channel between an internally-
produced video signal and an externally-applied video sig-
nal via pins 30 to 32. With 0 V at pin 33, the RGB outputs
will supply the internal video signal, and at a 1 V input

level,
the RGB outputs are switched to the external video signal.
Bandwidth is 0 to 4 MHz, and input impedance 1 KQ mini-
mum.
Pin 34 - Beam Current Limiter Input
The diagram of pin 34 is shown in Fig. 25. The input voltage
may be between +5 V and 0 V. The input impedance is 100
kQ. The function of pin 34 is described in section 1.6.
Pin 35 - Composite Video Signal Input 1
To fully drive the video A/D converter the following ampli-
tudes are required at pin 35: +5 V = sync pulse top level,
all bits low; +7 V = peak white, all bits high. Fig. 24 shows
the configuration of pin 35.
Pin 36 - Undelayed Horizontal Blanking and Color Key
Pulse Input
The circuitry of this pin is shown in Fig. 23. Pin 36 receives
the combined undelayed horizontal blanking and color key
pulse which are “sandcastled” and are supplied by pin 19
of the DPU 2553 Deflection Processor. During the undelay-
ed horizontal blanking pulse, the input amplifiers’ gain is
doubled, and the bit enlargement circuit is also switched
by this pulse, and the counter for the data transmission
gap started. The color key pulse is used for clamping the
RGB inputs pins 30 to 32.
Pin 37 - Composite Video Signal Input 2
This pin has the same function and properties as pin 35,
except the gain of the input
amplifier which is twice the
gain as that of the amplifier at pin 35. This means an input
voltage range of +5 V to +6 V.
Pin 38 - Supply Voltage, +12 V »
The 12 V supply is needed for certain circuit parts to obtain
the required input or output voltage range, as the video in-
put and the RGB outputs (see Figs. 20 and 24).
Pin 39 - Vertical Blanking and Delayed Horizontal Blanking
Input
This pin receives the combined vertical blanking and delay-
ed horizontal blanking. pulse from pin 22 of the DPU 2553
Deflection Processor. Both pulses are “sandcastled” so
that only one connection is needed for the transfer of two
pulses. These two pulses are separated in the input circui-
try of the VCU 2133, and are used for blanking the picture
during vertical and horizontal flyback. Fig. 23 shows the cir-
cuitry of pin 39.
Pin 40 - Digital Ground, O
This pin is used as GND connection in conjunction with the
pins 2 to 8 and 10 to 21 which carry digital signals.


DPU 2553, DPU
2554 Deflection Processors UNIT

Note: lf not otherwise designated, the pin numbers
mentioned refer to the 40-pin Dil package.

1. Introduction
These programmable VLSI circuits in n-channel mOS
technology carry out the deflection functions in digital
colorTV receivers based onthe DiGiT 2000 system and
are also suitable for text and D2~mAC application. The
three types are basically identical, but are modified ac-
cording to the intended application:

DPU 2553
normal-scan horizontal deflection, standard CTV re-
ceivers, also equipped with Teletext and D2-mAC fa-
cility
DPU 2554
double-scan horizontal deflection, for CTV receivers
equipped with double-frequency horizontal deflection
and double-~frequency vertical deflection for improved
picture quality. At power-up, this version starts with
double horizontal frequency.

1.1. General Description
The DPU 2553/54 Deflection Processors contain the fol-
lowing circuit functions on one single silicon chip:
- video clamping
- horizontal and vertical sync separation
~ horizontal synchronization
- normal horizontal deflection
-east-west correction, also for flat-screen picture
tubes
- vertical synchronization
- normal vertical deflection
~ sawtooth generation
-text display mode with increased deflection frequen-
cies (18.7 kHz horizontal and 60 Hz vertical)
- D2-mAC operation mode

and for DPU 2554 only:
- double-scan horizontal deflection
- normal and double-scan vertical deflection
ln this data sheet, all information given for double~scan
mode is available with the DPU 2554 only. Type DPU
2553 starts the horizontal deflection with 15.5 kHz ac-
cording to the normal TV standard, whereas type DPU
2554 starts with 31 kHz according to the double-scan
system.
The following characteristics are programmable:
~ selection ofthe TV standard (PAL, D2-mAC or NTSC)
- selection ofthe deflection standard (Teletext, horizon-
tal and vertical double-scan, and normal scan)
- filter time»constant for horizontal synchronization
- vertical amplitude, S correction, and vertical position
for in-line, flat-screen and Trinitron picture tubes
- east-west parabola, horizontal width, and trapezoidal
correction for in-line, flat-screen and Trinitron picture
tubes

- switchover characteristics between the different syn-
chronization modes
~characteristic of the synchronism detector for PLL
switching and muting

1.2. Environment
Fig. 1-1 showsthe simplified block diagram ofthe video
and deflection section of a digital TV receiver based on
the DIGIT 2000 system. The analog video signal derived
from the video detector is digitized in the VCU 2133,
VCU 2134 or VCU 2136 Video Codec and supplied in a
parallel 7 bit Gray code. This digital video signal is fed to
the video section (PVPU, CVPU, SPU and DmA) and to
the DPU 2553/54 Deflection Processorwhich carries out
all functions required in conjunction with deflection, from
sync separation to the control of the deflection power
stages, as described in this data sheet.




3. Functional Description
3.1. Block Diagram
The DPU 2553 and DPU 2554 Deflection Processors
perform all tasks associated with deflection in TV sets;
- sync separation
- generation and synchronization of the horizontal and
the vertical deflection frequencies
-the various eastevvest corrections
- vertical savvtooth generation including S correction
as described hereafter. The DPU communicates, viathe
bidirectional serial lm bus, with the CCU 2050 or CCU
2070 Central Control Unit and, via this bus, is supplied
with the picture-correction alignment information stored
in the mDA 2062 EEPROM during set production, vvhen
the set is turned on. The DPU is normally clocked with
a trapezoidal 17.734 mHz (PAL or SECAm), or 14.3 mhz
(NTSC) or 20.25 mHz (D2-mAC) clock signal supplied
by the mCU 2600 or mCU 2632 Clock Generator IC.

The functional diagram of the DPU is shovvn in Fig. 3-1.
3.2. The Video Clamping Circuit and the Sync Pulse
Separation Circuit

The digitized composite video signal delivered as a 7»bit
parallel signal by the VCU 2133, VCU 2134 or VCU 2136
Video Codec is first noise-filtered by a 1 mHz digital lovv-
pass filter and, to improve the noise immunity ofthe
clamping circuit, is additionally filtered by a 0.2 mHz low-
pass filter before being routed to the minimum and back
porch level detectors (Fig. 3-3).
The DPU has tvvo different clamping outputs, no. 1 and
No. 2, one of vvhich supplies the required clamping
pulses to the video input of the VCU as shovvn in Fig.
3-1. The following values forthe clamping circuit apply
for Video Amp. l. since the gain of Video Amp. ll istwice
th at of Video Amp l, all clamping a
nd signal levels of Vid-
eo Amp ll are halt those of Video Amp l referred to +5 V.
Afterthe TV set is switched on,thevideo clamping circuit
first of all ensures by means of horizontal-frequency
current pulses from the clamping output of the DPU to
the coupling capacitor of the analog composite video
signal, that the video signal atthe VCU’s input is optimal-
ly biased for the operation range of the A/D converter of
5 to 7 V. For this, the sync top level is digitally measured
and set to a constant level of 5.125 V by these current
pulses. The horizontal and vertical sync pulses are novv
separated by a fixed separation level of 5.250 V so that
the horizontal synchronization can lock to the correct
phase (see section 3.3. and Figs. 3-2 and 3-3).
vvith the color key pulse which is now present in syn-
chronism with the composite video signal, the video
clamping circuit measures the DC voltage level of the
porch and by means of the pulses from pin 21 (or pin4),
sets the DC level ofthe porch at a constant 5.5 V (5.25 V
for Video Amp ll). This level is also the reference black
to Video Processorffeletext Processor, D2-MAC Processor tc.


level for the PVPU 2204 or CvPU 2270 Video Proces-
sors.
When horizontal synchronization is achieved,
the slice
level for the sync pulses is set to 50 % of the sync pulse
amplitude by averaging sync top and black level. This
ensures optimum pulse separation, even with small
sync pulse amplitudes (see application notes, section
4).


3.3. Horizontal Synchronization
Two operating modes are provided for in horizontal syn-
chronization. The choice of mode depends on whether
or not the Tv station is transmitting a standard PAL or
NTSC signal, in which there is a fixed ratio between color
subcarrier frequency and horizontal frequency. ln the
first case we speak of “color-locked” operation and in
the second case of “non-color-locked” operation (e.g.
black-and-white programs). Switching between thetwo
modes is performed automatically by the standard sig-
nal detector.


3.3.1. Non-Color-Locked Operation
ln the non»locked mode,which is needed in the situation
where there is no standard fixed ratio between the color
subcarrier frequency and the horizontal frequency ofthe
transmitter, the horizontal frequency is produced by subdemding the clock frequency (1 7.7 mHz for PAL and SECAM, 14.3
mHz for NTSC) in the programmable fre-
quency dmder (Fig. 3-4) until the correct horizontal
frequency is obtained. The correct adjustment of fre-
quency and phase is ensured by phase comparator l.
This determines the frequency and phase deviation by
means of a digital phase comparison between the sepa-
rated horizontal sync pulses and the output signal of the
programmable dmder and corrects the dmder accordingly. For
optimum adjustment of phase iitter, capture
behavior and transient response of the horizontal PLL
circuit, the measured phase deviation is filtered in a digi-
lowpass filter (PLL phase filter). ln the case of non-
OZMH synchronized horizontal PLL, this filter is set to
wideband PLL response with a pull-in range of 1800 Hz. if the
- sync sync PLL circuit is locked, the PLL filter is
automatically switched to narrow-band response by an internal
synchronism detector in order to limit the phase jitter to a
minimum, even in the case of weak and noisy signals.

A calculator circuit in phase comparator , which analyzes the
edges of the horizontal sync pulses, increases
the resolution of the phase measurement from 56 ns at
Fig. 3-3: Principle ofvideo clamping and pulse separa- 17.7

mHz clock frequency to approx. 6 ns, or from 70 ns
NON at 14.3 MHz clock frequency to approx. 2.2 ns.



The various key and gating pulses such as the color key
pulse (tKe(,), the normal-scan (1 H) and double-scan
(2H) horizontal blanking pulse (tAZ(/) and the 1 H hori-
zontal undelayed gating pulse (t/(Z) are derived from the
output signals ofthe programmable dmder and an addi-
tional counter forthe2H signals and the 1 H and 2H skew
data output. These pulses retai
n a fixed phase position
with respect to the 1 H inputvideo signal andthe double-
scan output video signal from the CvPU 2270 Video Pro-
cessor
Forthe purpose of equalizing phase changes in the hori-
zontal output stage due to switching response toler-
ances or video influence, a second phase control loop
is used which generates the horizontal output pulse at
pin 31 to drivethe horizontal output stage. ln phase com-
parator li (Fig. 3~4), the phase difference between the
output signal of the programmable dmder and the lead-
ing edge (or the center) of the horizontal flyback pulse
(pin 23) is measured by means of a balanced gate delay
line. The deviation from the desired phase difference is
used as an input to an adder. ln this, the information on
the horizontal frequency derived from phase com-
parator l is added to the phase deviation originating form
phase comparator ll. The result of this addition controls
a digital on-chip sinewave generator (about 1 mHz)
which acts as a phase shifter with a phase resolution of
1/128 of one main clock period m_
By means of control loop ll the horizontal output pulse
(pin 31) is shifted such that the horizontal flyback pulse
(pin 23) acquiresthe desired phase position with respect
to the output signal of the programmable dmder which,
in turn, due to phase comparator l, retains a fixed phase
position with respect to the video signal. The horizontal
output pulse itself is generated by dmding the frequency
ofthe 1 mHz sinewave oscillator by a fixed ratio of 64 in
the case of norm al scan and of 32 in the case of double-
scan operation.


3.3.2. Color-Locked Operation
When in the color~locked operating mode, after the
phase position has been set in the non-color-locked
mode, the programmable dmder is set to the standard
dmsion ratio (1135:1 for PAL, 91O:1 for NTSC) and
phase comparator is disconnected so that interfering
pulses and noise cannot influence the horizontal deflec-
tion. Because phase comparator ll is still connected,
phase errors ofthe horizontal output stage are also cor-
rected in the color»locKed operating mode. The stan-
dard signal detector is so designed that it only switches
to color-locked operation when the ratio between color
subcarrier frequency and horizontal frequency deviates
no more than 1O'7 from the standard dmsion ratio. To
ascertain this requires about 8 s (NTSC). Switching off
color-locked operation takes place automatically, in the
_ case of a change of program for example, within approx-
imately 67 ms (e.g. two NTSC fields, 60 Hz).


3.3.3. Skew Data Output and Field Number Informa-
tion
with non-standard input signals, the TPU 2735
or TPU
2740 Teletext Processor produce a phase error vvith re-
spect to the deflection phase.
The DPU generates a digital data stream (skevv data,
pin 7 ofthe DPU), which informs the PSP and TPU on
the amount of phase delay (given in 2.2 ns increments)
used in the DPU for the 1H and 2h output pulse com-
pared With the Fm main clock signal of 17.7 mHz (PAL
or SECAm) or 14.3 mhz (NTSC), see also Figs. 3-6 to
3-8. The skew data is used by the PSP and by the TPU
to adjust the double-scan video signal to the 1 H and 2H
phase of the horizontal deflection to correct these phase
errors.
For the vmC processor the skew data contains three additional

bits for information about frame number, 1 V
sync and 2 V sync start.


3.3.4. Synchronism Detector for PLL and Muting
Signal
To evaluate locking ofthe horizontal PLL and condition
of the signal, the DPU’s HSP high-speed processor
(Fig. 3~1) receives two items of information from the hor-
izontal PLL circuit (see Fig. 3-11).
a) the overall pulsevvidth of the separated sync pulses
during a 6.7 us phase window centered to the horizontal
sync pulse (value A in Fig. 3-11).
b) the overall pulsevvidth of the separated sync pulse
during one horizontal line but outside the phase window
(value B in Fig. 3-11).
Based on a) and b) and using the selectable coefficients
KS1 and KS2 and a digital lovi/pass filter, the HSP pro-
cessor evaluates an 8-bit item of information “SD” (see
Fig. 3-12). By means of a comparator and a selectable
level SLP, the switching threshold for the PLL signal
“UN” is generated. UN indicates Whether the PLL is in
the synchronous or in the asynchronous state.
To produce a muting signal in the CCU, the data SD can
be read by the CCU. The range ot SD extends from O
(asynchronous) to +127 (synchronous). Typical values
torthe comparator levels and their hysteresis B1 = 30/20
and for muting 40/30 (see also HSP Bam address Table
5-6).



DPU 2553, DPU 2554

3.4. Start Oscillator and Protection Circuit
To protect the horizontal output stage of the TV set dur-
ing changing the standard and for using the DPU as a
low power start oscillator, an additional oscillator is pro-
vided on-chip (Fig. 3-4), with the output connected to
pin 31. This oscillator is controlled by a 4 mHz signalin-
dependent trom the Fm main clock produced by the
MCU 2600 or mCU 2632 Clock Generator IC and is pow-
ered by a separate supply connected to pin 35. Thefunc-
tion ofthis circuitry depends on the external standard se-
lection input pin 33 and on the start oscillator select input
pin 36, as described in Table 3-3. Using the protection
circuit as a start oscillator, the following operation modes
are available (see Table 3-3).
With pin 33 open-circuit, pin 36 at high potential (con-
nected to pin 35) and a 4 mHz clock applied to pin 34,
the protection circuit acts as a start oscillator. This pro-
duces a constant-frequency horizontal output pulse of
15.5 kHz in the case of DPU 2553, and of 31 khz in the
case of DPU 2554 while the Bese
t input pin 5 is at low
potential. The pulsewidth is 30 us with DPU 2553, and
16 us with DPU 2554. main clock at pin 2 or main power
supplies at pins 8, 32 and 40 are not required for this start
oscillator After the main power supply is stabilized and
the main clock generator has started, the reset input pin
5 must be switched to the high state. As long as the start
values from the CCU are invalid, the start oscillator will
continuously supply the output pulses of constant fre-
quency to pin 31 _ By means of the start values given by
the CCU via the lm bus, the register FL must be set to
zero to enable the stan oscillator to be triggered by the
horizontal PLL circuit. After that, the output frequency
and phase are controlled by the horizontal PLL only.
It the external standard selection input pin 33 is con-
nected to ground or to +5 V, the start oscillator is
switched off as soon as it ls in phase with PLL circuit. Pin
33to ground selects PAL or SECAm standard (17.7 mHz
main clock), and pin 33 to +5 V selects NTSC standard
(14.3 MHz main clock). After the main power supplies to
pins 8, 32 and 40 are stabilized, the start oscillator can
be used as a separate horizontal oscillator with a con-
stant frequency of 15.525 khz. For this option, pin 33
must be unconnected. By means ofthe lm bus register
SC the start oscillator can be switched on (SC = 0) or oft
(SC = 1). Setting SC =1 is recommended.
By means of pin 29 (horizontal output polarity selectin-
put and start oscillator pulsewidth select input), the out-
put pulsewidth and polarity ofthe start oscillator and pro-
tection circuit can be hardware-selected. Pin 29 at low
potential gives 30 us for DPU 2553 and 16 us for DPU
2554,with positive output pulses. Pin 29 at high potential
gives 36 us for DPU 2553 and 18 i
ts for DPU 2554, with
negative output pulses. Both apply forthetime period in
which no start values are valid from the CCU. If pin 29
is intended to be in the high state, it must be connected
to pin 35 (standby power). Pin 29 must be connected to
ground or to +5 V in both cases.
Table 3-3: Operation modes ofthe start oscillator and
protection circuit


Operation Mode Pins
33 34 35 36
Horizontal output stage protected not connected 4 mHz Clock at

+5 V at ground
during main clock frequency changing
(for PAL and NTSC)
Horizontal output stage protected not connected 4 MHz Clock +5

V with connected to
and start oscillator function start oscilla- pin 35
(for PAL and NTSC) tor supply
Only start oscillator function with at +5 V 4 mHz Clock +5 V

with connected to
NTSC standard after Beset start oscilla- pin 35
tor supply
Only start oscillator function with at ground 4 mHz Clock +5 V

with connected to
PAL or SECAM standard after Beset start oscilla~ pin 35
5 tor supply
_ with 17.7 mHz clock at ground at ground at +5 V at ground
without protection.



3.5. Blanking and Color Key Pulses

Pin 19 supplies a combination ofthe color key pulse and
the undelayed horizontal blanking pulse in the form of a
three-level pulse as shown in Fig. 3-13. The high level
(4 V min.) and the low level (0.4 V max.) are controlled
by the DPU. During the low time of the undelayed hori-
zontal blanking pulse, pin 19 of the DPU i sin the high--
impedance mode and the output level at pin 19 is set to
2.8 V by the VCU.
At pin 22, the delayed horizontal blanking pulse in com-
bination with the vertical blanking pulse is available as
athree-level pulse as shown in Fig. 3-13. Output pin 22
is in high-impedance mode during the delayed horizon-
tal blanking pulse.
ln double-scan operation mode (DPU 2554), pin 22 sup-
plies the double-scan (2H) horizontal blanking pulse in-
stead ofthe 1H blanking pulse (DPU 2553). ln text dis-
play mode with increased deflection frequencies (see
section 1.), pin 22 ofthe respective DPU (DPU 2553, as
defined by register ZN) delivers the horizontal blanking
pulse with 18.7 kHz and the vertical blanking pulse with
60 Hz according to the display. At pin 24 the undelayed
horizontal blanking pulse is output.
normally,pin3suppliesthe samevertical blanking pulse
as pin 22. However, with“DVS” = 1, pin 3 will be in the
single-scan mode also with double-scan operation of
the system. The pulsewidth of the single-scan vertical
blanking pulse at pin 3 will be the same as.that of the
double-scan vertical blanking pulse at pin 22. The out-
put pulse of pin 3 is only valid if the COU register “VBE”
is set to 1 . The default value is set to 0 (high-impedance
state of pin 3).

Fig. 3-13: Shape of the output
pulses at pins 19 and 22
*) The output level is externally defined
3.6. Output for Switching the Horizontal Power
Stage Between 15.6 kHz (PAL/NTSC) and 18 kHz
(Text Display)
This output (pin 37) is designed as a tristate output. High
levels (4 V mln.) and low levels (0.4 V max.) are con-
trolled bythe DPU. During high-impedance state an ex-
ternal resistor network defines the output level,
For changing the horizontal frequency from 15 kHz to
18 kHz, the following sequence of output levels is
derived at pin 37 (see Fig. 3-14).
After register ZN is set from ZN = 2 (15 kHz) to ZN = 0
(18 kHz) by the CCU, pin 37 is switched from High level
to high-impedance state synchronously with the fre-
quency change at pin 31. Following a delay of 20ms, pin
37 is set to Low level and remains in this state forthetime
the horizontal frequency remains 18 kHz (with ZN == 0).
This 20 ms delay is required for switching-over the hori-
zontal power stage.
To change the horizontal frequency in the opposite di-
rection, from 18 kHz to 15.6 kHz, the sequence de-
scribed is reversed.


3.7. Text Display Mode with Increased Deflection
Frequencies
As already mentioned, the DPU 2553 provides the fea-
ture of increased deflection frequencies for text display
for improved picture quality in this mode of operation. To
achieve this, the processor acting as deflection proces-
sor has its register Zn set to 0. The horizontal output fre-
quency at pin 31 is then switched to a frequency of
18746.802 Hz which is generated by dmding the Fm
main clock frequency by 946 i 46. The horizontal PLL is
then able to synchronize to an external composite sync
signal offH = 18.746 kHzi 46. The horizontal PLL isthen
able to synchronizeto an external composite sync signal
of fH = 18.746 kHzi 5 % and f\, = 60 Hz i 10 % and can
be set to an independent horizontal and vertical sync
generator by setting register VE = 1 and register VB = 0.
That means a constant dmder of 946 for horizontal fre-
quency and constant 312 lines per frame.

The DPU working in this mode supplies the TPU 2740
Teletext Processor or the respective Viewdata Proces-
sor with the 18.7 kHz horizontal blanking pulses form pin
24 and the 60 Hz vertical blanking pulses form pin 22
(see Fig. 3-8).
To be able to receive and store data from an IF video sig-
nal at the same time, the Teletext or Viewdata Processor
requires horizontal and vertical sync pulses from this IF
signal. Therefore, the second DPU provides video
clamping and sync separation forthe external signal and
supplies the horizontal sync pulses (pin 24) and t
he ver-
tical sync pulses (pin 22) to the Teletext or viewdata Pro-
cessor. For this, the second DPU is set to the PAL stan-
dard by register ZN = 2, and the clamping pulses of the
other DPU are disabled by CLD = 1.
To change the output frequency ofthe DPU acting as de-
flection processor from 18.7 kHz to 15.6 kHz, the control
switch output pin 37 prepares the horizontal output
stage for 15.6 khz operation (pin 37 is in the high-impe-
dance state) beforethe DPU changesthe horizontal out-
put frequencyto 15.6 kHz, after a minimum delay of one
vertical period. Switching the horizontal deflection fre-
quency from 15.6 kHzto 18.7 kHz is done in the reverse
sequence. Firstly, the horizontaloutput frequency of pin
31 is switched to 1 8.7 khz, and after a delay of one verti-
cal period, pin 37 is set low.
3.8. D2-MAC Operation Mode
When receiving Tv signals having the D2-mAC stan-
dard (direct satellite reception), register ZN is set to 3.
The programmable dmder is set to a dmsion ratio of
1296 i48 to generate a horizontal frequency of 15.625
khz with the clock rate of 20.25 mHz used in the
D2-mAC standard. ln this operation mode, pin 6 acts as
input forthe composite sync signal supplied by the DmA
2271 D2-mAC Decoder. The DPU is synchronized to
this sync signal, and after locking-in (status register
UN = 0), the CCU switches the DPU to a clock-locked
mode between clock signal and horizontal frequency
(fm main
clock by 1024, during the vertical sync signal separated
from the received video signal. To use an 8-bit register,
the result of the count is dmded by 2 and given to the
DPU status register. ln the CCU, the vertical frequency
can be evaluated using the following equation:

fv I __lL1’_l\
1024- vP- 2
with
fm), = 17.734475 mHz with PAL and SECAm
fq,M =14.31818 mHz with NTSC
rw = 2o_25 MHZ with D2-mAc
VP = status value, read from DPU.

The interlace control output pin 39 supplies a 25 Hz (for
PAL and SECAm) or 80 Hz (for NTSC) signal for control-
ling an external interlace-off switch, which is required
with A.C.-coupled vertical output stages, becausethese
are not able to handle the internal interlace-off proce-
dure using register “ZS”.
For operation with the vmC Processor the DPU 2554
hasthree interlace control modes in double vertical scan
mode (DVS = 1). These options can be selected with the
register “IOP” and can be used together with the control
output pin 39 only. This output has to be connected to the
vertical output stage, so that the vertical phase can be
shifted by 16 us (or 32 us with DPU 2553).



 
 






























ITT DIGIT2000 CATHODE RAY TUBE (Kinescope) driver with kinescope current sensing circuit:

A television receiver includes a kinescope and a current sensing transistor for conveying amplified video signals to the kinescope, and for providing at a sensing output terminal an output signal related to the magnitude of kinescope current conducted during given sensing intervals. A clamping circuit clamps the sensing output terminal during normal image intervals, and unclamps the sensing output terminal during the sensing intervals. The clamping circuit facilitates interfacing the sensing transistor with utilization circuits which process the sensed output signal, and assists to maintain a proper operating condition for the sensing transistor.


1. In a video signal processing system including an image reproducing device for displaying video information in response to a video signal applied thereto, apparatus comprising:
a video output driver stage with a video signal input and a video signal output for providing an amplified video signal;
means for conveying said amplified video signal to said image reproducing display device, said conveying means having a sensing output for providing thereat a sensed signal representative of the current conducted by said image reproducing display device;
utilization means responsive to said sensed signal; and
clamping means for selectively clamping said sensing output during normal image intervals, and for unclamping said sensing output during intervals when said sensed signal representative of current conducted by said image reproducing display device is subject to processing by said utilization means; wherein
said clamping means comprises clamping transistor means with an output first electrode coupled to said sensing output, a second electrode coupled to an operating potential, and an input third electrode coupled to said sensing output, the conduction of said clamping transistor means being controlled in accordance with the magnitude of said sensed signal as received by said third electrode; and
said clamping transistor means is self-keyed to exhibit clamping and non-clamping states in response to said sensed representative signal.
2. Apparatus according to claim 1, wherein:
said video output stage comprises a video amplifier with a video signal input and a video signal output for providing said amplified video signal; and
said conveying means comprises an active current conducting device with an input first terminal for receiving said amplified video signal, an output second terminal for conveying said amplified video signal to said image reproducing display device, and a third terminal for providing said sensed signal.
3. Apparatus according to claim 2, wherein
said active current conducting device is a transistor with a base input for receiving said amplified video signal, an emitter output for providing said amplified video signal to said image reproducing display device, and a collector output for providing said sensed signal.
4. Apparatus according to claim 1, wherein
said first and second electrodes define a main current conduction path of said clamping transistor means.
5. Apparatus according to claim 4, wherein
said clamping means includes resistive means coupled to said sensing output for providing a voltage in accordance with the magnitude of said sensed signal; and
said third electrode of said clamping transistor means is coupled to said resistive means.
6. Apparatus according to claim 1, and further comprising
filter means for bypassing high frequency signal components at said sensing output.
7. In a video signal processing system including an image reproducing device for displaying video information in response to a video signal applied thereto, apparatus comprising:
a video output driver stage coupled to said image reproducing display device for providing an amplified video signal thereto, and having a sensing output for providing thereat a sensed signal representative of the current conducted by said image reproducing display device;
control means responsive to said sensed signal for developing a control signal;
means for coupling said control signal to said image reproducing display device to maintain a desired conduction characteristic of said image reproducing display device; and
clamping means for selectively clamping said sensing output during normal image intervals, and for unclamping said sensing output during intervals when said control means operates to monitor said sensed signal; wherein
said clamping means comprises clamping transistor means with an output first electrode coupled to said sensing output, a second electrode coupled to an operating potential, and an input third electrode coupled to said sensing output, the conduction of said clamping transistor means being controlled in accordance with the magnitude of said sensed signal as received by said third electrode; and
said clamping transistor means is self-keyed to exhibit clamping and non-clamping states in response to said sensed signal.
8. Apparatus according to claim 7, wherein
said control means includes digital signal processing circuits; and
said control means includes an input analog-to-digital signal converter network.
9. In a video signal processing system including an image reproducing device for displaying video information in response to a video signal applied thereto, apparatus comprising:
a video amplifier with a video signal input for receiving video signals, and a video signal output for providing an amplified video signal;
a signal coupling transistor with an input first electrode for receiving said amplified video signal from said video amplifier, an output second electrode for providing a further amplified video signal to said image reproducing display device, and a third electrode for providing a sensed signal representative of the magnitude of the current conducted by said image reproducing display device;
utilization means responsive to said sensed signal; and
clamping means for selectively clamping said third electrode of said coupling transistor during normal image intervals, and for unclamping said third electrode during interval when said sensed representative signal is subject to processing by said utilization means, said clamping means comprising clamping transistor means with an output first electrode coupled to said third electrode of said signal coupling transistor, a second electrode coupled to an operating potential, and an input third electrode coupled to said third electrode of said signal coupling transistor, the conduction of said clamping transistor means being controlled in accordance with the magnitude of said sensed signal as received by said input third electrode of said clamping transistor means.
10. Apparatus according to claim 9, wherein
said coupling transistor is an emitter follower transistor with a base input electrode, an emitter output electrode, and a collector output electrode corresponding to said third electrode.
Description:
This invention concerns a video output display driver amplifier for supplying high level video output signals to an image display device such as a kinescope in a television receiver. In particular, this invention concerns a display driver stage associated with a sensing circuit for providing a signal representative of the magnitude of current conducted by the kinescope during prescribed intervals.
Video signal processing and display systems such as television receivers commonly include a video output display driver stage for supplying a high level video signal to an intensity control electrode, e.g., a cathode electrode, of an image display device such as a kinescope. Television receivers sometimes employ an automatic black current (bias) control system or an automatic white current (drive) control system for maintaining desired kinescope operating current levels. Such control systems typically operate during image blanking intervals, at which time the kinescope is caused to conduct a black image or a white image representative current. Such current is sensed by the control system, which generates a correction signal representing the difference between the magnitude of the sensed representative current and a desired current level. The correction signal is applied to video signal processing circuits for reducing the difference.
Various techniques are known for sensing the magnitude of the black or white kinescope current. One often used approach employs a PNP emitter follower current sensing transistor connected to the kinescope cathode signal coupling path. Such sensing transistor couples video signals to the kinescope via its base-to-emitter junction, and provides at a collector electrode a sensed current representative of the magnitude of the kinescope cathode current. The representative current from the collector electrode of the sensing transistor is conveyed to the control system and processed to develop a suitable correction signal.
In accordance with the principles of the present invention, there is disclosed a kinescope current sensing arrangement wherein a current sensing device is coupled to a kinescope for providing at an output terminal a signal representative of the magnitude of the kinescope current. A clamping circuit clamps the output terminal to a given voltage during normal image trace intervals. During prescribed kinescope current sensing intervals, however, the clamping circuit is inoperative and the sensed signal representative of the kinescope current is developed at the output terminal. The clamping circuit advantageously facilitates interfacing the current sensing device with control circuits for processing the sensed signal, and assists to maintain a proper operating condition for the current sensing device which, in a disclosed embodiment, also conveys video signals to the display device. In accordance with a feature of the invention, the clamping circuit is self-keyed between clamping and non-clamping states in response to the representative signal at the output terminal.
In the drawing:
FIG. 1 shows a circuit diagram of a kinescope driver stage with associated kinescope current sensing and clamping apparatus in accordance with the present invention; and
FIG. 2 depicts, in block diagram form, a portion of a color television receiver incorporating the current sensing and clamping apparatus of FIG. 1.
In FIG. 1, low level color image representative video signals r, g, b are provided by a source 10. The r, g and b color signals are coupled to similar kinescope driver stages. Only the red (r) color signal video driver stage is shown in schematic circuit diagram form.
Red kinescope driver stage 15 comprises a driver amplifier including an input common emitter amplifier transistor 20 arranged in a cascode amplifier configuration with a common base amplifier transistor 21. Red color signal r is coupled to the base input of transistor 20 via a current determining resistor 22. Base bias for transistor 20 is provided by a resistor 24 in association with a source of negative DC voltage (-V). Base bias for transistor 21 is provided from a source of positive DC voltage (+V) through a resistor 25. Resistor 25 in the base circuit of transistor 21 assists to stabilize transistor 21 against oscillation.
The output circuit of driver stage 15 includes a load resistor 27 in the collector output circuit of transistor 21 and across which a high level amplified video signal is developed, and opposite conductivity type emitter follower transistors 30 and 31 with base inputs coupled to the collector of transistor 21. A high level amplified video signal R is developed at the emitter output of follower transistor 30 and is coupled to a cathode electrode of an image reproducing kinescope via a kinescope arc current limiting resistor 33. A resistor 34 in the collector circuit of transistor 31 also serves as a kinescope arc current limiting resistor. Degenerative feedback for driver stage 15 is provided by series resistors 36 and 38, coupled from the emitter of transistor 31 to the base of transistor 20.
A diode 39 connected between the emitters of transistors 30 and 31 as shown is normally reverse biased and therefore nonconductive by the voltage difference across it equalling the sum of the two base-emitter voltage drops of transistors 30 and 31, but is forward biased and therefore rendered conductive under certain conditions in response to positive-going transients at the emitter of transistor 30, corresponding to the output terminal of driver stage 15. The arrangement of transistor 31 prevents the amplifier feedback loop including transistors 20, 21 and 31 and resistors 36 and 38 from being disrupted, thereby preventing feedback transients and signal ringing from occurring. Additional details of the arrangement including transistors 30 and 31 and diode 39 are found in my copending U.S. patent application Ser. No. 758,954 titled "FEEDBACK DISPLAY DRIVER STAGE".
The emitter voltage of transistor 30 follows the voltage developed across load resistor 27, and transistor 30 conducts the kinescope cathode current. Substantially all of the kinescope cathode current flows as collector current of transistor 30, through a kinescope arc current limiting protection resistor 37a, to a clamping network 40. Transistor 30 acts as a current sensing device in conjunction with network 40 as will be explained. Clamping network 40 in this example is self-keyed to exhibit clamping and non-clamping states in response to the magnitude of the current conducted by transistor 30.
Clamping network 40 is common to all three driver stages of the receiver, as will be seen subsequently in connection with FIG. 2, and is coupled to the green and blue signal driver stages via protection resistors 37b and 37c. Network 40 includes clamping transistors 41 and 42 arranged in a Darlington configuration, and series voltage divider resistors 43 and 44 which bias clamp transistors 41 and 42. A high frequency bypass capacitor 46 filters signals in the collector circuit of transistor 30 in a manner to be described below. The series combination of a mode control switch 49 and a scaling resistor 48 is coupled across resistors 43 and 44. A voltage related to the magnitude of kinescope current is developed at a terminal A and, as will be explained with reference to FIG. 2, the voltage at terminal A can be used in conjunction with a feedback control loop to maintain a desired kinescope operating current condition which is otherwise subject to deterioration due to kinescope aging and temperature effects, for example.
Assuming switch 49, the function of which will be explained below, is open, the kinescope cathode current flowing in the collector of transistor 30 is conducted to ground via resistors 43 and 44. When this current causes a voltage drop across resistor 44 to sufficiently forward bias the base-emitter junctions of transistors 41 and 42, transistor 42 will conduct in a linear region, and will clamp terminal A to a voltage VA according to the following expression, where V BE41 and V BE42 are the base-emitter junction voltage drops of transistors 41 and 42: VA=(V BE41 +V BE42 ) (R43+R44)/R44
During normal image intervals typically there are greater than approximately 25 microamperes of current conducted by transistor 30, which is sufficient to render transistors 41 and 42 conductive for developing clamping voltage VA at terminal A. At other times, as will be discussed, transistors 41 and 42 are rendered nonconductive whereby clamping action is inhibited and a (variable) voltage is developed at node A as a function of the magnitude of the kinescope cathode current, for processing by succeeding control circuits.
Illustratively, the arrangement of FIG. 1 can be used in connection with digital signal processing and control circuits in a color television receiver employing digital signal processing techniques, as will be seen in FIG. 2. Such control circuits include an input analog-to-digital converter (ADC) for converting analog voltages developed at terminal A to digital form for processing.
When the control circuits are to operate in an automatic kinescope black current (bias) control mode, wherein during image blanking intervals the kinescope conducts very small cathode currents on the order of a few microamperes, approximating a kinescope black image condition, clamp transistors 41 and 42 are rendered nonconductive because such small currents flowing through resistors 43 and 44 from the collector of transistor 30 are unable to produce a large enough voltage drop across resistor 44 to forward bias transistors 41 and 42. Consequently terminal A exhibits voltage variations, as developed across resistors 43 and 44, related to the magnitude of kinescope black current. The voltage variations are processed by the control circuits coupled to terminal A to develop a correction signal, if necessary, to maintain a desired level of kinescope black current conduction by feedback action. In this operating mode switch 49, e.g., a controlled electronic switch, is maintained in an open position as shown in response to a timing signal VT developed by the control circuits.
When the control circuits are to operate in an automatic kinescope white current (drive) control mode wherein during image blanking intervals the kinescope conducts much larger currents representing a white image condition, switch 49 closes in response to timing signal VT, thereby shunting resistor 48 across resistors 43 and 44. The value of resistor 48 is chosen relative to the combined values of resistors 43 and 44 so that the larger current conducted via the collector of transistor 30 divides between series resistors 43, 44 and resistor 48 such that the magnitude of current conducted by resistors 43 and 44 is insufficient to produce a large enough voltage drop across resistor 44 to render clamping transistors 43 and 44 conductive. Unclamped terminal A therefore exhibits voltage variations related to the magnitude of kinescope white current, which voltage variations are processed by the control circuits to develop a correction signal as required. As used herein, the expression "white current" refers to a high level of individual red, green or blue color image current, or to combined high level red, green and blue currents associated with a white image.
With the illustrated configuration of transistors 41 and 42 clamping voltage VA is relatively low, approximately +2.0 volts. The clamping voltage could be provided by a Zener diode rather than the disclosed arrangement of Darlington-connected transistors 41 and 42, but the disclosed clamping arrangement is preferred because Zener diodes with a voltage rating less than about 4 volts usually do not exhibit a predictable Zener threshold voltage characteristic, i.e., the "knee" transition region of the Zener voltage-vs-current characteristic is usually not very well defined. In addition, the disclosed transistor clamp operates with better linearity than a Zener diode clamp and radiates less radio frequency interference (RFI).
The relatively low clamping voltage is compatible with the analog input voltage requirements of the analog-to-digital converter (ADC) at the input of the control circuits which receive the sensed voltage at terminal A as will be explained in greater detail with respect to FIG. 2. In this example the ADC is intended to process analog voltages of from 0 volts to approximately +2.5 volts, and the clamping voltage assures that excessively high analog voltages are not presented to the ADC during normal video signal intervals.
The relatively low clamping voltage also assists to prevent transistor 30 from saturating, which is necessary since transistor 30 is intended to operate in a linear region. To achieve this result and to maximize the cathode current conduction capability of transistor 30, the clamping voltage should be as low as possible to maintain a suitably low bias voltage at the collector of transistor 30. On the other hand, the value of arc current limiting resistor 37a should be large enough to provide adequate arc protection without compromising the objective of maintaining the collector bias voltage of transistor 30 as low as possible. Operation of transistor 30 in a saturated state renders transistor 30 ineffective for its intended purpose of properly conveying video drive signals to the kinescope cathode, and for conveying accurate representations of cathode current to clamping network 40 particularly in the white current control mode when relatively high cathode current levels are sensed. In addition, undesirable radio frequency interference (RFI) can be generated by transistor 30 switching into and out of saturation. Also, when saturation occurs transistor base storage effects can result in video image streaking due to the time required for a transistor to come out of a saturated state.
Thus clamping network 40 advantageously limits the voltage at terminal A to a level tolerable by the analog-to-digital converter at the input of the control circuits coupled to terminal A, and protects the analog-to-digital converter input from damage due to signal overdrive. Network 40 also provides a collector reference bias for transistor 30 to prevent transistor 30 from saturating on large negative-going signal amplitude transitions at its emitter electrode. The clamping voltage level is readily adjusted simply by tailoring the values of resistors 43 and 44.
Capacitor 46 bypasses high frequency video signals to ground to prevent transistor 30 from saturating in response to such signals. Capacitor 46 also serves to smooth out undesirable high frequency variations at terminal A to prevent potentially troublesome signal components such as noise from interfering with the signal processing function of the input analog-to-digital converter of the control circuits, e.g., by smoothing the current sensed during the settling time of the analog-to-digital converter.
The latter noise reducing effect is particularly desirable, for example, when the input ADC of the control circuits coupled to terminal A is of the relatively inexpensive and uncomplicated "iterative approximation" type ADC, compared to a "flash" type ADC. The operation of an iterative ADC, wherein successive approximations are made from the most significant bit to the least significant bit, requires a relatively constant or slowly varying analog signal to be sampled during sampling intervals, uncontaminated by noise and similar effects.
The value of capacitor 46 should not be excessively large because a certain rate of current variation should be permitted at terminal A with respect to kinescope cathode currents being sensed. If the value of capacitor 46 is too small, excessive voltage variations, particularly high frequency video signal variations, will appear at terminal A, increasing the likelihood of transistor 30 saturating. The speed of operation of the clamp circuit itself is restricted by an RC low pass filter effect produced by the base capacitance of transistor 41 and the equivalent resistance of resistors 43 and 44.
FIG. 2 shows a portion of a color television receiver system employing digital video signal processing techniques. The FIG. 2 system utilizes kinescope driver amplifiers and a clamping network as disclosed in FIG. 1, wherein similar elements are identified by the same reference number. By way of example, the system of FIG. 2 includes a MAA 2100 VCU (Video Codec Unit) corresponding to video signal source 10 of FIG. 1, a MAA 2200 VPU (Video Processor Unit) 50, and a MAAA 2000 CCU (Central Control Unit) 60. The latter three units are associated with a digital television signal processing system offered by ITT Corporation as described in a technical bulletin titled "DIGIT 2000 VLSI DIGITAL TV SYSTEM" published by the Intermetall Semiconductors subsidiary of ITT Corporation.
In unit 10, a luminance signal and color difference signals in digital form are respectively converted to analog form by means of digital-to-analog converters (DACs) 70 and 71. The analog luminance signal (Y) and analog color difference signals r-y and b-y are combined in a matrix amplifier 73 to produce r, g and b color image representative signals which are processed by preamplifiers 75, 76 and 77, respectively, before being coupled to kinescope driver stages 15, 16 and 17 of the type shown in FIG. 1. A network 78 in unit 10 includes circuits associated with the automatic white current and black current control functions.
The high level R, G and B color signals from driver stages 15, 16 and 17 are coupled via respective current limiting resistors (i.e., resistor 33) to cathode intensity control electrodes of a color kinescope 80. Currents conducted by the red, green and blue kinescope cathodes are conveyed to network 40 via resistors 37a-37c, for producing at terminal A a voltage representative of kinescope cathode current conducted during measuring intervals, as discussed previously.
VPU unit 50 includes input terminals 15 and 16 coupled to terminal A. Through terminal 15 the VPU receives the analog signal from terminal A and, via an internal multiplex switching network 51, the analog signal is supplied to an analog-to-digital-converter (ADC) 52. Terminal 16 is connected to an internal switching device (corresponding to switch 49 in FIG. 1) which, in conjunction with scaling resistor 48, controls the impedance and therefore the sensitivity at input terminal 15. High sensitivity for black current measurement is obtained with resistor 48 ungrounded by internal switch 49, and low sensitivity for white current measurement is obtained with resistor 48 grounded by internal switch 49.
The digital signal from ADC 52 is coupled to an IM BUS INTERFACE unit 53 which coacts with CCU unit 60 and provides signals to an output data multiplex (MPX) unit 55. Multiplexed output signal data from unit 55 is conveyed to VCU unit 10, and particularly to control network 78. Control network 78 provides output signals for controlling the signal gain of preamplifiers 75, 76 and 77 to achieve a correct white current condition, and also provides output signals for controlling the DC bias of the preamplifiers to achieve a correct black current condition.
More specifically, during vertical image blanking intervals the three (red, green, blue) kinescope black currents subject to measurement and the three white currents subject to measurement are developed sequentially, sensed, and coupled to VPU 50 via terminal 15. The sensed values are sequenced, digitized and coupled to IM Bus Interface 53 which organizes the data communication with CCU 60. After being processed by CCU 60, control signals are routed back to interface 53 and from there to data multiplexer 55 which forwards the control signals to VCU 10.






































IF VIDEO SOUND APMPLIFIER AND DETECTOR UNIT
33413-31620

- TDA4445A QUASI PARALLEL SOUND PROCESSING WITH QUADRATURE INTERCARRIER DEMODULATOR





















- TDA4453

Video IF Amplifier for Multistandard TV Receiver and VTR
Appliances
Technology: Bipolar
Features
Interference suppression
Standard B/G-L suitable, processes negatively and
positively modulated IF-signals with equal polarity of
the output signal
Ultra white inverter and ultra black limiter for
reducing transmission interference
Internally noise protected gain control, no flyback
pulses required
Expanded video frequency response allows the
demodulation of amplitude modulated MAC signals
High input sensitivity
Minimal intermodulation interference
Fast AGC by controlled discharge of the
AGC capacitor
Standard L mode: AGC acting on peak white level,
capacitor discharge control by averaged video signal
Standard B/G: AGC acting on the sync. pulse peak
Small differential error
Constant input impedance
Video output voltage with narrow tolerance
Adapted output for insertion of ceramic transducers as
intrinsic sound trap
Connecting and basic circuitry compatible to the
TEMIC video IF type programme - permits building
block system for video IF module



- U2829B


 SCHNEIDER  STV707  DTV-2-7025-11 (49474A)  CHASSIS DTV2  PIP (PICTURE IN PICTURE) PANEL  PIP39325  BOARD.









































- VCU2133
- VSP2860
- SPU2243
- PIP2250
- CCU PIP











Picture in Picture (PiP) is a feature of some television receivers and similar devices. One program (channel) is displayed on the full TV screen at the same time as one or more other programs are displayed in inset windows. Sound is usually from the main program only.
Picture in Picture requires two independent tuners or signal sources to supply the large and the small picture. Two-tuner PiP TVs have a second tuner built in, but a single-tuner PiP TV requires an external signal source, which may be an external tuner, VCR, DVD player, or a cable box. Picture in Picture is often used to watch one program while waiting for another to start, or advertisements to finish.

History


Adding a picture into an existing picture was done long before affordable PiP was available on consumer products. The first PiP was seen on the televised coverage of the 1976 Montreal Olympics where a Quantel digital framestore device was used to insert a close-up picture of the Olympic flame during the opening ceremony. In 1980, NEC introduced its "Popvision" television (CV-20T74P) [1] in Japan with a rudimentary picture-aside-picture feature: a separate 6" (15 cm) CRT and tuner complemented the set's main 20" (50 cm) screen. It was pricey: its ¥298,000 MSRP was equal to about $1,200 (at $1 = ¥250 [2]), and $1,200 in 1980 had the approximate buying power of $3,000 in 2007 [3].
An early consumer implementation of Picture-In-Picture was the Multivision set-top box; it was not a commercial success. Later PiP became available as a feature of advanced television receivers, Like the SCHNEIDER STV707 DTV-2-7025-11 (49474A) CHASSIS DTV2 PIP here in collection !!

Technology Overview:

Picture-in-picture means the insertion of a second programs picture on the screen of a CTV receiver (at reduced size) simultaneously with the full-size main picture. The second, smail picture may origine from anofher TV"transmitter, from a video recorder, a monitor camera or another source. It allows monitoring of the second channel while watching the main channel. Main requirementfor picture-in-picture is to store the content of the small picture when it is supplied by its source, and to deliver the content at the proper Instant when it must be inserted into the main picture which is received and displayed continuously. For storing the content of the second, small picture, two standard 64 K dynamic RAMs (16 x 4) are used, thus makingthe storage simple and economic. Todays picture-in-picture fits neatless Into the wellknown DIGIT2000 system, but is also suitable for stand-alone applications. The PIP2250 is a fast signal processor in CMOS technology which is used to filter (for anti-aliasing) and to decimate the digital Y, R-Yand B-Y signal supplied by the VSP2850 VideoSync Processor, to control the DRAMs for storing the small pictures content and for reading the same at the proper time for display. Further, a border generator supplies the borderline for the small picture VSP2850 VideoSync Processor (40-Pin Plastic Package).

The VSP2850
is a digital signal processor in NMOS technology, which is able to cover all functions of digital signal processing In the video and sync section of a digital TV receiver which normally are combined" in the VPU and DPU processors and the MCU clock generator of the DIGIT2000 digital TV system. The VSP2850 is intended for the sec9iid video channel in digital TV receivers equipped with the picture-inpicture facility. Main features of the VSP2850 VideoSync Processor are: - luma channel with delay compensation, color trap, peaking filter, contrast multiplier and limiter - chroma channel with color demodulator, ACC, color killer, color saturation multiplier, limiter and chroma multiplexer - user-adjustment of contrast, color saturation, hue etc. - sync separation section with sync slicer, horizontal PLL, vertical separation, vertical counter, horizontal decoder and vertical decoder, output pulse generation - clock generation on-Chip, or external clock.

Picture–in–Picture Processor PIP2250

1. Introduction
The so–called picture–in–picture facility has been introduced
for the first time by ITT in 1977, using the UAA
1000 and SAA 3000 integrated circuits. Picture–in–picture
means the insertion of a second program’s picture
on the screen of a
CTV receiver (at reduced size) simultaneously
with the full–size main picture. The second
small picture may originate from another TV transmitter,
from a video recorder, a monitor camera or another
source. It allows monitoring of the second channel while
watching the main channel. Main requirement for picture–
in–picture is to store the content of the small picture
when it is supplied by its source, and to deliver the content
at the proper instant when it must be inserted into
the main picture which is received and displayed continuously.
In the past, at the first attempts of picture–in–picture, the
memory for storing the content of the small picture was
analog, a bucket brigade MOS device, according to the
state of the art at this time. Today’s state of the art is digital:
ITT’s DIGIT 2000 system with its digital processing
of the video signals opens new possibilities for picture–
in–picture which are only feasible in a digital system. For
storing the content of the second, small picture, two
standard 64 K dynamic RAMs (16 K x 4) are used, thus
making the storage simple and economic. If it is intended
to store up to four small pictures, two 256 K DRAMs (64
K x 4) are required. Page mode must be provided in both
cases.
Today’s picture–in–picture fits neatly into ITT’s DIGIT
2000 system, but is also suitable for stand–alone applications.
1.1. General Description
The PIP 2250 Picture–in–Picture Processor is a fast signal
processor in CMOS technology which is used to filter
(for anti–aliasing) and to decimate the digital Y, R–Y and
B–Y signals supplied, e.g., by the VSP 2860 Video/Sync
Processor, to control the DRAMs for storing the small
picture’s content and for reading the same at the proper
time for display. Further, a border generator supplies the
borderline for the small picture. the PIP 2250 is housed
in a 68–pin PLCC package, and is compatible to the
DIGIT 2000 system of digital signal processors with respect
to signal levels as well as pin configuration, supply
voltage, clock frequency etc.
A coarse block diagram of the PIP 2250 is shown in Fig.
1–1. The input picture processing section receives the
digitized information of the small, second picture to be
inserted into the main picture, in the shape of the so–
called input YUV bus, from the VSP 2860 Video Sync
Processor or a similar source, together with the associated
clock, skew, horizontal and vertical blanking signals.
The DRAM interface gives the filtered and decimated
YUV and sync information to the DRAM for
storing till the proper instant for insertion into the main
picture has come. At this time, the DRAM’s content is
read and processed in the output picture processing
section, which receives its required clock, skew and
blanking signals from the main system into whose picture
the second small picture is intended to be inserted.
The output picture processing section supplies the small
picture’s content in the shape of the output YUV bus,
which is connected to the YUV bus supplied by the main
picture’s video processing section (Fig. 1–2). By means
of the ODOUT
Outputs Disable signal supplied by the
PIP 2250 via pin 47, the main video section is disabled
during the time of the small picture.



 1.2. Features
Main features of the PIP 2250 Picture–in–Picture Processor
are
– digital video filters for anti–aliasing and data decimation
– control of the two DRAMs for storage of the small picture(
s)
– control and supervision of the PIP 2250 via the IM bus
– full compatibility with the DIGIT 2000 system
1.3. Environment
The block diagram of the video section of a digital TV receiver
according to the DIGIT 2000 concept, which is
equipped with the picture–in–picture facility, is shown in
Fig. 1–2. Besides the well known DIGIT 2000 chip set,
shown in the upper part of Fig. 1–2, there is the section
for the second (small) picture. This section is composed
of the VAD 2150 Video A/D Converter, the VSP 2860
Video/Sync Processor, optionally a SECAM processor,
the PIP 2250 Picture–in–Picture Processor and two
DRAMs.




2.3. Pin Descriptions
Pins 1, 19 and 51 – Ground
These pins must be connected to the negative of the
supply.
Pins 2 to 9 – A7 to A0 RAM Address Outputs (Fig. 2–11)
By means of these outputs, the external DRAMs are addressed.
Pins 10 to 17 – IO7 to IO0 RAM Data Inputs/Outputs
(Fig. 2–8)
When writing the DRAMs, these pins are the data outputs,
and when reading the DRAMs, they act as data input.
Pins 18, 49 and 67 – VSUP Supply Voltage
This pins must be connected to the positive of the supply.
Pin 20 – CAS Column Address Strobe Output (Fig. 2–11)
This output supplies the column address strobe signal
for the external DRAMs.
Pin 21 – RAS Row address Strobe Output (Fig. 2–11)
This output supplies the row address strobe signal for
the external DRAMs.
Pin 22 – WE Write enable Output (Fig. 2–11)
This output supplies the write enable signal for the external
DRAMs
Pin 23 – FSIN Fast Switching Input (Fig. 2–2)
This input serves for enabling the analog RGB inputs.
Pins 24 to 26 – Analog RGB Inputs (Fig. 2–12)
Via these inputs, the PIP 250 receives analog RGB signals,
e.g. Teletext or video recorder (SCART), which are
fed to the analog RGB outputs to be given to the VCU.
Pins 27 to 29 – Analog RGB Outputs (Fig. 2–12)
these outputs either supply the analog RGB signals,
which have been received via the analog RGB input pins
24 to 26, to the VCU, or are the digital outputs for the
analog border (with CMOS level).
Pin 30 – FSOUT Fast Switching Output (Fig. 2–11)
This output supplies a switching signal for enabling the
analog RGB inputs of the VCU.
Pin 31 – C0 Chroma Output and Msync Input (Fig. 2–9)
This input/output, which, in its output function, can be
disabled by the
CCU via the IM bus, on the one hand
supplies the LSB of the (R–Y) and (B–Y) digital color difference
signals, which are multiplexed on four lines, to
the VCU Video Codec for D/A conversion. On the other
hand, pin 31 acts as input for the Msync multiplex sync
signal when operating in the digital insertion mode.
Pins 32 to 34 – C1 to C3 chroma Outputs (Fig. 2–13)
These open–drain outputs, which can be disabled by the
CCU via the IM bus, supply the three LSBs of the (R–Y)
and (B–Y) digital color difference signals multiplexed on
four lines to the VCU Video Codec for D/A conversion.
Pin 35 – Reset Input (Fig. 2–3)
This input is used for hardware reset of the PIP 2250. At
Low level, reset is actuated, and at High level, the PIP
is ready for communication with the CCU.
Pins 36 to 43 – L0 to L7 Luma Outputs (Fig. 2–13)
These open–drain outputs which can be disabled by the
CCU via the IM bus, deliver the processed luminance
signal in a parallel 8–bit code to the VCU Video Codec
for D/A conversion.
Pin 44 – MSKEW Skew Data Input for digital insertion
(Fig. 2–4)
Via this pin the PIP 2250 receives skew data for phase
adjustment of the video information, from the DPU 2553
or DPU 2554 Deflection Processor of the Main system.
or
MHBL Horizontal Blank Input for stand–alone operation
This signal is used internally for horizontal start and for
skew data measurement.
Pin 45 – MHVBIN Horizontal and Vertical blanking Pulse
Input for Main System or Vertical Blanking Pulse Input
for Stand–Alone Systems (Fig. 2–5).
Via pin 45, the PIP 2250 is supplied with the (sandcastled)
delayed horizontal and vertical blanking pulses
by pin 22 of the DPU 2553 or DPU 2554 Deflection Processor
of the Main system, or, with stand–alone solutions,
with the vertical blanking pulse of the Main system.
Pin 46 – IM Bus Port Output (Fig. 2–11)
The output level of this pin can be defined via the IM bus
using bit 3 in address 57.
Pin 47 – ODOUT VPU Outputs Disable Output (Fig.
2–11)
This output must be connected to the outputs disable input
of the PVPU or CVPU Video Processor acting together
with the picture–in–picture system, in order to
disable the main picture during the time the second
small picture is displayed. The output signal of pin 47
has High level during the time the VPU’s outputs must
be disabled. During this time, the PIP’s luma and chroma
outputs are enabled. Vice versa, if pin 47 supplies Low
level, the PIP’s outputs are disabled and the VPU’s luma
and chroma outputs are enabled.
Pin 48 – Blocking Capacitor
for analog skew data measurement and analog delay of
RGB output, ODOUT and FSOUT.
Pin 50 – FM Clock Input (Fig. 2–6)
This pin receives the FM main clock signal for the main
picture from the MCU 2600 or MCU 2632 Clock Generator.
Pins 52 to 54 – IM Bus Connections (Figs. 2–3 and 2–10)
Via these pins, the PIP 2250 is connected to the IM bus
and communicates with the CCU.


 Pin 55 – PHVBIN Horizontal and Vertical Blanking Pulse
Input from PIP Syste
m (Fig. 2–5)
Via pin 55, the PIP 2250 is supplied with the (sandcastled)
delayed horizontal and vertical blanking pulses
by the VSP 2860 Video/Sync Processor of the PIP system
or another suitable source.
Pin 56 – PSKEW Skew Data Input from PIP System (Fig.
2–7)
Via pin 56, the PIP 2250 receives skew data for phase
adjustment of the video information, from the VSP 2860
Video/Sync Processor of the PIP system or another suitable
source.
Pins 57 to 66 – L7 to L2 and C3 to C0 Luma and Chroma
inputs (Fig. 2–7)
Via these inputs, the PIP 2250 receives the digital luma
and chroma signals for the PIP small picture for the VSP
2860 Video/Sync Processor or another suitable source.
The luma signals are parallel in a 6–bit code, the chroma
signals in the shape (R–Y) and (B–Y), time multiplexed
on four lines.
Pin 68 – FP Clock Input (Fig. 2–6)
Via pin 68, the PIP 2250 receives the FP clock signal required
for the PIP small picture, form the VSP 2860 Video/
Sync Processor or another suitable source.
2.4. Pin Circuits
The following figures show schematically the circuitry at
the various pins. The integrated protection structures
are not shown. The letter “N” means N–channel, the letter
“P” P–channel, both enhancement mode.



 3. Functional Description
As can be seen from Fig. 1–1, the PIP 2250 Picture–in–
Picture Processor is made up of four major functional
blocks; input picture processing, output picture processing,
DRAM interface and IM bus interface. For better understanding,
two features used in digital TV receivers
according to the DIGIT 2000 concept may be described
first: skew data and chroma timing synchronization.
3.1. Skew Data
The skew data signal produced by the DPU 2553 or similar
deflection processor or the VSP 2860 Video Sync
Processor is used to align the phase position of the video
signal in the PIP 2250, as shown in Fig. 2–20. The skew
data input is normally High, or at logic 1, when inactive.
At the horizontal start (start of each line), it becomes active
(Low) with a header code of 001 or 011 followed by
5 bits of luma skew data ( or 6 bits if 2H carry is included).
Thus the start of header code is defined as any 0 preceded
by 9 or more 1s.
Luma skew is defined as the phase or time difference
between the sampling clock and the analog horizontal
sync expressed in resolution of 1/32 of the sampling
clock period (Fig. 2–17). This phase difference changes
from line to line because the sampling clock frequency
may not be a multiple of the analog horizontal frequency.
As a result, digital samples on one line may not align vertically
with those from the adjacent lines. For signal processing
in the vertical direction, like in PIP input picture
processing, samples on each line must be interpolated
by the amount of skew so that corresponding samples
on different lines are aligned vertically.
Thus the skew
data defines the horizontal start timing
and carries information about the amount of luma skew.
Notice the horizontal start is NOT derived from the horizontal
blanking.
3.2. Chroma Timing Synchronization
The 4–bit chroma transfer on the YUV bus is time multiplexed
for R–Y and B–Y. There must be some scheme
to synchronize the timing. There are two schemes for
chroma timing synchronization: either for PAL and
NTSC, or for D2–MAC and SECAM.
For the PAL/NTSC scheme, bit 0 of chroma bus no longer
carries video information, but is used as a sync signal
for chroma timing synchronization during vertical blanking.
Using horizontal blanking as the basis for line count,
at the 4th line after vertical blanking trailing edge, chroma
bus bit 0 will be a string of 72 (negative pulses with
25 % duty cycle (Fig. 2–21). The negative pulses are
synchronized to the R–Y LSB timing of chroma bus (Fig.
2–18). In addition, it doubles as the clock for the transmission
of 72 bits of data for VCU control with data from
bit 3 of the chroma bus.
For the D2–MAC/SECAM scheme, chroma synchronization
occurs every horizontal line, again with chroma
bus bit 0 being a string of three 25 % cycle negative
pulses synchronized to the R–Y LSB chroma bus timing
(Fig. 2–16). The sync pulses start after the leading edge
of horizontal blanking and last for 12 clocks.
3.3. Input Picture Processing
The input picture processing block (Fig. 3–2) defines a
window for the input picture to be processed. Parameters
IHS, IVS and IVSI (Fig. 3–1) define the location and
size of this window. Samples within the window are reduced
by a factor of 1/3 in both horizontal and vertical direction,
for a reduction to 1/9 of the original picture size.
Input to the input picture processing is a digitized picture
in the form of an input YUV bus and timing/deflection signals,
as are skew data, horizontal blanking and vertical
blanking. They may come from the VSP 2860 Video/
Sync Processor or a similar source.
Because of the reduction in picture size described
above, internally only 5 bits resolution is needed for luma
(Y) and 6 bits for chroma (UV). This results in only 5 pins
for luma at the input YUV bus. However, four pins are still
needed for the multiplexed chroma bus even though
only 6 bits after demultiplexing are needed.

 Digital/Analog Border
The border for the small picture may be either digital or
analog. The digital border is merged with the small picture
inside the PIP with digital correction for skew and
output with the small picture at output YUV bus. The
analog border is output at the FSOUT Fast Switching
Output pin as border timing pulses with time delay based
on skew added to the intrinsic delay (Fig. 3–6). Digital
border is an inherent part of the small picture while analog
border has to be merged with the small picture in the
VCU.Selection of digital/analog border is via bit 1 of register
44. For digital border, LSBs of register 41 to 43 define the
luma and chroma values while three MSBs of register 43
define eight different analog borders (see IM bus registers,
section 4.2.).
The FSIN Fast Switching Input (pin 23) can be used to
switch over the analog RGB outputs (pins 27 to 29) between
analog border (supplied by register 43) and external
RGB source connected to the analog RGB inputs
(pins 24 to 26). If FSIN is High, the analog RGB inputs
are connected to the analog RGB outputs. The RGB
switch (Fig. 3–6) can also be controlled by software via
IM bus register 57 (bit 1, “RGBE”). If RGBE = 1, the external
RGB source at pins 24 to 26 is connected to the
RGB outputs, pins 27 to 29. If analog border is selected
via IM bus register 44 (bit 1, “BDI” = 0), the 3–bit analog
RGB border of register 43 is switched to the analog RGB
outputs, pins 27 to 29; during the analog border timing
is active.
The priority of the external RGB source can be programmed
by IM bus register 57 (bit 6, “RGBP”). If RGBP
= 1, the priority of the analog RGB inputs and FSIN is
higher than the analog border. Figs. 2–22 to 2–25 illustrate
the timing waveforms of the ODOUT output and the
FSOUT output for different combinations of operating
mode and border selection.



A picture-in-picture television receiver is disclosed in which a television picture to be inset is compressed at a compression rate of 1/n and inset as a small-picture in part of a main television picture or large picture, and a single field memory for small-picture reproduction is provided therein in or from which a video signal can be randomly read and written line by line as a unit. In the single field memory is stored the small-picture video signal line by line by the application of a writing clock in which case the time taken in the writing is less than 1/(n+1) of a horizontal period. Then, from the memory is read the stored small-picture information by the application of a reading clock of n times the frequency of the writing clock during the time that writing is not performed, and supplied to be inset in the main television picture. A small-capacity buffer memory is provided at the prestage or following stage of the field memory to prevent the read/write timing overlap in the field memory irrespective of whether the small-picture and the main television picture are synchronized or not in the transmission systems. Thus, the capacity of the field memory essential for the small-picture is about a half of the conventional one.



Digit 2000 VLSI Digital TV System DIGIVISION ITT Intermetal Timing correction for a picture-in-picture television system:
System performance of picture-in-picture video display systems is dependent on critical timing relationships between the incoming signals and the clock signals used to sample and display both the large picture and small picture signals. Video signals from various sources, e.g. VTR's, tend to have jittering time bases which may cause the small image to appear jagged or tilted. This distortion in the small image may be reduced by effecting adaptive signal delays in the small picture signal responsive to the relative phase of the system clock signal with respect to the horizontal synchronizing pulses of the large and/or small picture signal. One phase measure is used to control an interpolator which combines successive samples of the small picture signal in proportions to develop sample values corresponding to samples that would have occurred had the small picture signal been sampled by a clock properly aligned to the small picture horizontal synchronizing pulses. A second phase measure is used to delay the clock signal used to display the small picture so that the clock pulses that define the edges of the small picture occurs with the same timing relative to the large picture horizontal synchronizing pulses form line-to-line.



1. In a video signal processing system including a source of first video signal having a periodic horizontal line synchronizing signal component and a memory for holding sampled data representing a second video signal, apparatus for processing said sampled data in synchronism with said first video signal comprising:
means coupled to said source for developing horizontal synchronizing pulses representing the horizontal line synchronizing signal component of said first video signal:
a terminal for applying a clock pulse signal wherein the occurrence of clock pulses possibly exhibits varying amounts of skew relative to said horizontal synchronizing pulses;
skew measuring means coupled to said clock signal terminal and responsive to said horizontal synchronizing pulses for generating a control signal corresponding to the difference in time, as a proper fraction of the period of said clock pulse signal, between the occurrence of a horizontal synchronizing pulse and a pulse of said clock signal;
means coupled to said clock signal terminal, for controlling the reading of the sampled data from said memory; and
skew correcting means coupled to said clock signal terminal, to said memory and to said skew measuring means for effecting a time displacement of the signal represented by the sampled data read from said memory, the magnitude of said time displacement being determined by said control signal.
2. The apparatus set forth in claim 1 wherein said skew correcting means comprises:
means coupled to said clock signal terminal and responsive to said control signal for effecting a time displacement of said clock signal to develop a skew corrected clock signal; and
means for applying said skew corrected clock signal to said means for controlling the reading of sampled data from said memory.
3. The apparatus set forth in claim 2 wherein:
said skew measuring means includes means for measuring the time interval between the center point of a pulse of said horizontal line synchronizing signal and a transition of the pulse of said clock signal which occurs in time immediately prior to said center point.
4. The apparatus set forth in claim 1 wherein said skew correcting means comprises:
means for generating samples corresponding to the sums of first and second consecutive samples read from said memory and scaled by respective first and second scale factors proportional to said control signal.
5. The apparatus set forth in claim 1 wherein said skew correcting means comprises:
means for scaling the values of first and second consecutive samples read from said memory by first and second mutually complementary scale factors proportional to said control signal; and
means for combining the first and second scaled samples to develop samples representing said time displaced signal.
6. In a video signal processing system including a source of first video signal having a horizontal line synchronizing component and a source of second video signal having a horizontal line synchronizing component, apparatus for processing said second video signal in synchronism with said first video signal comprising:
means coupled to said source of first video signal for developing first horizontal synchronizing pulses representing the horizontal synchronizing component of said first video signal;
means coupled to said source of second video signal for developing second horizontal synchronizing pulses representing the horizontal line synchronizing component of said second video signal;
a terminal for applying a clock pulse signal, wherein the occurrence of clock pulses possibly exhibits respectively different varying amounts of skew relative to said first and second horizontal sync pulses;
means coupled to said source of second video signal for developing samples representing said second video signal at instants in time determined by said clock signal;
first skew measuring means coupled to said clock signal terminal and responsive to said second horizontal synchronizing pulses for generating a first control signal corresponding to the time difference between the occurrence of one of said second horizontal synchronizing pulses and a pulse of said clock pulse signal;
first skew correcting means responsive to said first control signal and coupled to said sampling means for modifiying the values of samples provided thereby to effect a time displacement of the signal represented by said samples, the magnitude of said time displacement being determined by said first control signal;
memory means coupled to said skew correcting means for storing samples representing said time displaced second signal;
second skew measuring means responsive to said clock signal and to said first horizontal synchronizing pulses for generating a second control signal corresponding to the time difference between the occurrence of one of said first horizontal synchronizing pulses and a pulse of said clock signal;
means coupled to said clock signal terminal for controlling the reading of the sampled data from said memory means; and
second skew correcting means coupled to said clock signal terminal, to said memory and to said skew measuring means for effecting a time displacement of the signal represented by the sampled data read from said memory, the magnitude of said time displacement being determined by said second control signal.
7. The apparatus set forth in claim 6 wherein said second skew correcting means comprises:
means coupled to said clock signal terminal and responsive to said second control signal for effecting a time displacement of said clock signal to develop a skew corrected clock signal; and
means for applying said skew corrected clock signal to said means for controlling the reading of sampled data from said memory.
8. The apparatus set forth in claim 6 wherein said second skew correcting means comprises:
means for generating samples corresponding to the sums of first and second consecutive samples read from said memory and scaled by respective first and second scale factors proportional to said second control signal.
9. The apparatus set forth in claim 6 wherein said second skew correcting means comprises:
means for scaling the values of first and second consecutive samples read from said memory by first and second mutually complementary scale factors proportional to said second control signal; and
means for combining the first and second scaled samples to develop samples representing said time displaced signal.
10. The apparatus set forth in claim 6 wherein:
said first skew measuring means comprises means for measuring the time interval, as a proper fraction of a period of said clock signal, between a predetermined point on a pulse of said second horizontal line synchronizing signal and a transition of a pulse of said clock signal which is adjacent in time to said predetermined point; and
said second skew measuring means comprises means for measuring the time interval, as a proper fraction of a period of said clock signal, between a predetermined point on a pulse of said first horizontal line synchronizing signal and a transition of a pulse of said clock signal which is adjacent in time to said predetermined point.
11. The apparatus set forth in claim 10 wherein said first skew correcting means includes means for scaling the values of first and second consecutive samples representing said second signal by a factor proportional to said first control signal and by a factor proportional to the complement of said first control signal respectively and means for adding the first and second scaled samples to develop a first sample representing said time displaced signal. 12. In a picture-in-picture television display system including a source of first video signal having a periodic horizontal line synchronizing signal component and a source of second video signal having a periodic horizontal line synchronzing signal component, apparatus for processing said second video signal in synchronism with said first video signal comprising:
means including a memory for processing said second video signal to develop sampled data in said memory representing said second video signal;
a terminal for applying a clock pulse signal wherein the occurrence of pulses of said clock signal possibly exhibits varying amounts of skew relative to the horizontal synchronizing pulses of said first video signal;
skew measuring means coupled to said clock signal terminal and responsive to said horizontal synchronizing pulses of said first signal for generating a control signal corresponding to the amount time, as a proper fraction of the period of said clock signal, between the occurrence of a horizontal synchronizing pulse and a pulse of said clock signal;
skew correcting means coupled to said clock signal terminal and responsive to said control signal for effecting a time displacement of said clock signal to develop a skew corrected clock signal:
means coupled to said skew correcting means and to said memory for extracting the sampled data therefrom in synchronism with said skew corrected clock signal; and
multiplexing means coupled to said sampled data extracting means and to said source of first video signal for selectively providing signals from said source of first video signal and from said memory to a display device.
13. The apparatus set forth in claim 12 wherein:
said skew measuring means includes means for measuring the time interval between a predetermined point on a pulse of said horizontal line synchronizing signal and a transition of the pulse of said clock signal which occurs immediately prior to said predetermined point; and
said skew correcting means includes means for delaying said clock signal by an amount of time approximately equal to said time interval to develop said skew corrected clock signal.
14. The apparatus set forth in claim 12 wherein said means for processing said second video signal comprises:
means coupled to said source of second video signal for developing further horizontal synchronizing pulses representing the horizontal line synchronizing signal component of said second video signal;
means coupled to said source of second video signal for developing samples representing said second video signal at instants in time determined by said clock signal;
further skew measuring means coupled to said clock signal terminal and responsive to said further horizontal synchronizing pulses for generating a further control signal corresponding to the amount of time, as a proper fraction of the period of said clock signal, between the occurrence of a further horizontal sync pulse and a pulse of said clock signal;
further skew correcting means coupled to said sample developing means and to said clock signal terminal and responsive to said further control signal for effecting a time displacement of the signal represented by the samples provided by said sample developing means;
means coupled to said further skew correcting means for applying selected ones of the samples provided thereby to said memory.
15. The apparatus set forth in claim 14 wherein,
said second video signal may include a color synchronizing burst signal component; and
the clock pulse signal applied to said clock terminal is synchronized in frequency and phase to said color synchronizing burst signal component.
16. The apparatus set forth in claim 14, wherein:
said first and second video signals include respective first and second chrominance signal components including respective first and second color synchronizing burst signal components;
the clock pulse signal applied to said clock terminal is synchronized in frequency and phase to said first color synchronizing burst signal component;
the chrominance signal components of the samples provided by said sample providing means tend to have phase errors relative to the samples which would be provided if the clock signal were locked in frequency and phase to the second color synchronizing burst signal component; and
means coupled to said sample providing means and responsive to said second color synchronizing burst signal component for substantially correcting said phase errors.
17. In a picture-in-picture television display apparatus including a source of first video signal having a periodic horizontal line synchronizing component, means for applying a clock pulse signal wherein the occurrence of clock pulses may exhibit varying amounts of skew relative to said horizontal line synchronizing component, a memory for holding sampled data representing a second video signal, means for displaying the image represented by said first video signal and means for reading the sampled data from said memory and for displaying the image represented by said samples as an inset in the image represented by said second video signal, wherein the improvement comprises:
skew measuring means responsive to said clock signal and to said horizontal synchronizing pulses for generating a control signal corresponding to the difference in time, as a proper fraction of the period of said clock signal between the occurrence of a horizontal synchronizing pulse and a pulse of said clock signal; and
skew correcting means responsive to said clock signal and coupled to said memory and to said skew measuring means for effecting a time displacement of the sampled data read from said memory, the magnitude of said time displacement being determined by said control signal.
Description:
This invention relates to apparatus for reducing the visibility of timing errors in the inset image of a picture in picture (PIP) television display system.
In a PIP system, two images from possibly unrelated sources are displayed simultaneously as one image. The composite image includes a full size primary image and a reduced size secondary image displayed as an inset. The subjective quality of the inset portion of the composite image may be affected by timing errors in either the primary or secondary signals.
The timing errors relevant to the present invention occur when either the primary or secondary signal is a nonstandard signal. As used in this application, the term nonstandard signal means a video signal having a horizontal line period which may vary in width by, for example, 4 ns or more from the horizontal line period set by the signal standard to which the video signal nominally conforms (e.g. NTSC, PAL, or SECAM).
To understand how these timing errors may affect the inset image, it is helpful to know how the secondary signal is processed and displayed. In a conventional PIP display system, the secondary signal is sampled at instants determined by a sampling clock signal which, desirably, bears a fixed relationship to the horizontal line scanning frequency of the secondary signal. To aid separation of the luminance and chrominance components of color television signals, the sampling clock signal has a frequency that is a multiple of the chrominance subcarrier frequency which is itself a harmonic of one-half the horizontal line scanning frequency. This sampling clock signal may be developed by a phase locked loop which locks the clock signal to the color reference burst component of the composite video signals.
The secondary signals are separated into their component parts, generally a luminance signal and two color difference signals, and then subsampled both vertically and horizontally to develop signals which represent a reduced-size image. The lines of samples taken during one field of the secondary signal are stored in a memory. These samples are then read from the memory for display using a clock signal which is desirably related to the horizontal line scanning frequency of the primary signal.
When the secondary signal originates from a video tape recorder (VTR), video disk player or home computer, the frequency of the color burst signal may be relatively stable while the frequency of the horizontal line scanning signal may vary significantly from line to line. This variation may be caused by stretching of the tape, defects in the disk, motor speed variations in either the VTR or disk player, or inaccuracies in the frequencies used by the home computer. Since the sampling clock signal is locked to the burst signal, corresponding sampling points on successive lines may be shifted or skewed relative to each other. When these lines of samples are displayed in synchronism with the primary signal, the corresponding samples do not line up vertically. Consequently vertical lines in the inset image may appear jagged, if the timing errors randomly change the period of the horizontal sync signal, or tilted if there is a fixed error in the horizontal sync period. Assuming a 3:1 reduction in the secondary image, a timing difference of 12 ns or more in successive horizontal line periods of the secondary signal may produce noticeable skew distortion in the inset image.
Timing errors in the primary signals change the relative time difference between primary horizontal sync pulses, which define the edges of the primary image, and the first samples in lines of the inset image. Primary signal timing errors that cause the periods of successive horizontal sync pulses to vary from the applicable signal standard by 4 ns or more may produce noticeable skew distortion in the inset image. This distortion causes the entire inset image to appear jagged or tilted.
To gain a better understanding of skew and the methods which may be used to compensate for it, consider the waveforms shown in FIG. 1. The waveform A represents a portion of one horizontal line of, e.g. luminance signal, including the horizontal synchronizing pulse (note the waveforms of FIG. 1 are not drawn to scale). Waveforms B, C and C' represent sampling (system) clock waveforms. The pulses of waveform B are assumed to occur at the points in time that a subcarrier locked clock, locked to a standard signal, would occur. Put another way, if waveform A corresponds to n lines of an image, then waveform B represents the desired sampling (system) clock for each successive line, i.e. without skew. A clock signal having constant skew may also be desirable. In either a zero skew or a constant skew system, the sampling clock pulse r always occurs at the same point in time relative to the HSYNC pulse. This point in time is represented by the sample S2 on waveform A. Waveform C represents a subcarrier locked clock which exhibits a degree of skew. The number of pulses per line period contained in waveform C may not be constant from line-to-line. Generally, the difference in the number of whole clock pulses in a line period can be compensated for in the phase locked loop which generates the horizontal synchronizing signal. The sampling phase error (skew) which is a fractional portion of a clock period, however, may only be corrected by operation on the samples themselves or on the sampling clock signal.
One method of correction is to adjust the sample values on a line-by-line basis so that the adjusted samples conform to samples that would be taken by a clock with zero skew or with some constant skew. For example, the sample values generated by the clock signal of waveform C may be adjusted to equal or approximate corresponding sample values that would be generated by the clock signal of waveform B. In the FIG. 1, clock pulse r' of waveform C is assumed to correspond to clock pulse r of waveform B. Clock pulse r' is advanced in time or skewed by one-half of one clock period, TS, with respect to clock pulse r. Clock pulse r' generates a sample value S1. Desirably, clock pulse r' should occur coincident with clock pulse r and generate the sample value S2.
Replacing the sample taken coincident with clock pulse r' with a sample having a value approximately equal to S2 effectively advances the timing of the signal taken with the sampling clock signal C so that it matches the signal which would have been taken had the zero-skew sampling clock signal B been used. Neglecting the complications of chrominance decoding, an alternative method of skew correction is to adjust the phase of the sampling clock signal on a line-by-line basis so that it approximately matches the phase of the desired clock signal B or some other clock signal which exhibits equal skew from line to line. The waveform C' represents the clock signal C delayed an amount of time substantially equal to the skew. Samples taken with this delayed clock signal approximate samples taken with the desired clock signal, B.
The first skew correction method may be used to correct skew errors in the secondary signal since it does not affect the phase of the sampling clock signal. It is recalled that the phase of this clock signal cannot be changed without affecting the processing of the secondary chrominance signal components. The second skew correction method may be used to compensate for skew errors in the primary signal when the samples representing the separated luminance and color difference signal components of the secondary image are retrieved from the secondary field memory for display.
SUMMARY OF THE INVENTION
The present invention is embodied in apparatus which compensates for timing errors in a first video signal relative to a second, stored video signal. This apparatus includes circuitry for measuring the time interval between a horizontal synchronizing pulse of the first signal and a pulse of the clock signal which controls the retrieval and display of the second signal. The apparatus further includes circuitry with changes the timing of the second signal relative to the horizontal sync component of the first signal, as the second signal is displayed, to compensate for any variations in the measured time intervals from line-to-line.
BRIEF DESCRIPTION OF THE DRAWINGS
FIG. 1 is a timing diagram useful in describing skew and methods of skew correction.
FIG. 2 is a block diagram of a PIP television display system incorporating the present invention.
FIG. 3 is a block diagram of a digital PIP television display system incorporating the present invention.
FIGS. 4 and 5 are a block diagrams showing skew correction circuitry which may be used in the display devices shown in FIGS. 2 and 3.
FIG. 6 is a block diagram of alternative skew correcting apparatus which may be used in the display devices shown in FIGS. 2 and 3.
DETAILED DESCRIPTION OF THE INVENTION
In the drawings, broad arrows represent busses for multiple-bit parallel digital signals and line arrows represent connections carrying analog signals or single bit digital signals. Depending on the processing speed of the devices, compensating delays may be required in certain of the signal paths. One skilled in the art of digital signal processing circuit design would know where such delays would be needed in a particular system.
FIG. 2 is a block diagram of a PIP display device in which the primary signal is processed using conventional analog apparatus and the secondary signal is processed digitally. This circuitry uses a single clock signal, synchronized to the secondary burst signal, both for sampling and processing the secondary signal and for displaying the secondary image as an inset in the main image.
A source of primary composite video signals 10 applies the primary video signals to a Y/C separation filter 12. Filter 12, which may include conventional low-pass and high-pass filters, separates the composite video signals into primary luminance signals, YP, and primary chrominance signals Cp. The primary luminance and chrominance signals are applied to a primary chroma/luma processor 14 which may include, for example, band shaping filters for peaking the high frequency components of the luminance signals to develop a signal Y'P and a chrominance signal demodulator for deriving the baseband color difference signals (R-Y)P and (B-Y)P from the primary chrominance signals, CP. The signals Y'P, (R-Y)P, and (B-Y)P applied to a matrix 16 which combines the signals to develop the color signals RP, GP and BP. These signals are applied to one set of signal input terminals of an analog multiplexer 26, the output of which drives a cathode ray tube (CRT) 28. The color signals RS, GS and BS developed from the secondary signal are applied to a second set of signal input terminals of the multiplexer 26. These signals are developed by apparatus described below.
A source of secondary composite video signals 50, which may include the tuner, IF amplifier and video detector of a conventional color television receiver, provides secondary composite video signals to an analog-to-digital converter (ADC) 52. ADC 52 samples and digitizes the secondary composite video signals at instants determined by the sampling clock signal CK. A phase-locked-loop (PLL) 56, described below, generates the signal, CK, which has a frequency 4fc substantially equal to four times the chrominance subcarrier frequency, fc. The signal CK is phase locked to the color synchronizing burst component of the secondary video signals.
ADC 52 provides digitized secondary video signals to a Y/C separation filter 54. Filter 54 may be a conventional digital filter having a clock input terminal coupled to receive the signal CK. Filter 54 may include, for example, an FIR filter which passes the chrominance signal components of composite video signal to the relative exclusion of luminance signal components and a subtracter for subtracting the chrominance signal components from the composite signal to develop luminance signal components.
ADC 52 also provides secondary composite video signals to a deflection processing unit (DPU) 60, which includes sync separator circuitry 58 and skew error measuring circuitry 59. The sync separator circuitry 58 and skew measuring circuitry 59 in the illustrated embodiment are components in a phase-locked-loop which produces a horizontal synchronizing signal, SHS, that is phase-locked to the horizontal synchronizing signal component of the secondary signal. Sync separator circuitry 58 applies the signal SHS and a digital value (HSP) containing an integer part and a fractional part representing the period of the signal SHS in units of one-sixteenth of the sampling clock period (1/16 Ts) to the skew measuring circuitry 59. The sync separator circuitry 58 also develops the vertical synchronization signals, SVS, and a burst gate signal, BG, from the digitized secondary composite video signals. The burst gate signal, BG, and the separated chrominance signals from filter 54 are applied to PLL 56. PLL 56 is, for example, a circuit similar to that described in U.S. Pat. No. 4,291,332 entitled "Phase Locked Circuit" which is hereby incorporated by reference.
The clock signal CK is applied to the skew measuring circuitry 59. Exemplary skew measuring circuitry 59 accumulates the fractional part of the horizontal skew period values, HSP, provided by the sync separator circuitry 58 to develop a secondary skew signal, SSK. The integer part of the signal SSK is fed back to the sync separator circuitry 58, where it is used in the phase-locked-loop to update the horizontal sync period measurement. The fractional part of the signal SSK is retained in the accumulator of the skew measuring circuitry 59 and applied as skew values to the skew correcting circuitry 62. As used in the present embodiment, the fractional part of the signal SSK represents the time interval between the center of the respective phase locked horizontal sync pulse and the leading edge of the clock pulse which occurs immediately before the center of the respective horizontal sync pulse. This interval is measured with a resolution substantially equal to one-sixteenth of the period of the signal CK. The sync separator circuitry 58 and the skew measuring circuitry 59 are of the type contained in the integrated circuit DPU 2532 manufactured by ITT Intermetall GmbH and which is described at pages 47-72 of the data book "Digit 2000 NTSC Double-scan VLSI Digital TV System" edition 1985/5 of ITT Intermetall, Freiburg, W. Germany.
Exemplary skew error correcting circuitry 62 is shown in FIG. 4. This circuitry interpolates between successive input samples to provide output samples that are substantially equivalent to the samples which would have been taken synchronous with a sampling clock signal having zero skew. The circuitry shown in FIG. 4 may be divided into two parts, a linear interpolator and a correction circuit. Luminance samples YS are applied to a delay element 410, which delays the samples by one period of the clock signal CK. The delayed samples are applied to a multiplier 412 which scales the samples by a factor K. The factor K may be a value between zero and one and is provided by a read only memory (ROM) 424 in response to the secondary skew signal SSK. Luminance samples YS are also applied to a multiplier 414 which scales these undelayed samples by a factor 1-K, also provided by ROM 424. The samples provided by the multipliers 412 and 414 are summed in adder 416.
The samples provided by adder 416 are linearly interpolated samples. If the frequency components of the sampled signals YS are an order of magnitude or more lower than the sampling frequency, the apparent delay of the interpolated samples is given by the product KTS, where TS is the period of the sampling clock signal CK. As the frequency components of the sampled signals approach the sampling frequency, however, the amount by which Ys appears to have been delayed becomes a function of the levels of its higher frequency components as well as of K. The correction circuit, which includes filter 422, multiplier 428 and adder 420 compensates for the frequency induced delay components. Luminance signals YS are applied to the filter 422 which has the transfer function T422 =-1+Z-1 +Z-2 -Z-3 expressed in Z transform notation. The samples provided by filter 422 are scaled by a factor C in multiplier 428. The factor C is provided by ROM 424 in response to the secondary skew signal, SSK. The samples developed by adder 416 are applied to a delay element 418 which compensates for the processing time through filter 422. These delayed samples are then added to the samples from multiplier 428 by an adder 420.
The combination of the linear interpolator and the correcting filter produce signals having an apparent delay of (1+K)Ts where the signals to be delayed have components with frequencies as high as one-third of the frequency of the sampling clock signal. In the NTSC system, for example, where the sampling clock frequency is approximately 14.3 MHz this skew correcting circuit provides uniformly spaced delays for luminance signals which may have frequency components up to 4.2 MHz. I defines the contents of ROM 424 to achieve delay steps of one-sixteenth of a sampling clock period.
TABLE I
______________________________________
DELAY TOTAL SSK K 1-K C CHANGE DELAY
______________________________________

15 1/16 15/16 1/32 TS /16
17TS /16
14 2/16 14/16 1/32 2TS /16
18TS /16
13 3/16 13/16 2/32 3TS /16
19TS /16
12 4/16 12/16 2/32 4TS /16
20TS /16
11 5/16 11/16 2/32 5TS /16
21TS /16
10 6/16 10/16 3/32 6TS /16
22TS /16
9 7/16 9/16 3/32 7TS /16
23TS /16
8 8/16 8/16 3/32 8TS /16
24TS /16
7 9/16 7/16 3/32 9TS /16
25TS /16
6 10/16 6/16 3/32 10TS /16
26TS /16
5 11/16 5/16 3/32 11TS /16
27TS /16
4 12/16 4/16 2/32 12TS /16
28TS /16
3 13/16 3/16 2/32 13TS /16
29TS /16
2 14/16 2/16 1/32 14TS /16
30TS /16
1 15/16 1/16 1/32 15TS /16
31TS /16
0 1 0 0 TS 2TS
______________________________________
The samples provided by this skew correcting circuit 62 have apparent delays of between 17TS /16 and 2TS. The delay is only apparent because the actual timing of the samples has not been changed. The skew correcting circuit 62 adjusts the sample values in each line of secondary luminance signals so they appear to have been generated using a sampling clock signal which had negligible skew.
The chrominance samples provided by Y/C separation filter 54 are applied to delay element 63 which provides a two sample period delay to compensate for the delay through the skew correcting circuitry 62. Because the chrominance signal has a smaller bandwidth than the luminance signal and because the eye is less sensitive to color transitions than to changes in brightness, skew errors in the chrominance signal are not as noticeable as skew errors in the luminance signal. Accordingly, the apparatus shown in FIG. 1 does not correct skew errors in the chrominance signal. It will be appreciated, however, that delay element 63 may be replaced with a skew correcting circuit similar to circuit element 62.
The luminance samples from skew correcting circuitry 62 and the chrominance samples from delay element 63 are applied to a secondary chroma/luma processor 64. Processor 64 may include, for example, an FIR band shaping filter for peaking the frequency spectrum of the digital luminance signals to provide a modified secondary luminance signal YS ' and a digital chrominance demodulator for developing samples which represent the baseband secondary color difference signals (R-Y)S and (B-Y)S.
The signals YS ', (R-Y)S and (B-Y)S are applied to PIP field memory 68 where they are subsampled and stored under control of the write address generator circuitry 70. Memory 68 may be a conventional random access memory having a sufficient number of storage cells to hold one field of the subsampled secondary signal. This memory may be organized as three separate field memories, one for the luminance signal and one for each of the two color difference signals, or it may be organized as a single field memory with the sampled luminance and color difference signals combined into a single sampled signal. For example, these signals may be combined by alternately concatenating samples of the two color difference signals to samples of the luminance signal.
Data from the secondary chroma/luma processor 64 is written into the field memory 68 under control of the memory address generator circuity 70. The circuitry 70 develops write address signals, WADDR, and other control signals WCS, as may be needed from the clock signal CK, and the secondary vertical and horizontal sync signals SVS and SHS respectively. The write address generator circuitry 70 operates to subsample the secondary signal in, for example, a three-to-one ratio both vertically and horizontally by providing address values and control signals for the memory 68 at appropriate times.
Samples representing lines of the subsampled secondary image are read from the PIP field memory 68 under control of the read address generator circuitry 24. The signals applied to circuitry 24 are the primary vertical and horizontal sync signals, PVS and PHS respectively, and a skew corrected clock signal CK'. The circuitry 24 may for example, count pulses of the horizontal sync signal, PHS, relative to the vertical sync pulses, PVS, and pulses of the signal CK' relative to the primary horizontal sync pulses to determine when to initiate read operations for the memory 68 and when to switch the multiplexer 26 between providing primary and secondary drive signals to the display device 28. Read address generator 24 provides a read address signal, RADDR, and read control signals RCS, to the field memory 68 and a primary/secondary image selection signal, P/S to the multiplexer 26.
The write address generator circuitry 70, read address generator circuitry 24 and field memory 68 are not a part of the present invention and, so, are not described in detail. Exemplary circuitry for subsampling, storing, and retrieving the signal which produces the insert image is described in the U.S. Pat. Nos. 4,249,213 entitled "Picture-in-Picture Television Receiver" and 4,139,860 entitled "Television Receiver Equipped for Simultaneously Showing Several Programs" which are hereby incorporated by reference.
The Read address generator 24, it is recalled, operates in synchronism with the skew corrected clock signal CK'. This signal is generated as follows. Primary composite video signals from source 10 are applied to an ADC 17 which is clocked by the signal CK provided by the PLL 56. ADC 17 applies the sampled primary composite video signals to a DPU 20. DPU 20, which includes sync separator 18 and skew measuring circuitry 19 may be identical to the DPU 60 described above. The sync separator 18 develops the primary vertical sync signal, PVS, and the primary horizontal sync signal, PHS, from the primary composite video signals. The signal PHS, the horizontal sync period value HSP, and the clock signal CK are applied to the skew measuring circuitry 19. Circuitry 19 is functionally identical to the skew measuring circuitry 59 described above. It measures the time difference between the center of each pulse of the signal PHS and the leading edge of the immediately preceding pulse of the clock signal CK. The fractional part of the signal, PSK, provided by the skew measuring circuitry 19 is a four bit value indicating the skew for each primary horizontal scan line in units of one-sixteenth of the period of the clock signal CK. The integer part of the signal PSK is applied to the sync separator 18 as set forth above in reference to DPU 60. The fractional part of the signal PSK and the signal CK are applied to the skew correcting circuitry 22. Circuitry 22 may be a programmable delay element similar to that shown in FIG. 5.
In FIG. 5, the clock signal CK is applied to the input termnal of an inverter I1 which is the first inverter in a chain of thirty series-connected inverters. The inverter chain is organized as fifteen pairs of inverters, I1 and I1 ' through I15 and I15 '. The input terminal to the inverter I1 and the output terminals of all of the pairs, i.e. I1 ', I2 ' . . . I15 ' are connected to respectively different data input terminals of the multiplexer 500. The control input port of multiplexer 500 is coupled to receive the fractional part of the primary skew signal, PSK, provided by the skew measuring circuitry 19. Each pair of inverters in the chain has a signal propogation delay of approximately one-sixteenth of the period of clock signal CK so the output terminals of each of the pairs provide clock signals delayed by between one-sixteenth and fifteen-sixteenths of a clock period. The multiplexer 500 is conditioned by the fractional part of the signal PSK to provide, as its output signal CK', the signal CK when PSK is zero, the signal at the output terminal of inverter of I1 ' when PSK is one, the signal at the output terminal of inverter I2 ' when PSK is two, and so on, providing the signal at the output terminal of inverter I15 ' when PSK is fifteen. Accordingly, the signal CK' provided by the skew correcting circuitry 22 is a clock signal CK delayed by an amount of time approximately equal to the value of the fractional part of PSK times one-sixteenth of the period of the signal CK. As set forth above, in reference to FIG. 1, this signal is a skew corrected clock signal, which is to say a clock signal aligned with the horizontal sync signal PHS from line-to-line.
The samples provided by the memory 68 in synchronism with the skew corrected clock signal CK' are applied to a digital-to-analog converter (DAC) 72 which is clocked by the skew corrected clock signal CK'. DAC 72 provides analog signals representing the secondary luminance and (R-Y) and (B-Y) color difference signals to the matrix 74. Matrix 74 is a conventional analog matrix which converts secondary luminance and color difference signals into the color signals RS, GS, and BS for application to the multiplexer 26 as set forth above.
The analog multiplexer 26 is controlled by the image selection signal P/S provided by the read address generator 24 to apply either primary or secondary signals to the display device 28 to develop composite PIP images.
FIG. 6 is a block diagram showing aternative circuitry to correct for skew in the primary signal. This embodiment uses an interpolation scheme which is the same as is used to correct for the skew of the secondary signal. The read address generator circuitry 24' is clocked by the signal CK but is otherwise the same as the circuitry 24 described in reference to FIG. 2. From the clock signal CK and the primary horizontal and vertical sync signals PHS and PVS, read address generator circuitry 24' develops the read address signal RADDR and the read control signals RCS which control the reading of the subsampled secondary luminance and color difference signals from the PIP field memory 68. The luminance samples, Yss, are applied to skew correcting circuitry 22' which is responsive to the fractional part of the signal PSK. Circuitry 22' may be identical to the skew correcting circuitry 62 described above in reference to FIG. 2. Circuitry 22' interpolates between successive ones of the samples Yss to provide samples having values representing a signal delayed by the skew value. In other words, substantially the same signal as would be represented by the samples read from the memory in synchronism with a skew corrected clock signal. The luminance samples developed by the skew correcting circuitry 22' are applied to a DAC 72'. The (R-Y) and (B-Y) color difference samples provided by the field memory 68' are applied to the DAC 72' via the compensating delay elements 602 and 604 respectively. Delay elements 602 and 604 compensate for processing delay in the skew correcting circuitry 22'. As set forth in reference to the skew correcting circuitry 62, only the luminance signals need skew correction since the eye is less sensitive to changes in color than to changes in brightness. Nonetheless, it is contemplated that the delay elements 602 and 604 may be replaced by skew correcting circuitry similar to the circuitry 22' if skew correction of the color difference samples is found to be desirable. The DAC 72' is clocked by the uncorrected clock signal CK but is otherwise the same as the DAC 72 described with reference to FIG. 2. DAC 72' provides analog luminance and color difference signals representing the reduced secondary signal to the matrix 74.
FIG. 3 is a block diagram of an alternative embodiment of the invention in which both the primary and secondary signals are processed digitally. A single clock signal, PCK, which is phase locked to the primary color synchronizing burst signal, is used for both the primary and secondary processing circuitry. Since the secondary signals are sampled by a clock which is not phase locked to the secondary color burst signal, this embodiment of the invention includes circuitry to adjust the phase of the secondary chrominance signals to ensure proper color reproduction.
In the PIP system shown in FIG. 3, analog composite video signals from a source of primary composite video signals 310 are applied to an ADC 317. ADC 317 is responsive to the primary burst locked clock signal PCK to provide digital samples representing the analog primary video signals. These samples are applied to a Y/C separation filter 312 and to the DPU 320. DPU 320 is, for example, identical to the DPUs 20 and 60 described above. It provides the primary vertical and horizontal synchronization signals, PHS and PVS, a primary burst gate signal, PBG, and a signal, PSK, representing the skew of the clock signal, PCK, relative to the primary horizontal sync signal, PHS, as a proper fraction of the clock period. The Y/C separation filter 312, which may be identical to the filter 54, separates the luminance and chrominance components from the primary composite video signals.
The primary chrominance signals from filter 312 and the burst gate signal PBG from sync separator 318 are applied to the PLL 321. PLL 321, which may contain circuitry identical to that used by the PLL 56, generates the clock signal PCK having a frequency of substantially 4fc that is phase-locked to the color burst component of the primary signal.
The primary luminance and chrominance signal components are applied to the primary chroma/luma processor 314. Chroma/luma processor 314 provides processed luminance signals and (R-Y) and (B-Y) color difference signals to the DAC 315. DAC 315 converts the digital luminance and color difference signals into analog form and applies the analog signals to an RGB matrix 316. Matrix 316 develops the red, green, and blue color signals which represent the primary image, and applies them to a first set of signal input terminals of a multiplexer 326. Multiplexer 326, selects between the color signals representing the primary image and color signals representing the secondary image, which are applied to a second set of signal input terminals, to drive the display device 328. Apparatus which generates the color signals for the secondary image and which generates the selection signal, P/S, for the multiplexer 326 is described below.
Analog composite video signals from a source of secondary composite video signals 350 are applied to an ADC 352. ADC 352 is responsive to the primary sampling clock signal PCK for providing samples representing secondary composite video signals to the Y/C separation filter 354 and to the DPU 360. DPU 360, for example, is identical to the DPUs 20 and 60 described above. It provides the secondary horizontal and vertical synchronization signals, SHS and SVS respectively, a secondary burst gate signal SBG, and a signal, SSK, representing the skew of the clock signal PCK relative to the secondary horizontal sync signal SHS as a proper fraction of the clock period.
Y/C separation filter 354, separates the secondary composite video samples into a luminance signal component and a chrominance signal component. The luminance signal component and the signal SSK from skew measuring circuitry 359 are applied to skew correcting circuitry 362. The circuitry 362 may be identical to the circuitry described with reference to FIG. 4. It produces luminance samples having equal skew from line-to-line relative to the secondary horizontal sync signal SHS. These samples are applied to the secondary chroma/luma processor 364. The chrominance samples from filter 354 are applied to the processor 364 via the delay element 363. Delay element 363 compensates for the processing delays incurred by the luminance samples in the skew correction circuitry 362 by delaying the chrominance samples by two sample periods.
The secondary luma/chroma processor 364 processes the luminance signal and demodulates the chrominance signal into two quadrature phase related color difference signals. In this instance, however, the color difference signals provided by the processor 364 may not be (R-Y) and (B-Y) signals. The demodulator in the chroma/luma processor 364 will provide (R-Y) and (B-Y) signals only when the sampling clock signal has a frequency of 4fc and is phase locked to the color burst component of the secondary signal. In this embodiment, the sampling clock signal used to develop the secondary samples is phase locked to the primary color burst component. Since the primary and secondary signals may be from different sources, there may be phase and frequency differences between their respective color burst signals. Consequently, there may be phase errors in the demodulated color difference signals provided by the processor 364 relative to the (R-Y) and (B-Y) phases of the secondary signal. The present embodiment includes chrominance phase error correction circuitry 365 to detect and correct phase errors in the color difference signals provided by processor 364. This circuit is not a part of the present invention. Suitable circuitry 365 may be built by one skilled in the art from the teachings of the patent application Ser. No. 567,190 entitled "A Digital Video Signal Processing System Using Asynchronous A-to-D Encoding", which is hereby incorporated by reference. Briefly, the circuitry 365 converts the two color difference signals into a phase angle signal and an amplitude signal. The phase signal is compared against a reference phase during the secondary burst interval. The difference between the burst phase and the reference phase is used to correct the phase and amplitude signals in a closed loop control system. The corrected phase and amplitude signals are then processed to develop at least two color difference signals (e.g. (R-Y) and (B-Y)).
The phase corrected color difference signals provided by the circuitry 365 and the luminance signal provided by processor 364 via compensating delay element 367 are applied to the PIP field memory 368. The PIP field memory 368, memory write address generator circutry 370 and memory read address generator circuitry 324 may be similar to the respective field memory 68, and memory write and read address generator circutry 70 and 24 of FIG. 2. The circuitry 370 and 324 are responsive to the clock signal PCK and skew corrected clock signal PCK' respectively, but otherwise operate identically to the circuitry described above.
The skew corrected clock signal PCK' is developed by the skew correction circuitry 322. Circuitry 322, which may be similar to the circuitry 22, delays the clock signal PCK by the measured skew value times one-sixteenth of the period of PCK, to produce a skew corrected clock signal PCK'. It is contemplated that circuitry similar to that shown in FIG. 6 may be used in place of the skew correcting circuitry 622 to correct for the skew of the primary signal.
The samples provided by the PIP field memory 368 under control of the memory output address and timing control circuitry are applied to a DAC 372. DAC 372, synchronous with the skew corrected clock signal PCK', develops analog luminance and (R-Y) and (B-Y) color difference signals representing the secondary image and applies these samples to the matrix 374. Matrix 374 converts these luminance and color difference signals into red, green and blue color signals. These color signals, which represent the secondary image, are applied to the second set of signal input terminals of the analog multiplexer 326 as described above.
Although the embodiments described above use digital processing circuitry and use random access memory for the field store, it is contemplated that similar skew correction circuitry could be used with analog sampled data signals and that analog or digital shift register memories could be used for the field store.

No comments:

Post a Comment

The most important thing to remember about the Comment Rules is this:
The determination of whether any comment is in compliance is at the sole discretion of this blog’s owner.

Comments on this blog may be blocked or deleted at any time.
Fair people are getting fair reply. Spam and useless crap and filthy comments / scrapers / observations goes all directly to My Private HELL without even appearing in public !!!

The fact that a comment is permitted in no way constitutes an endorsement of any view expressed, fact alleged, or link provided in that comment by the administrator of this site.
This means that there may be a delay between the submission and the eventual appearance of your comment.

Requiring blog comments to obey well-defined rules does not infringe on the free speech of commenters.

Resisting the tide of post-modernity may be difficult, but I will attempt it anyway.

Your choice.........Live or DIE.
That indeed is where your liberty lies.

Note: Only a member of this blog may post a comment.